toasters

toasters@lists.teaparty.net

1 participants
13523 discussions

exportfs on NetApp Release 6.4.2P6
by George Kahler 06 Jan '04

06 Jan '04

Hi, I just upgraded from 6.2.2 to 6.4.2P6 and noticed that after creating a new qtree to be exported to a database client the 'exportfs -va' command produces a different behavior. It appears that it unexports and then does a re-export. Before, on 6.2.2, it just did a re-export. Needles to say doing an unexport on a live mounted filesystem is not to nice. Has anyone seen this as well ? unexported /vol/auto2/its-adsprod759 re-exported /vol/auto2/its-adsprod759 unexported /vol/auto2/its-adsqa759 re-exported /vol/auto2/its-adsqa759 unexported /vol/auto2/its-hrtrn83 re-exported /vol/auto2/its-hrtrn83 unexported /vol/no2/cns-pbat-rec2 re-exported /vol/no2/cns-pbat-rec2 unexported /vol/no2/cns-pceo-rec2 re-exported /vol/no2/cns-pceo-rec2 unexported /vol/no2/cns-pdev-rec2 re-exported /vol/no2/cns-pdev-rec2 unexported /vol/no2/cns-pitsm-rec2 unexported /vol/dqa1/cns-test-dbf re-exported /vol/dqa1/cns-test-dbf unexported /vol/dqa1/its-ADSQA-dbf re-exported /vol/dqa1/its-ADSQA-dbf unexported /vol/dqa1/its-FIN70AU-dbf re-exported /vol/dqa1/its-FIN70AU-dbf Thanks, George ------------------------------------------------------------------------------- George Kahler e-mail: george(a)yorku.ca Sr. Systems Administrator humans: (416) 736-2100 x.22699 Computing and Network Services machines: (416) 736-5830 Ontario, Canada, M3J-1P3

2 4

Good day
by Dipreye John Wilcox 06 Jan '04

06 Jan '04

Dear Sir/Madam I am John Wilcox the vault officer of a financial firm, I am writing this letter to solicit for support and assistance from you to carry out a business of mutual benefit and concern. I know you would be wondering why I am writing you with a request such as these but I only urge you to read on. Pending in our vault is a numbered time fixed deposit of belonging to Mr Robert Chapman Valued presently at $4.34 Million dollars, Mr. Chapman lost his life in a fire disaster in his personal home. His time deposit has been re-run twice and inline with the contractual agreement entered with him, we cannot re-run it again, efforts has since been exhaustively made to source out his kin but to no avail. Information reached me that the firm wants to return the account as dormant thereby paving way for the fund to be remitted into the governments confine for arms purchase, at this juncture I had to stampede that possibility by writing to fraustrate all efforts for the government to seize the funds, hence I am asking you to stand in as the next of Kin to Mr. Chapman and the funds shall be transmitted to you, we shall share the funds in the ratio of 50-40, while 10% will be for unprecedented expenses incurred by both parties in the course of this transfer. If you accept to help me in this transaction kindly send your response via email, I anticipate to have a wonderful working relationship with you. Respectfully, John D. Wilcox _______________________________________________________________________ Brought to you by i2828.com :: The best interactive online community

1 0

pcnfs
by Jerry 05 Jan '04

05 Jan '04

Does anyone use the pcnfs option on the filer. I am looking into using this with the windows services for unix that has recently popped up and was wondering if it is reliable. CIFS is not an option for various reasons I won't go into. __________________________________ Do you Yahoo!? Find out what made the Top Yahoo! Searches of 2003 http://search.yahoo.com/top2003

2 1

HAPPY NEW YEAR TO YOU
by OJI 03 Jan '04

03 Jan '04

SHAMAILA KHAN wish you a VERYVERY happy new year If you like to hear what she says, clik here: www.shamailakhan.com FROM oji (Staff member) info(a)marketing4bussiness.com

1 0

hiya
by netapp newbie 30 Dec '03

30 Dec '03

I just got this thing. netapp 630. when I try to access it. it says, \\hostname_of_the_netapp is not accessible the account us not authorized to log in from this station. =\ can you help? Netapp Newbie. __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/

1 0

RE: Boot menu problem on F760
by Matti Ryymin 30 Dec '03

30 Dec '03

Hi, At the OK prompt type setenv floppy-boot? false That should do it. -Matti- -----Original Message----- From: Matthew Zito [mailto:mzito@gridapp.com] Sent: 29. joulukuuta 2003 19:23 To: toasters(a)mathworks.com Subject: Boot menu problem on F760 Hi, We have a new F760 we just got here - powered it on, booted 6.4.2 from floppy and then used the normal install program to install 6.4.3 over NFS. Everything is fine, but when the machine powers on, it always goes to the menu that it displays when you boot off of the floppy (i.e. 1) normal boot 4) intialize disks, etc). This happens even though there's no floppy in the drive. Is there a flag I can set/unset somewhere that will disable this behavior and have it boot straight to the main OS? Thanks, Matt -- Matthew Zito GridApp Systems Email: mzito(a)gridapp.com Cell: 646-220-3551 Phone: 212-358-8211 x 359 http://www.gridapp.com

1 0

Boot menu problem on F760
by Matthew Zito 29 Dec '03

29 Dec '03

Hi, We have a new F760 we just got here - powered it on, booted 6.4.2 from floppy and then used the normal install program to install 6.4.3 over NFS. Everything is fine, but when the machine powers on, it always goes to the menu that it displays when you boot off of the floppy (i.e. 1) normal boot 4) intialize disks, etc). This happens even though there's no floppy in the drive. Is there a flag I can set/unset somewhere that will disable this behavior and have it boot straight to the main OS? Thanks, Matt -- Matthew Zito GridApp Systems Email: mzito(a)gridapp.com Cell: 646-220-3551 Phone: 212-358-8211 x 359 http://www.gridapp.com

1 0

disk_update_fw
by Professor Frink 24 Dec '03

24 Dec '03

Sorry if this is a really basic question. I booted off of floppies (5.3.5R2, I believe it was), and reinitialized the array, took a couple of hours, all seemed to go well. But when it was done, it complained about the firmware revision on all the drives, and recommended I run disk_fw_update. However that command does not seem to be one of the available commands when booting from the floppy (and I can't boot from the array yet). What am I missing? Again, sorry if this is a pretty basic question. Any help would be appreciated.

2 1

RE: Domain users cannot access Filer
by Garavito, Donald, CTR, OSD-ATL 23 Dec '03

23 Dec '03

Correct the entries to read: nobody::65535:65535::/: pcuser::65534:65534::/: root::0:1::/: The other entry is a site-specific. -----Original Message----- From: Garavito, Donald, CTR, OSD-ATL [mailto:Don.Garavito.CTR@osd.mil] Sent: Tuesday, December 23, 2003 11:48 AM To: 'Kale, Nandkishor'; toasters(a)mathworks.com Subject: RE: Domain users cannot access Filer There is a gotcha, CIFS requires that a passwd file with the following minimum entries: notesnetapp::5432:5432::/: nobody::65535:65535::/: pcuser::65534:65534::/: root::0:1::/: By default this file does not exist and if you are running NFS when you invoke CIFS setup NO passwd file is created. Easiest way to correct this is to shutdown NFS and re-run CIFS setup which will create the required passwd file. Have fun... Don -----Original Message----- From: Kale, Nandkishor [mailto:Nandkishor_Kale@bmc.com] Sent: Tuesday, December 23, 2003 9:14 AM To: toasters(a)mathworks.com Subject: Domain users cannot access Filer Hi, I created a machine account for the filer on the Domain, When I run CIFS setup, it runs successfully and says welcome to Domain & CIFS local server is running. But when I try to access the filer on the network using a domain user name, it is not taking the user name & password. Where am I wrong. Regards Manjunath

1 0

quota report error?
by Jeff Burton 23 Dec '03

23 Dec '03

I believe the problem we are having is either a reporting error by 'quota report' or a file system object error. The problem is that we have 4 quota trees that are completely empty but 'quota report' is still showing there is space being used in them. A month ago we moved about 600GB of data from different volumes on 8 740's and 2 230's to newer filers. All of the migrated data was Unix and all were in UNIX type qtree's. All data was moved successfully. The 4 qtrees below had all data migrated off of them, but are still showing space, and files, in quota report: tree 1 vol2 filer1.201 3044 4 89 - /vol/vol2/filer1.201 tree 1 vol1 filer2.101 27272 4 23 - /vol/vol1/filer2.101 tree 5 vol0 filer3.005 60 4 5 - /vol/vol0/filer3.005 tree 3 vol0 filer4.003 2596 4 6 - /vol/vol0/filer4.003 Filer1, filer2, and filer4 are running 6.3.3 and filer3 is running 6.3.1R1. I worked on this with NetApp support and they are not sure what is causing this. They are asking for down-time to further diagnose this, which is not very likely to happen anytime soon. We've tried just about everything with turning quota's on and off and removing and recreating qtrees, to no avail. We also ran wafl iron on one of the volumes. Any other idea's? Thanks, ______________________________________________________________ Jeff Burton Multi-Platform Systems (Storage) Abbott Laboratories

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters