toasters

toasters@lists.teaparty.net

13514 discussions

RE: F760 fails to pass POST, bad DIMM
by DFinn＠studentadvantage.com 04 Nov '03

04 Nov '03

Is it ok to use different size DIMMs? Would it be ok to take 2 128MB ones from my F740 and use them in this F760? Thanks for all the assistance Dan -----Original Message----- From: McCarthy, Tim [mailto:timothy.mccarthy@netapp.com] Sent: Tuesday, November 04, 2003 6:50 AM To: DFinn(a)studentadvantage.com Subject: RE: F760 fails to pass POST, bad DIMM As was mentioned, the J30 DIMM is marked on the motherboard. Try reseating the memory module and see if you get past it. If not, remove the memory module. Realize: you are running with half of your memory as the system uses the modules in pairs...removing one effectively removes two. If you have a large capacity system, you may run into problems as well.... --tmac -----Original Message----- From: DFinn(a)studentadvantage.com [mailto:DFinn@studentadvantage.com] Sent: Tuesday, November 04, 2003 1:33 AM To: toasters(a)mathworks.com Subject: F760 fails to pass POST, bad DIMM here's the error on bootup: Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 1024 MB Testing SIO Testing LCD Probing devices Testing 1024MB Clearing ECC Stuck-at:283MB,3 Replace DIMM J30 Startup aborted Unfortunately I do not currently have support from Netapp for this filer so I need to find a short term solution to my problem. The error above points out the bad dimm that needs replacement. 1. Can I just remove the bad dimm and run with less memory temporarily? 2. I have a spare F740 that I can rob parts from, can I take a DIMM from there and replace the bad one in this F760? 3. How do I locate DIMM J30? any and all help is really apprecaited. Thanks Dan

1 0

fund transfer
by elekecr 04 Nov '03

04 Nov '03

Dear Sir, My name is William Ume, Presently, I am working in an African country. I got your contact via an online network and felt you may be willing to pursue this with me. This proposal may sound strange to you or probably you may even think it is a joke, because of lots of funny mails circulating over the Internet. Well if you do, I really understand, but honestly my friend, I am really handicaped, because this is the only means available to me to communicate to you. Honestly, I think you should give me a trial, I need your assistance and the deal is good. The deal involves the transfer of funds, safely abroad. For your role, you are to receive a percentage of the funds, based on a sharing formula that will be agreed by both parties. If you are interested in pursuing this further please contact me via e-mail so that I can furnish you with the relevant details about the origin of the fund and the modalities for the deal. Please send your response to my private e-mail williamume(a)indiatimes.com William.

1 0

HTTP on Filers
by markallen＠micron.com 04 Nov '03

04 Nov '03

I'm thinking about testing HTTP on my test filer and was wondering if anyone had any comments on this product. Good or bad. I don't have any experience with running http on filers. Thanks -Mark

2 1

RE: F760 fails to pass POST, bad DIMM
by Alan McLachlan 04 Nov '03

04 Nov '03

> here's the error on bootup: . . . > Stuck-at:283MB,3 > Replace DIMM J30 > Startup aborted > Unfortunately I do not currently have support from Netapp for this filer so > I need to find a short term solution to my problem. The error above points > out the bad dimm that needs replacement. > 1. Can I just remove the bad dimm and run with less memory temporarily? Yes, although you will probably notice a performance hit. Also, they work in pairs so you will drop from 1GB straight to 512MB even if you leave it's parner in. > 2. I have a spare F740 that I can rob parts from, can I take a DIMM from > there and replace the bad one in this F760? They are different sizes (740 is 4 x 128, 760 is 4 x 256). Also, they work in pairs. You might yield 768MB, or the system might complain. I haven't tried this - sorry :o) > 3. How do I locate DIMM J30? The DIMM slots are marked on the mainboard. **** ASI Solutions Disclaimer **** The material transmitted may contain confidential and/or privileged material and is intended only for the addressee. If you receive this in error, please notify the sender and destroy any copies of the material immediately. ASI will protect your Privacy according to the 10 Privacy Principles outlined under the new Privacy Act, Dec 2001. This email is also subject to copyright. Any use of or reliance upon this material by persons or entities other than the addressee is prohibited. E-mails may be interfered with, may contain computer viruses or other defects. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments. **** END OF MESSAGE ****

1 0

F760 fails to pass POST, bad DIMM
by DFinn＠studentadvantage.com 04 Nov '03

04 Nov '03

here's the error on bootup: Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 1024 MB Testing SIO Testing LCD Probing devices Testing 1024MB Clearing ECC Stuck-at:283MB,3 Replace DIMM J30 Startup aborted Unfortunately I do not currently have support from Netapp for this filer so I need to find a short term solution to my problem. The error above points out the bad dimm that needs replacement. 1. Can I just remove the bad dimm and run with less memory temporarily? 2. I have a spare F740 that I can rob parts from, can I take a DIMM from there and replace the bad one in this F760? 3. How do I locate DIMM J30? any and all help is really apprecaited. Thanks Dan

1 0

Single-thread NFS performance
by atticus＠satanic.org 03 Nov '03

03 Nov '03

Does anyone have ballpark numbers to share w/ single-thread nfs performance? Going from a 4500 running solaris 2.8 to a 760 and I'm capping out around 22mbit/s for single copies -- this hold pretty consistent w/ tcp and udp mounts (both w/ rsize=32768). This is across a WAN, but RTT is only ~16ms. Running multiple parallel copies will bump throughput to ~80mb/s.. Is this about right, or are there magic knobs I'm missing? Thanks.

2 3

From the Desk of Atta Ezere.
by dattezereu2＠netzero.com 01 Nov '03

01 Nov '03

Sir/Madam, I want to transfer to overseas (US$35.5m} from a Bank in Africa,I am seeking a reliable and honest person who will be capable and willing to do this transaction with me promise that he/her will never let me down in future or you help to seek an honest and reliable businessman who can assist us. I am Mr Atta Ezere, the Auditor General of a bank in Africa,,during the course of our auditing I discovered a floating fund in a domiciliary account opened in the 1990 and since 1993 nobody has operated on this account, after going through some old files in the record I discovered that the owner of the account who is a foreigner died without any traceable next of kin hence the dormant nature of the account and if i do remit this money out urgently it will be re-channeled into the bank's reserve. I am only contacting you as a foreigner because this money can only be approved to a foreigner or into foregner account.I need your full co- operation to make this work fine as i will use my office to see that the transaction is hitch free and On the conclusion of this business ,you will be given 25%of the total amount ,70%will be for me ,while 5% will be for expenses both parties might have incured during the process of this transaction. Please send your private telephone numbers as a need may arise either to call you in the day or night as occasion warrants. I look forward to your earliest reply through my private email address:ezereatta@yahoo.co.uk Regards, Atta Ezere. {Auditor General} ________________________________________________________________ The best thing to hit the internet in years - NetZero HiSpeed! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month -visit www.netzero.com to sign up today!

1 0

RE: SNMP values keeps changing after every reboot. any solution to fix this?
by Hackworth, Brian 31 Oct '03

31 Oct '03

Almost. DataFabric Manager uses the file system name as its key, rather than the SNMP OID index. I'm not aware of any way to trick MRTG into doing it that way. - Brian Hackworth When asked how Data Fabric Manager can handle this, the answer was that since it relies on a database, DFM is clever enough to update the index to check.

2 1

Re: SNMP values keeps changing after every reboot. any solution to fix this?
by Michel GELDENHUYS 31 Oct '03

31 Oct '03

Hi StoRage, I discussed this few weeks ago with a NetApp engineer. Unfortunately, this is a "by-design" behaviour: MIB values are loaded during boot and in a random fashion so there is no way to forecast (or enforce) what MIB index will be for a particular volume. So it seems that there is no other way than manually modifying MRTG configuration file to take the changes into account. When asked how Data Fabric Manager can handle this, the answer was that since it relies on a database, DFM is clever enough to update the index to check. I hope this will help. Kind regards, Michel Geldenhuys Danone Belgium SA/NV +32 2 776 68 23 michel.geldenhuys(a)danone.com Sto Rage© <Net_Backer(a)hotmail.com> Sent by: owner-toasters(a)mathworks.com 10/31/2003 03:42 AM To: <toasters(a)mathworks.com> cc: Subject: SNMP values keeps changing after every reboot. any solution to fix this? Every time the filer is rebooted. the snmp values for disk changes. This affects our mrtg monitoring. Is there a script that helps overcome this issue? How are others monitoring disk usage using mrtg? TIA After last reboot: NETWORK-APPLIANCE-MIB::dfFileSys.1 = STRING: "/vol/vol1/" NETWORK-APPLIANCE-MIB::dfFileSys.2 = STRING: "/vol/vol1/.snapshot" NETWORK-APPLIANCE-MIB::dfFileSys.3 = STRING: "/vol/vol7/" NETWORK-APPLIANCE-MIB::dfFileSys.4 = STRING: "/vol/vol7/.snapshot" NETWORK-APPLIANCE-MIB::dfFileSys.5 = STRING: "/vol/vol6/" NETWORK-APPLIANCE-MIB::dfFileSys.6 = STRING: "/vol/vol6/.snapshot" NETWORK-APPLIANCE-MIB::dfFileSys.7 = STRING: "/vol/vol2/" NETWORK-APPLIANCE-MIB::dfFileSys.8 = STRING: "/vol/vol2/.snapshot" NETWORK-APPLIANCE-MIB::dfFileSys.9 = STRING: "/vol/vol0/" NETWORK-APPLIANCE-MIB::dfFileSys.10 = STRING: "/vol/vol0/.snapshot" NETWORK-APPLIANCE-MIB::dfFileSys.11 = STRING: "/vol/vol5/" NETWORK-APPLIANCE-MIB::dfFileSys.12 = STRING: "/vol/vol5/.snapshot" NETWORK-APPLIANCE-MIB::dfFileSys.13 = STRING: "/vol/vol4/" NETWORK-APPLIANCE-MIB::dfFileSys.14 = STRING: "/vol/vol4/.snapshot" NETWORK-APPLIANCE-MIB::dfFileSys.15 = STRING: "/vol/vol3/" NETWORK-APPLIANCE-MIB::dfFileSys.16 = STRING: "/vol/vol3/.snapshot" Before the reboot: #NETWORK-APPLIANCE-MIB::dfFileSys.1 = STRING: "/vol/vol2/" #NETWORK-APPLIANCE-MIB::dfFileSys.2 = STRING: "/vol/vol2/.snapshot" #NETWORK-APPLIANCE-MIB::dfFileSys.3 = STRING: "/vol/vol1/" #NETWORK-APPLIANCE-MIB::dfFileSys.4 = STRING: "/vol/vol1/.snapshot" #NETWORK-APPLIANCE-MIB::dfFileSys.5 = STRING: "/vol/vol4/" #NETWORK-APPLIANCE-MIB::dfFileSys.6 = STRING: "/vol/vol4/.snapshot" #NETWORK-APPLIANCE-MIB::dfFileSys.7 = STRING: "/vol/vol6/" #NETWORK-APPLIANCE-MIB::dfFileSys.8 = STRING: "/vol/vol6/.snapshot" #NETWORK-APPLIANCE-MIB::dfFileSys.9 = STRING: "/vol/vol0/" #NETWORK-APPLIANCE-MIB::dfFileSys.10 = STRING: "/vol/vol0/.snapshot" #NETWORK-APPLIANCE-MIB::dfFileSys.11 = STRING: "/vol/vol5/" #NETWORK-APPLIANCE-MIB::dfFileSys.12 = STRING: "/vol/vol5/.snapshot" #NETWORK-APPLIANCE-MIB::dfFileSys.13 = STRING: "/vol/vol3/" #NETWORK-APPLIANCE-MIB::dfFileSys.14 = STRING: "/vol/vol3/.snapshot" #NETWORK-APPLIANCE-MIB::dfFileSys.15 = STRING: "/vol/vol7/" #NETWORK-APPLIANCE-MIB::dfFileSys.16 = STRING: "/vol/vol7/.snapshot"

3 2

scsi timeouts
by Bui, Marcus 31 Oct '03

31 Oct '03

I have an F820, 6.4.2P6, with dual port FC card that's getting a lot of scsi timeout msgs on the 7b port. The scsi timeouts spans all disk shelves on the 7b loop. All other loop is fine. These started when I moved the 18GB FC9 shelves from a F880c to the F820. Working the tech support, I replaced a couple of the LRC, replaced two shelf cable interconect, recheck all the cables, replaced FC card slot 7, remove/reinsert all the drives, and ran fcal check which passed all fcal tests. The core file result indicated to bug #98110 but upgraded to v6.4.2P6 did not resolve these error msgs. The filer panic a few times before running v6.4.1 that's why tech support recommends upgraded to v6.4.2P6. Right now I disconnected the second loop 7b. Any ideas? Slot: 7b Description: Fibre Channel Host Adapter 7b (Dual-channel, QLogic 2200A rev. 5) Firmware Rev: 2.1.32 PCI Bus Width: 64-bit PCI Clock Speed: 33 MHz Error Msg:------------------------------------------------------------------------ ------------------------------- Sun Oct 26 09:05:30 CST [scsi.cmd.retrySuccess:info]: Device 7b.20: request successful after retry #1: cdb 0x2f:00182000:0400. Sun Oct 26 09:05:59 CST [ispfc_timeout_4:warning]: 7b.27 (0x0400001b) (0x039a7320,0x2f:00196800:0400,0/0,1157/264/0,19642/0): command timeout, quiescing drive to allow outstanding I/O to complete. ---------------------------------------------------------------------------- ------------------------------------------- thanks, Marcus Bui

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters