toasters

toasters@lists.teaparty.net

13514 discussions

Re: Hello - new (old) F630 owner
by mds＠gbnet.net 11 Oct '02

11 Oct '02

The key is the converter frob to allow a DIFF card to drive SE disks. Change card, change disks (and shelf) or get the converter frob. -- -Mark ... an Englishman in London ...

1 0

rateup from filer-mrtg.tar.gz from Netapp core dumps under linux
by Daniel Finn 10 Oct '02

10 Oct '02

Did anybody else have problems with this? It runs fine on a Solaris9 server but when I tried to install it on one of our linux utility servers here the rateup program would core dump. It's RedHat 6.2 running kernel 2.2.19-6.2.1smp, i686.. I would prefer to run it on the linux server so any help would be really appreciated. Thanks Dan

1 0

Two patches for netapp-top.pl
by Daniel Scheibli 10 Oct '02

10 Oct '02

Dear list, I have done two small patches for the netapp-top.pl script (http://now.netapp.com/NOW/download/tools/ntaptop/), which can be found at (http://www.edelbyte.org/html/s05c000m.htm in the patches section). The first one fixes an error when displaying hostsnames which can not be resolved, the other one limits the interval recalculation to more relevant cases. Hope you like it Daniel -- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!

1 0

Re: bringing up a new eth interface on a pci nic card. some question s
by Rune Bakken 10 Oct '02

10 Oct '02

Daniel Finn <DFinn(a)studentadvantage.com> writes: > I'm trying to bring up a new interface on a pci nic card inside my F740. > Without being at the netapp is there any way to see if the nic card is > seeing a good link status. Here's what I have: > > na4m-be> ifconfig -a > e0: flags=200043<UP,BROADCAST,RUNNING> mtu 1500 > inet 10.209.68.211 netmask 0xffffff00 broadcast 10.209.68.255 > ether 00:a0:98:00:52:76 (100tx-fd-up) > e2a: flags=200043<UP,BROADCAST,RUNNING> mtu 1500 > inet 10.221.88.41 netmask 0xfffffff0 broadcast 10.221.88.47 > ether 00:20:fc:1e:20:cc (auto-100tx-up) This port has link > e3a: flags=42<BROADCAST,RUNNING> mtu 1500 > inet 10.221.88.41 netmask 0xfffffff0 broadcast 10.221.88.47 > ether 00:c0:95:e0:f4:00 (auto--down) This doesn't > Is there any type of command such as snoop for > Solaris or tcpdump for linux where I can see raw network traffic? pktt > My other question is how can I force this link to 100FDX. It's cisco gear > on the other side and I know that cisco stuff generally has trouble > auto-negotiating. ifconfig e2a mediatype 100tx-fd You would want to have the cisco side set to the same >>>>>>>>>>>>.rune -- Rune Bakken Senior System Administrator Telenor Business Solutions (Nextra), Communications/IP-Services Ph: +47 22 77 03 93

1 0

bringing up a new eth interface on a pci nic card. some question s
by Daniel Finn 10 Oct '02

10 Oct '02

I'm trying to bring up a new interface on a pci nic card inside my F740. Without being at the netapp is there any way to see if the nic card is seeing a good link status. Here's what I have: na4m-be> ifconfig -a e0: flags=200043<UP,BROADCAST,RUNNING> mtu 1500 inet 10.209.68.211 netmask 0xffffff00 broadcast 10.209.68.255 ether 00:a0:98:00:52:76 (100tx-fd-up) e2a: flags=200043<UP,BROADCAST,RUNNING> mtu 1500 inet 10.221.88.41 netmask 0xfffffff0 broadcast 10.221.88.47 ether 00:20:fc:1e:20:cc (auto-100tx-up) e2b: flags=42<BROADCAST,RUNNING> mtu 1500 ether 00:20:fc:1e:20:cd (auto-unknown-cfg_down) e2c: flags=42<BROADCAST,RUNNING> mtu 1500 ether 00:20:fc:1e:20:ce (auto-unknown-cfg_down) e2d: flags=42<BROADCAST,RUNNING> mtu 1500 ether 00:20:fc:1e:20:cf (auto-unknown-cfg_down) e3a: flags=42<BROADCAST,RUNNING> mtu 1500 inet 10.221.88.41 netmask 0xfffffff0 broadcast 10.221.88.47 ether 00:c0:95:e0:f4:00 (auto--down) e3b: flags=42<BROADCAST,RUNNING> mtu 1500 ether 00:c0:95:e0:f4:01 (auto--down) e3c: flags=42<BROADCAST,RUNNING> mtu 1500 ether 00:c0:95:e0:f4:02 (auto--down) e3d: flags=42<BROADCAST,RUNNING> mtu 1500 ether 00:c0:95:e0:f4:03 (auto--down) lo: flags=200049<UP,LOOPBACK,RUNNING> mtu 1536 inet 127.0.0.1 netmask 0xff000000 broadcast 127.0.0.1 I was at the data center the other day and when I plugged the cat5 in the link light lit up so I'm assuming that is all set. I believe I plugged it into the quad card in slot two, and I no for sure I plugged it into the port labeled "1". I cannot howerver seem to ping other servers on this network, whithin the same subnet. Is there any type of command such as snoop for Solaris or tcpdump for linux where I can see raw network traffic? My other question is how can I force this link to 100FDX. It's cisco gear on the other side and I know that cisco stuff generally has trouble auto-negotiating. Thanks Dan

2 1

AIT-3 drives on a F760 with LVD SCSI
by Moshe Linzer 10 Oct '02

10 Oct '02

I am in the process of upgrading my Qualstar library to AIT-3, and I thought it would be a good idea to ask if anyone is using AIT-3 on a filer? I am installing LVD SCSI cards on my 2 filers to connect directly to the drives, and I want to make sure everything will be compatible. Today the library has AIT-2 drives connected to the filers via SCSI converters. We are running OnTap 6.2.1 for the AIT-3 support. We are using Veritas Netbackup DC 3.4 with NDMP for backup. Thanks, Moshe -- ----------------------------------------------------------------------------- Moshe Linzer | On the Internet, IT Manager | National Semiconductor, Israel | nobody knows you're a moron. Phone: 972-9-970-2247 | Fax: 972-9-970-2001 | - Network Magazine Email: Moshe.Linzer(a)nsc.com | -----------------------------------------------------------------------------

1 0

NetApp/Sun df
by Motoyoshi 10 Oct '02

10 Oct '02

Dear Toasters, I could not find any answers on NOW site/Sun Site... Dose anyone had experience SUN df command displayed "-1" files field ? Environments: F720 w/ONTAP 5.3.6R2 Sun220 w/5.7 Symptoms: Although transmitted to NetApp by ftp. In rarely case , write failed. At this time If the result of df is seen It is -1. In other hosts (HOST-B), it is displayed normally. HOST-A host-a% df /proc (/proc ): 0 blocks 15813 files / (/dev/dsk/c0t0d0s0 ): 123072 blocks 52195 files /usr (/dev/dsk/c0t0d0s6 ): 148284 blocks 214554 files /dev/fd (fd ): 0 blocks 0 files /var (/dev/dsk/c0t0d0s5 ): 1731610 blocks 252653 files /opt (/dev/dsk/c0t0d0s4 ): 1421834 blocks 235910 files /export/home (/dev/dsk/c0t0d0s7 ):60153804 blocks 3800525 files /tmp (swap ): 3128960 blocks 111964 files /netapp (netapp_local:/vol/vol0):472371288 blocks -1 files /tester (netapp_local:/vol/vol0/home/sys_V5):472371288 blocks -1 files /u (netapp_local:/vol/vol0/home/repair_data):472371288 blocks -1 files /tester/INS (netapp_local:/vol/vol0/home/INS):472371288 blocks 7206566 files /user1 (netapp_local:/vol/vol0/user1):19177520 blocks -1 files /user2 (netapp_local:/vol/vol0/user2): 4194304 blocks 7206566 files /user3 (netapp_local:/vol/vol0/user3): 4194304 blocks 7206566 files HOST-B(Normal) host-b% df /proc (/proc ): 0 blocks 7805 files / (/dev/dsk/c0t0d0s0 ): 127416 blocks 47339 files /usr (/dev/dsk/c0t0d0s6 ): 252250 blocks 212855 files /dev/fd (fd ): 0 blocks 0 files /var (/dev/dsk/c0t0d0s5 ): 308820 blocks 94841 files /export/home (/dev/dsk/c0t0d0s7 ): 9989440 blocks 734548 files /opt (/dev/dsk/c0t0d0s4 ): 2016614 blocks 253612 files /tmp (swap ): 1439184 blocks 55180 files /netapp (netapp_local:/vol/vol0):472495256 blocks 7206575 files /tester (netapp_local:/vol/vol0/home/sys_V4):472495256 blocks 7206575 files /u (netapp_local:/vol/vol0/home/repair_data):472495256 blocks 7206575 files /user1 (netapp_local:/vol/vol0/user1):19177520 blocks 7206575 files /user2 (netapp_local:/vol/vol0/user2): 4194304 blocks 7206575 files /user3 (netapp_local:/vol/vol0/user3): 4194304 blocks 7206575 files Awaiting your reply by return. Regards, -Motoyoshi

1 0

Self contained shelves moving between filers
by Stephen C. Woods 10 Oct '02

10 Oct '02

If I have a storage shelf with a raidgroup and a volume (say vol3) on it (completely self contained), can I take the shelf and plug it into a different filer and use the volume? Same question but with multiple shelves (assuming that I move the whole set)? <scw> ----- Stephen C. Woods; UCLA SEASnet; 2567 Boelter hall; LA CA 90095; (310)-825-8614 Unless otherwise noted these statements are my own, Not those of the University of California. Internet mail:scw@seas.ucla.edu

3 2

Replacing a SCSI cable
by Igor Schein 09 Oct '02

09 Oct '02

Hi, what is the current recommendation as far as replacing a SCSI cable connecting the filer and the tape library? Does filer need to be rebooted, or is it safe to hot-swap the cable? Thanks Igor

1 0

tape duplication
by Igor Schein 09 Oct '02

09 Oct '02

Hi, I have 2 filers, DLT7000 tape drive attached to one of them, and SuperDLT tape drive attached to the other. What I need is to copy a DLT tape in dump format onto an SDLT tape, but I don't have enough disk space on either filer to restore the source tape. Does there exist a trick which would accomplish that? Thanks Igor

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters