toasters

toasters@lists.teaparty.net

3 participants
13514 discussions

Re: R: Deleting files from snapshots
by Francois Joubert 27 Jun '08

27 Jun '08

Yes, but we have no tapes :) Francois Page, Jeremy wrote: > Would the software vendor require you to delete that file off your tapes > too? I think that's what James was asking. > > > -----Original Message----- > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > On Behalf Of Francois Joubert > Sent: Friday, June 27, 2008 5:12 AM > To: James Beal > Cc: NetApp Toasters List > Subject: Re: R: Deleting files from snapshots > > We have no tapes; historical backup is in many online snapvault copies. > > Francois > > James Beal wrote: > >> Are you going to destroy all the backup tapes ? >> > > > > This message (including any attachments) contains confidential > and/or proprietary information intended only for the addressee. > Any unauthorized disclosure, copying, distribution or reliance on > the contents of this information is strictly prohibited and may > constitute a violation of law. If you are not the intended > recipient, please notify the sender immediately by responding to > this e-mail, and delete the message from your system. If you > have any questions about this e-mail please notify the sender > immediately. > -- Los Angeles · Detroit · Toronto · New York · London · Cologne · Stockholm · Hong Kong · Tokyo · Sydney Imagination · London 25 Store Street South Crescent, London WC1E 7BL, United Kingdom Tel +44 (0)20 7323 3300 Fax +44 (0)20 7323 5801 www.imagination.com This email is confidential and may be privileged and is intended only for the addressee: if you have received it in error please notify the sender and delete it. We strive to make our systems secure but cannot accept any liability for viruses or any other security issue. Imagination Ltd Registered in England and Wales with Company Registration Number 1442096. Registered office: 25 Store Street South Crescent, London WC1E 7BL, United Kingdom Please consider the environment before printing this email.

3 2

SnapManager SQL Errors
by Raj Patel 27 Jun '08

27 Jun '08

Hi, We're just setting up a new SQL server with a SMSQL backup job and we're seeing the following DBCC errors. The SM SQL job has been re-installed and the job setup again as per other servers (ie its the first time we've seen the error). There is also an initiator error but we're not sure why thats listed as an issue - it through the initiator and that IP that the SAN lun's are connected in the first place - [09:22:04.916] *** VERIFY DATABASE AFTER BACKUP 09:22:04.916] Collecting verification information... [09:22:04.916] Getting database backup information from SnapInfo file... [09:22:04.916] Running verification from local server.... [09:22:04.931] Mounting Snapshot [sqlsnap__server-sql1__recent] for Virtual Disk F of Computer server-sql1 [09:22:05.322] WARNING: Unable to get default mount point directory [09:22:05.322] Snapshot will be mounted on subdirectory [MPDisk001] [09:22:05.681] [SnapDrive Error]: There are no initiators connected to the filer "10.1.46.1". (SnapDrive Error Code: 0xc00402e6) [09:22:05.697] Error Code: 0xc00408f0 There are no initiators connected to the filer from verification server. Please check SnapManager report and Event logs for details. Any ideas ? Thanks in advance, Raj.

5 6

Re: R: Deleting files from snapshots
by Francois Joubert 27 Jun '08

27 Jun '08

We have no tapes; historical backup is in many online snapvault copies. Francois James Beal wrote: > Are you going to destroy all the backup tapes ?

1 0

Re: SnapManager SQL Errors
by Raj Patel 27 Jun '08

27 Jun '08

Oliver pointed me in the right direction - After the email to check the preferred SAN address I noticed the SAN was connected via the Data VLAN and not the iSCSI VLAN. The DBA's had also renamed the server which meant the initiator was keeping the drive mapped but it was possibly affecting mounting the snaps – I disconnected and reconnected with an updated initiator name to match the new server name & reconnected on the correct VLAN and it sorted things out. Cheers, Raj. On Fri, Jun 27, 2008 at 11:52 AM, Uddhav Regmi <uddhav.regmi(a)worldnet.att.net> wrote: > Raj, > SWs looks OK and OS too. > > [09:22:05.681] [SnapDrive Error]: There are no initiators >> connected to the filer "10.1.46.1". >> >> (SnapDrive Error Code: 0xc00402e6) >> >> [09:22:05.697] Error Code: 0xc00408f0 > > > what does this show > > filer> iscsi initiator show > No initiators connected === something like this ? > > is this turn on ? > > > > > > Its little tricky to make it work inside the ESX.... > > We use the tool esxcfg-swiscsi to configure it. The software iSCSI initiator > in the VMkernel has a dependency upon the service console, therefore both > the service console and VMkernel must have an IP route to the iSCSI target. > 1. Add a VMkernel port to a vSwitch that has an uplink and route to iSCSI > target > 2. Ensure service console IP interface has a route to the same iSCSI target > 3. Using either the VI Client security profile or the esxcfg-firewall, open > a port in the service console firewall for iSCSI (TCP:3260) > 4. In the command line, enable iSCSI with esxcfg-swiscsi -e command > 5. In the command line, run > 6. At the service console command line, run esxcfg-swiscsi -s > 7. In the VI Client your iSCSI target should become visible. > Open the iSCSI tab in your ESX Server configuration and add the dynamic > address of you filer, probably the same IP as your gateway. > > are these all done > > Can you access the resources from ESX box ( SQL ) to filer ? Even before > heading for backup > > this is interesting, let me know. Please put me in loop > > -----Original Message----- > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On > Behalf Of Raj Patel > Sent: Thursday, June 26, 2008 4:28 PM > To: Uddhav Regmi > Cc: NetApp Toasters List > Subject: Re: SnapManager SQL Errors > > Hi, > > Its a Windows 2003 sp 2 VM server (running on ESX 3.5) using SnapDrive > 4.2.1 and SMSQL 2.1.1 and SQL 2005 > > Three luns f:/g:/h: for database, logs & tmpdb > > Verification server is the same as the SQL server (ie it does its own > dbcc check) > > The SAN connection is via IP address - what needs to be able to > resolve to what ? The SQL server can resolve the SAN and vice versa. > > Cheers, > Raj. > > > > On Thu, Jun 26, 2008 at 10:44 PM, Uddhav Regmi > <uddhav.regmi(a)worldnet.att.net> wrote: >> Raj, >> Can you elaborate more here..... >> >> a) platform infrastructure >> b) SME, Snapdrie, SQL versions >> c) is verification Server and SQL server where you installed SME are same >> server or different server >> d) does the nslookup resolve all the names correctly from all three >> locations >> e) any Dual/multi path involved here.... >> this is interesting error >> >> ~uddhav >> >> -----Original Message----- >> From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > On >> Behalf Of Raj Patel >> Sent: Wednesday, June 25, 2008 6:49 PM >> To: NetApp Toasters List >> Subject: SnapManager SQL Errors >> >> Hi, >> >> We're just setting up a new SQL server with a SMSQL backup job and >> we're seeing the following DBCC errors. The SM SQL job has been >> re-installed and the job setup again as per other servers (ie its the >> first time we've seen the error). There is also an initiator error but >> we're not sure why thats listed as an issue - it through the initiator >> and that IP that the SAN lun's are connected in the first place - >> >> [09:22:04.916] *** VERIFY DATABASE AFTER BACKUP >> >> >> 09:22:04.916] Collecting verification information... >> [09:22:04.916] Getting database backup information from SnapInfo > file... >> [09:22:04.916] Running verification from local server.... >> [09:22:04.931] Mounting Snapshot [sqlsnap__server-sql1__recent] >> for Virtual Disk F of Computer server-sql1 >> [09:22:05.322] WARNING: Unable to get default mount point directory >> [09:22:05.322] Snapshot will be mounted on subdirectory [MPDisk001] >> [09:22:05.681] [SnapDrive Error]: There are no initiators >> connected to the filer "10.1.46.1". >> >> (SnapDrive Error Code: 0xc00402e6) >> >> [09:22:05.697] Error Code: 0xc00408f0 >> There are no initiators connected to the filer from verification >> server. Please check SnapManager report and Event logs for details. >> >> Any ideas ? >> >> Thanks in advance, >> Raj. >> >> >

1 0

Re: SnapManager SQL Errors
by Raj Patel 26 Jun '08

26 Jun '08

Hi, Its a Windows 2003 sp 2 VM server (running on ESX 3.5) using SnapDrive 4.2.1 and SMSQL 2.1.1 and SQL 2005 Three luns f:/g:/h: for database, logs & tmpdb Verification server is the same as the SQL server (ie it does its own dbcc check) The SAN connection is via IP address - what needs to be able to resolve to what ? The SQL server can resolve the SAN and vice versa. Cheers, Raj. On Thu, Jun 26, 2008 at 10:44 PM, Uddhav Regmi <uddhav.regmi(a)worldnet.att.net> wrote: > Raj, > Can you elaborate more here..... > > a) platform infrastructure > b) SME, Snapdrie, SQL versions > c) is verification Server and SQL server where you installed SME are same > server or different server > d) does the nslookup resolve all the names correctly from all three > locations > e) any Dual/multi path involved here.... > this is interesting error > > ~uddhav > > -----Original Message----- > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On > Behalf Of Raj Patel > Sent: Wednesday, June 25, 2008 6:49 PM > To: NetApp Toasters List > Subject: SnapManager SQL Errors > > Hi, > > We're just setting up a new SQL server with a SMSQL backup job and > we're seeing the following DBCC errors. The SM SQL job has been > re-installed and the job setup again as per other servers (ie its the > first time we've seen the error). There is also an initiator error but > we're not sure why thats listed as an issue - it through the initiator > and that IP that the SAN lun's are connected in the first place - > > [09:22:04.916] *** VERIFY DATABASE AFTER BACKUP > > > 09:22:04.916] Collecting verification information... > [09:22:04.916] Getting database backup information from SnapInfo file... > [09:22:04.916] Running verification from local server.... > [09:22:04.931] Mounting Snapshot [sqlsnap__server-sql1__recent] > for Virtual Disk F of Computer server-sql1 > [09:22:05.322] WARNING: Unable to get default mount point directory > [09:22:05.322] Snapshot will be mounted on subdirectory [MPDisk001] > [09:22:05.681] [SnapDrive Error]: There are no initiators > connected to the filer "10.1.46.1". > > (SnapDrive Error Code: 0xc00402e6) > > [09:22:05.697] Error Code: 0xc00408f0 > There are no initiators connected to the filer from verification > server. Please check SnapManager report and Event logs for details. > > Any ideas ? > > Thanks in advance, > Raj. > >

2 1

Re: Deleting files from snapshots
by Fox, Adam 26 Jun '08

26 Jun '08

There is no approved or unapproved way to do this. It's not possible. The closest thing you can do is to put a Datafort in front of the controller and encrypt everything. Then you can shred the keys that encrypted the files in question. It doesn't delete them per se but it makes them unreadable. -- Adam Fox ------------------------ Typed with my thumbs on a very small keyboard. ----- Original Message ----- From: Francois Joubert <francois.joubert(a)imagination.com> To: NetApp Toasters List <toasters(a)mathworks.com> Sent: Thu Jun 26 11:00:46 2008 Subject: Deleting files from snapshots Hi Is it possible to delete a limited set of files from all snapshots without having to delete every snapshot in which those files appear? If the official line is, "No", is there an unapproved way of doing this? Thanks Francois

1 0

SNMP netapp mib question
by Corey Hart 25 Jun '08

25 Jun '08

Hey Guys, So I have used toasterview in the past without any issues, but today I installed it at my new job and I have a question. When running an snmpwalk against the filer, and running the command uptime I see the filer uptime as DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (1664185295) 192 days, 14:44:12.95 But when toastview runs it pulls cpuUpTime for the system uptime shows as 9:23:36:01.60 So my question is what is the difference between cpuUpTime and sysUpTimeInstance ? Thanks, ...corey This message and any attachments (the "Message") may contain confidential, proprietary and/or privileged information and are only for their intended recipient(s). If you are not the intended recipient, you should notify the sender and delete the Message. E-mail transmissions cannot be guaranteed to be secure or error-free. This Message is provided for information purposes and should not be construed as a solicitation or offer to buy or sell any securities or financial instruments, or to provide investment advice in any jurisdiction where the sender is not properly licensed or permitted to do so. This Message is subject to additional conditions and restrictions. Please read them here: http://legal.dimensional.com/email/

2 1

RE: Is there somewhere a list with description/explanation of the /etc/ files?
by Mikkelsen Soren 24 Jun '08

24 Jun '08

Dear Regmi, it's for my own understanding, as well as for those NetApp customer's being die-hard *NIX oriented and desire to understand what's configured in which config file and how. Stephen C. Losen answered by pointing me in the direction of Chapter 5 of the man pages. Kind regards, Soren Soren Mikkelsen Senior System Engineer vcare Infosystems AG Täfernhof Mellingerstrasse 207 CH-5405 Baden-Dättwil Switzerland Tel: +41 56 483 41 00 Direct: +41 56 483 41 17 Mobile: +41 79 798 98 77 Fax: +41 56 483 40 90 E-mail: Soren.Mikkelsen(a)vcare-it.com Web: http://www.vcare-it.com -----Original Message----- From: Uddhav Regmi [mailto:uddhav.regmi@worldnet.att.net] Sent: Monday, June 23, 2008 8:53 PM To: Mikkelsen Soren; toasters(a)mathworks.com Subject: RE: Is there somewhere a list with description/explanation of the /etc/ files? why is this for ? what is the reason you wanted to know all the definitions inside /etc/*.* ?? Can you provide us some valid reason -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of slemmesmi Sent: Monday, June 23, 2008 2:29 PM To: toasters(a)mathworks.com Subject: Is there somewhere a list with description/explanation of the /etc/ files? Would like a list with a description/explanation of the /etc/ files - do you know if there is a such? What I'm looking for is something that would e.g. explain something like: *** /etc/rc - The /etc/rc file contains commands that the storage system executes at boot time to configure the system. Commands in the /etc/rc file configure the storage system to: - Communicate on your network - Use the NIS and DNS services - Save the core dump that might exist if the storage system panicked before it was booted *** I can of course begin to dig out the information from NOW, sysadmin guide etc., but would safe a LOT of time if such a list already exist. -- View this message in context: http://www.nabble.com/Is-there-somewhere-a-list-with-description-explanation -of-the--etc--files--tp18075293p18075293.html Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

2 1

Is there somewhere a list with description/explanation of the /etc/ files?
by slemmesmi 24 Jun '08

24 Jun '08

Would like a list with a description/explanation of the /etc/ files - do you know if there is a such? What I'm looking for is something that would e.g. explain something like: *** /etc/rc - The /etc/rc file contains commands that the storage system executes at boot time to configure the system. Commands in the /etc/rc file configure the storage system to: - Communicate on your network - Use the NIS and DNS services - Save the core dump that might exist if the storage system panicked before it was booted *** I can of course begin to dig out the information from NOW, sysadmin guide etc., but would safe a LOT of time if such a list already exist. -- View this message in context: http://www.nabble.com/Is-there-somewhere-a-list-with-description-explanatio… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

2 2

Is there a way to destroy a plex with out killing the aggr on it?
by Page, Jeremy 23 Jun '08

23 Jun '08

I have enough free space, but when I built my aggregate I didn't have the raid size set properly, so now I have one plex with only 4 disks. Not a good thing when using DP. Is there a way I can blow this away and add those disks to other raid groups with out loosing all my data? Jeremy M. Page________________ Systems Architect Gilbarco Veeder-Root, a Danaher Company 7300 West Friendly Avenue Greensboro, NC 22087 * email:Jeremy.Page@gilbarco.com - * phone: 336.547.5399 - 6 fax: 336.547.5163 - * cell: 336.601.7274 This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters