toasters

toasters@lists.teaparty.net

13520 discussions

Performance impact of 6.3 to 6.4 upgrade?
by Davin Milun 01 Aug '03

01 Aug '03

Does anyone have any concrete experience with what the performance impact of the WAFL reorg that upgrading from 6.3.x to 6.4.x causes is? I have some very loaded (almost disk bound) 960C's running 6.3.2, which I need to upgrade to 6.4.1 (because I'm told that the new DS14 Mk2 shelves that we're adding are not supported by 6.3.x). And I'm worried about the performance impact of the upgrade is: how much disk/CPU increase it uses while it runs, and how long the reorg typically takes. I've asked the same question of NetApp support, but I was wondering if anyone here has some personal experience. Thanks! Davin. -- Davin Milun E-mail: milun(a)cse.buffalo.edu

1 0

Re: Does anyone have experience with SQL 2000 on NetApp?
by lallin＠millermartin.com 01 Aug '03

01 Aug '03

We currently have several SQL 2000 Servers accessing databases and logs on an F720 via CIFS. It works very well. We've not used the VLD option but do plan to implement it for Exchange by the end of the year. We'll probably use CIFS for as long as MS supports it for our SQL databases. As far as performance goes, we saw a small performance hit with our SQL databases primarily because of the way that our volume is layed out. We have a single 12 spindle volume that is shared with 3 SQL Servers, 3 Notes Servers, and user homes. As you can see this is not ideal, but in this configuration, our SQL Servers still perform remarkably well. By the way, we are going to separate our volumes eventually so that SQL has it's own set of disks. My recommendation would be to set your filer up with it's own SQL volume if at all possible. Feel free to contact me if you have any further quesitons. ----------------------------------------------- Luther L. Allin IV, MCSE, ICSA Network Systems Engineer Miller & Martin LLP 832 Georgia Avenue, Suite 1000 Chattanooga, TN 37402 lallin(a)millermartin.com http://www.millermartin.com/ Phone: 423-785-8381 Fax: 423-321-1678 ----------------------------------------------- Steven Keene <SKeene(a)creativesolutions.com> on 08/01/2003 08:30:15 AM To: toasters(a)mathworks.com cc: (bcc: Luther Allin/M&M) Subject: Does anyone have experience with SQL 2000 on NetApp? Hi, just wondering if anyone has had experience with either Windows 2003 and/or SQL 2000 on NetApp running with VLD. I am new to NetApp and being soon to install one, was wondering about different volume sizes and performance with SQL databases. Any input would be appreciated. Thanks, Steve

1 0

Does anyone have experience with SQL 2000 on NetApp?
by Steven Keene 01 Aug '03

01 Aug '03

Hi, just wondering if anyone has had experience with either Windows 2003 and/or SQL 2000 on NetApp running with VLD. I am new to NetApp and being soon to install one, was wondering about different volume sizes and performance with SQL databases. Any input would be appreciated. Thanks, Steve

1 0

SNMP and VIFS
by paul.winchcombe＠ukgateway.net 01 Aug '03

01 Aug '03

Hi all, This is my first posting so apologies if I get syntax wrong. I have a 940c cluster and have setup 3 network card in a multi VIF and then a Single VIF. When I unplug a cable from the config I get a message on the console e11a down but the SNMP message sent to the Management Station was TRAP 4. The mib has been loaded and traps for machine being rebooted and Volume full are decoded correctly. What am i doing wrong ? Regards Paul

1 0

where to purchase replacement parts
by Dan Finn 31 Jul '03

31 Jul '03

Aside from Netapp themselves and ebay does anyone have any vendors they can recommend to purchase new replacement parts for my F740 and F760. All I really need is disks. Thanks Dan

4 3

**Half price tobacco**
by Tobacco Store 31 Jul '03

31 Jul '03

1 0

Testing, testing
by Chris Thompson 31 Jul '03

31 Jul '03

There's something mighty strange going on at mathworks.com: although I can follow up to existing threads, three separate attempts to post a new one to toasters(a)mathworks.com in the past few days have caused absolutely nothing to appear. Please excuse this attempt to determine whether it is some aspect of the content, subject, etc. that is causing them to disappear into a black hole. Chris Thompson Email: cet1(a)cam.ac.uk

3 3

command to tell you what kind of shelves you have
by Dan Finn 30 Jul '03

30 Jul '03

Is there a command that will output what type of shelves are attached to a netapp. The closes I was able to come was "environment status shelf" but that doesn't tell me whether they are FC7, FC8 or FC9 shelves. Thanks Dan

2 1

Is there any built in utility for file compression
by Dan Finn 30 Jul '03

30 Jul '03

I don't think there is but I am just wondering if there is any built in utilities in the Netapps to do on the fly file compression as they are being written to the file system? Thanks Dan

1 0

BEA Weblogics
by Robert Borowicz 30 Jul '03

30 Jul '03

Are there any users out there using BEA Weblogics App servers out there that may be mounting the "projects" area from filers? BEA moves files around from the Admin Server to Managed Servers which may be on separate machines via its "deploy command. I'm vying to mount the domain dir on the Admin host and also make that a share to the W2K "build box". When our build guy goes to deploy apps his Ant scripts need to simply copy the .ear's and .war's to a "drop dir" which is also on the Admin host. From there we do the Weblogics "deploy" which does a number of things fundamentally which is moving the .ear files out of the drop dir and into the deploy app dirs. Anybody doing this? Thanks -Rob

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters