toasters

toasters@lists.teaparty.net

13520 discussions

RE: Windows folder redirection and cifs.homedir
by Michel GELDENHUYS 26 Aug '03

26 Aug '03

I'm not sure to understand your problem, but since you use CIFS.HOMEDIR mechanism, why don't you set an home directory for each user in the Active Directory, and then use Group policy feature to redirect my Documents to the home dir ??? Michel Geldenhuys Danone SA/NV +32 2 776 68 23 michel.geldenhuys(a)danone.com "Colin Eric Johnson" <colinj(a)ccs.neu.edu> Sent by: owner-toasters(a)mathworks.com 26/08/2003 18:20 To: <toasters(a)mathworks.com> cc: Subject: RE: Windows folder redirection and cifs.homedir Not to belabor the point but here's what is confusing me, the eventlog on the client computer reports the following: ------------------------------------- Event Type: Error Event Source: Folder Redirection Event Category: None Event ID: 106 Date: 8/26/2003 Time: 11:32:25 AM User: CCIS-WINDOWS\colinj Computer: GALLIUM Description: Failed to perform redirection of folder My Documents. The full source path was <C:\Documents and Settings\colinj\My Documents>. The full destination path was <\\ccis-windows\net\myhome>. At least one of the shares on which these paths lie is currently offline. ------------------------------------ Now it looks to me like the redirection is happening as the user. So the question is now, why is the share from the network appliance not showing up? -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Michel Geldenhuys Sent: Monday, August 25, 2003 7:05 PM To: toasters(a)mathworks.com Subject: RE: Windows folder redirection and cifs.homedir Hi Eric, A particular CIFS homedirs is only visible if you're logged on as the user whose login is matching the foldername. I've got a similar issue when configuring the home directory in the user manager in our NT 4.0 domain. As I'm not logged on as the user, I can't see his homedir. However, have a look at this, maybe it might help you: http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodt echnol/windowsserver2003/proddocs/datacenter/gpx_redirectHomeADV.asp Kind regards, Michel Geldenhuys Danone Belgium SA/NV

3 2

RE: FAS250 fibre tape controller --- copper to optical converter
by Timothy Naple 26 Aug '03

26 Aug '03

Mike, I was just notified by a system engineer at NetApp that these converters will not work. The NetApp X6512A converter (same as the the Stratos) requires a powered copper fibre channel connection. The copper fibre channel port for tape on the FAS250 is not powered so these converters will not work. Sorry for the wrong information. I will let you know if I can come up with a solution. Thank you, Tim Timothy Naple tnaple(a)berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com -----Original Message----- From: Timothy Naple Sent: Monday, August 25, 2003 7:57 PM To: 'Mike Ball' Cc: 'Toasters (toasters(a)mathworks.com)'; Berkcom Support Subject: RE: FAS250 fibre tape controller --- copper to optical converter Mike, By the way, NetApp also sells the X6512A Media Interface Adapter. It was originally intended for filers with optical FCAL controllers and copper based FC9's & DS14's, but it should also work for your application. Thanks, Tim Timothy Naple tnaple(a)berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com -----Original Message----- From: Timothy Naple Sent: Monday, August 25, 2003 7:36 PM To: 'Mike Ball' Cc: Toasters (toasters(a)mathworks.com) Subject: RE: FAS250 fibre tape controller --- copper to optical converter Mike, Take a look at Stratos Lightwave. We use their converters all the time for various copper-optical fibre channel applications. Here is one of the products we use often (Copper DB-9 to Optical SC converter): http://www.stratoslightwave.com/shop/searchstore.asp?categories=1&dd1=60&dd2 =86 I have a bunch of these in our test lab. I'd be happy to let you borrow one to test with. Thanks, Tim Timothy Naple tnaple(a)berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com -----Original Message----- From: Mike Ball [mailto:MBall@datalink.com] Sent: Monday, August 25, 2003 1:20 PM To: Toasters (toasters(a)mathworks.com) Subject: FAS250 fibre tape controller --- copper to optical converter Does anyone know of a unsupported/supported copper to optical converter for the FAS250 copper fibre tape port? Our fibre switches do not support cooper Gbic's, and the LTO tape drives we have only support optical fibre connections (point to point).

1 0

poor performance on a filer
by Geoff Hardin 26 Aug '03

26 Aug '03

We have an F760C that seems to have recently run into a wall in regards to performance. As you can see, there total NFS ops (its purely NFS over UDP) are tiny for what this class of filer can handle, the net in/out isn't especially high, the disks are doing about half of what they can, but you can see the CPU is pegged and the Consistency Point type is B (back to back CPs), which I seem to remember was very bad. filer> version NetApp Release 6.1R1P1: Wed Jun 20 18:24:25 PDT 2001 filer> sysstat -u 1 CPU Total Net kB/s Disk kB/s Tape kB/s Cache Cache CP CP Disk ops/s in out read write read write age hit time ty util 100% 12 1777 10 0 0 0 0 7 100% 100% : 0% 100% 23 431 7 2094 4955 0 0 7 100% 100% : 48% 100% 2 499 7 359 865 0 0 7 100% 100% : 15% 100% 6 551 5 0 0 0 0 7 100% 100% : 0% 100% 16 665 7 40 16 0 0 7 100% 100% : 2% 100% 139 1746 13 16 0 0 0 7 100% 100% : 2% 100% 95 461 26 1840 1892 0 0 7 100% 100% B 41% 100% 321 3505 32 636 1152 0 0 7 99% 100% : 21% 100% 274 5380 63 810 1772 0 0 7 100% 100% : 31% 100% 200 1313 39 2732 5893 0 0 7 98% 100% : 44% 100% 361 590 47 3750 5205 0 0 7 100% 100% B 58% 100% 315 7011 173 6491 10557 0 0 7 100% 100% B 51% 100% 483 6314 144 4125 10239 0 0 7 99% 100% : 57% 100% 429 3544 179 4453 7540 0 0 7 100% 100% B 40% 100% 422 6462 138 3351 4313 0 0 7 100% 100% B 40% 100% 504 7227 143 3866 7226 0 0 7 100% 100% B 49% 100% 509 6933 164 3285 8902 0 0 7 100% 100% B 47% 100% 397 6853 161 3511 8631 0 0 7 100% 100% B 41% 100% 342 4527 202 3123 8722 0 0 7 99% 100% B 38% CPU Total Net kB/s Disk kB/s Tape kB/s Cache Cache CP CP Disk ops/s in out read write read write age hit time ty util 100% 450 5346 198 2145 9383 0 0 7 98% 100% : 41% 100% 537 5397 196 2589 4091 0 0 7 99% 100% B 43% 100% 355 7152 376 5053 5944 0 0 7 98% 100% B 47% 100% 390 6693 381 3788 8575 0 0 7 98% 100% B 63% 100% 462 5748 212 2755 8926 0 0 7 98% 100% B 41% 100% 390 5289 206 2936 8896 0 0 7 99% 100% B 40% 100% 408 6120 217 4313 10208 0 0 8 98% 100% : 40% 100% 420 5651 165 3499 5997 0 0 8 99% 100% B 38% 100% 497 7152 1911 4138 3987 0 0 8 100% 100% B 33% 100% 177 6577 647 4195 8403 0 0 8 99% 100% B 61% 100% 491 5549 192 4023 9042 0 0 8 99% 100% B 52% 100% 483 4760 246 2192 9256 0 0 8 98% 100% : 54% 100% 454 6273 282 2125 9104 0 0 8 100% 100% B 43% 100% 419 6278 624 1977 6597 0 0 8 100% 100% B 36% 100% 437 7082 148 2293 4436 0 0 8 100% 100% B 44% 98% 533 6814 166 1964 9181 0 0 8 96% 100% B 45% 100% 451 7486 399 2396 7076 0 0 8 99% 100% B 47% 100% 361 4137 126 36 64 0 0 8 100% 100% : 4% 100% 164 5411 63 32 0 0 0 8 99% 100% : 2% 100% 135 1293 25 40 16 0 0 8 100% 100% : 3% CPU Total Net kB/s Disk kB/s Tape kB/s Cache Cache CP CP Disk ops/s in out read write read write age hit time ty util 100% 113 693 29 242 5297 0 0 8 99% 100% : 17% 88% 100 557 28 1740 5399 0 0 8 93% 100% : 48% 92% 363 2982 66 5628 9746 0 0 8 100% 100% B 42% 69% 245 6641 94 4992 4999 0 0 8 99% 100% B 50% 80% 256 8562 98 6633 11136 0 0 8 98% 100% B 52% 96% 316 5253 97 3594 9801 0 0 8 100% 100% : 54% 80% 484 4006 89 3123 5641 0 0 8 100% 100% F 46% 79% 303 8004 142 7064 8163 0 0 8 99% 100% F 59% 86% 452 7324 124 7658 10672 0 0 8 92% 100% F 75% 96% 487 3194 250 5769 10395 0 0 8 99% 100% : 58% 87% 564 7267 145 5295 7299 0 0 8 95% 100% F 53% 53% 114 8385 108 6838 4198 0 0 8 98% 100% B 36% 97% 520 3170 38 7972 10447 0 0 8 99% 100% : 62% 78% 755 5875 2667 2913 3823 0 0 8 100% 100% B 50% 83% 304 8232 129 7845 8444 0 0 8 99% 100% B 60% 88% 607 7104 101 7272 10302 0 0 8 99% 100% B 65% 91% 478 4897 148 5553 11166 0 0 8 99% 100% : 61% 89% 424 5359 124 5303 6008 0 0 8 99% 100% B 53% 82% 360 8128 110 6587 6664 0 0 8 99% 100% B 64% There are four DLT7000 tape drives connected to the filer, and there is one backup session going to the filer at this time; for some reason, the filer does not report when writing data from a Solaris client using the attached tape drive (we're using QuickRestore 2.7.9 if that makes any difference). I'm tempted to say that it's just a problem with not enough NVRAM on the filer (F760 has 32 MB of NVRAM, and I think it gets split when you're talking about a cluster). Does anyone else have any ideas or suggestions? Geoff Hardin UNIX System Administrator

1 0

Windows folder redirection and cifs.homedir
by Colin Eric Johnson 26 Aug '03

26 Aug '03

When I attempt, via group policy, to redirect a users "My Documents" folder to their home directory on the filer using the CIFS.HOMEDIR variable I get the following error logged on the windows client: Failed to perform redirection of folder My Documents. The full source path was <C:\Documents and Settings\colinj\My Documents>. The full destination path was <\\ccis-windows\net\myhome>. At least one of the shares on which these paths lie is currently offline. It's not clear to me why it isn't finding the users home directory and unable to mount it. Is this a known problem? Can it be made to work? I did find one other reference to this in the mailing list archive but there was no posted resolution. Colin Eric Johnson Microcomputer Network Administrator College of Computer and Information Science Northeastern University

2 3

DC address discovery
by Moshe Linzer 26 Aug '03

26 Aug '03

I am getting messages every 4 hours that the filer is searching for new Domain Controllers: Tue Aug 26 18:04:23 IDT [Auth04:info]: Starting DC address discovery for NSTA-NT. Tue Aug 26 18:04:23 IDT [Auth04:info]: Starting WINS queries. Tue Aug 26 18:04:23 IDT [Auth04:info]: Found 3 BDC addresses through WINS. Tue Aug 26 18:04:23 IDT [Auth04:info]: Found 1 PDC addresses through WINS. Tue Aug 26 18:04:23 IDT [Auth04:info]: DC address discovery for NSTA-NT complete. 2 unique addresses found. I tried setting prefdc in the cifs command, but this does not help. CIFS is working fine, I just want to eliminate these checks, or at least relegate them to once a day at 2am if possible! You might ask why bother? Well, once I saw that at the time of this check the filer "hiccupped" and I lost some CIFS sessions. So I would like to eliminate it if possible. Thanks for your help, Moshe -- ----------------------------------------------------------------------------- Moshe Linzer | On the Internet, IT Manager | National Semiconductor, Israel | nobody knows you're a moron. Phone: 972-9-970-2247 | Fax: 972-9-970-2001 | - Network Magazine Email: Moshe.Linzer(a)nsc.com | -----------------------------------------------------------------------------

1 0

RE: GREETINGS
by taylorfred＠tiscali.co.uk 26 Aug '03

26 Aug '03

Dear Friend, Greetings, how are you, business and family. I hope all is well with you. I know you might wonder how I got to know your name and email address. I got it from the Presidential Library. My name is Fredrick Taylor, the junior brother to President Charles Taylor of the Country Liberia. Please I humbly beg you from the bottom of my heart to treat this confidential letter very secret. The rebel forces and the intense pressure from United States, United Nation, International Community and West Africa Peace Keeping force ?Ecomog? had finally toppled my brother government and now he is on exile with his immediate family but I am still behind. Please listen to me very carefully. Under my custody are boxes containing $25m. If the new government in place sees or discovers the fund they will take the money and plunder it. I have secretly hidden the boxes containing the fund and I will move the boxes of fund to you for safe keeping to any address of your choice through Diplomatic Courier Service or a reputable security company tagged Diplomatic Luggage with your name as the beneficiary. Furthermore, when the boxes get to you in 7 days, you notify me immediately so that I will come to your country to divide the fund. It shall be divided 60% for me and 40% for you period. My own share will be used for investment in your country. If you agree and to be an honest person for this transaction, reply me through this email address. It is very urgent. Best Regards, Frederick Taylor

1 0

RE: FAS250 fibre tape controller --- copper to optical converter
by Timothy Naple 26 Aug '03

26 Aug '03

Mike, By the way, NetApp also sells the X6512A Media Interface Adapter. It was originally intended for filers with optical FCAL controllers and copper based FC9's & DS14's, but it should also work for your application. Thanks, Tim Timothy Naple tnaple(a)berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com -----Original Message----- From: Timothy Naple Sent: Monday, August 25, 2003 7:36 PM To: 'Mike Ball' Cc: Toasters (toasters(a)mathworks.com) Subject: RE: FAS250 fibre tape controller --- copper to optical converter Mike, Take a look at Stratos Lightwave. We use their converters all the time for various copper-optical fibre channel applications. Here is one of the products we use often (Copper DB-9 to Optical SC converter): http://www.stratoslightwave.com/shop/searchstore.asp?categories=1&dd1=60&dd2 =86 I have a bunch of these in our test lab. I'd be happy to let you borrow one to test with. Thanks, Tim Timothy Naple tnaple(a)berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com -----Original Message----- From: Mike Ball [mailto:MBall@datalink.com] Sent: Monday, August 25, 2003 1:20 PM To: Toasters (toasters(a)mathworks.com) Subject: FAS250 fibre tape controller --- copper to optical converter Does anyone know of a unsupported/supported copper to optical converter for the FAS250 copper fibre tape port? Our fibre switches do not support cooper Gbic's, and the LTO tape drives we have only support optical fibre connections (point to point).

1 0

RE: FAS250 fibre tape controller --- copper to optical converter
by Timothy Naple 26 Aug '03

26 Aug '03

Mike, Take a look at Stratos Lightwave. We use their converters all the time for various copper-optical fibre channel applications. Here is one of the products we use often (Copper DB-9 to Optical SC converter): http://www.stratoslightwave.com/shop/searchstore.asp?categories=1&dd1=60&dd2 =86 I have a bunch of these in our test lab. I'd be happy to let you borrow one to test with. Thanks, Tim Timothy Naple tnaple(a)berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com -----Original Message----- From: Mike Ball [mailto:MBall@datalink.com] Sent: Monday, August 25, 2003 1:20 PM To: Toasters (toasters(a)mathworks.com) Subject: FAS250 fibre tape controller --- copper to optical converter Does anyone know of a unsupported/supported copper to optical converter for the FAS250 copper fibre tape port? Our fibre switches do not support cooper Gbic's, and the LTO tape drives we have only support optical fibre connections (point to point).

1 0

FAS250 fibre tape controller --- copper to optical converter
by Mike Ball 25 Aug '03

25 Aug '03

Does anyone know of a unsupported/supported copper to optical converter for the FAS250 copper fibre tape port? Our fibre switches do not support cooper Gbic's, and the LTO tape drives we have only support optical fibre connections (point to point).

1 0

RE: Ontap Choice for DS-14 MK2
by Bui, Marcus 25 Aug '03

25 Aug '03

You need 6.4.1. I had to upgrade to 6.4.1 before adding the new DS14 on F880c recently. thanks, Marcus Bui -----Original Message----- From: devnull(a)adc.idt.com [mailto:devnull@adc.idt.com] Sent: Monday, August 25, 2003 1:51 PM To: NetApp Toasters List Subject: Ontap Choice for DS-14 MK2 Dear All, I have a F810 running 6.1.2R3 with a DS-14 shelf. I plan to add another DS-14 shelf to it and was shipped the DS-14 MK2 instead of the "old" DS-14 shelf. Since the MK2's have the new ESM connectors, which i cant use to connect to my old DS-14, i was also shipped out the old style connectors and have swapped out the fiber connectors. I gather that i need atleast 6.1.3 on my F810 to work with the MK-2 shelf. I just wanted to poll the list for recommendations Data Ontap versions and other gotchas that i should be aware of. Many Thanks, /dev/null devnull(a)adc.idt.com

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters