toasters

toasters@lists.teaparty.net

13514 discussions

Start a nNew thread

eBay Security Maintaining
by aw-confirm＠ebay.com 10 Jun '05

10 Jun '05

1 0

RE: A dead f840 ???
by Venkat Appineni 10 Jun '05

10 Jun '05

You might have to replace the Motherboard.. Hope you have support on this system with Netapp.. -Venkat -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Constantin Bogomolnyi Sent: Thursday, June 09, 2005 4:43 PM To: George, Andrew Cc: Constantin Bogomolnyi; toasters(a)mathworks.com Subject: Re: A dead f840 ??? Hi, the console and the lcd shows the same thing , i mean it depend of how loaded it is , if i leave all cards inside and so pci scan takes longer than if there is no card inside to it freeze at the pci scan , if i remove all cards , it jumps until Testing Memory and freeze at this point so its undependant of the boot stage , but dependant on the number of seconds since the power on . thanks cb On Fri, Jun 10, 2005 at 09:09:31AM +1000, George, Andrew wrote: > Hook up the console and see what it says? > Anything showing on the LED display? > > > -----Original Message----- > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > On Behalf Of Constantin Bogomolnyi > Sent: Friday, 10 June 2005 8:44 AM > To: toasters(a)mathworks.com > Subject: A dead f840 ??? > > Hi, > > i just tried to power up an f840 , it freeze approx 45 sec after the > powerup , i tried to remove all cards , and replugged the ram but it > still freeze exactly after 45 sec . > > it look like some "timer" freeze it after N sec . > > maybe the watchdog ?? > > any ideas ? > > thanks > cb > > >

2 1

RE: A dead f840 ???
by Derek Lai 10 Jun '05

10 Jun '05

How long was it unplugged? The NV-RAM battery might be dead, which will cause you problem on booting up. However, usually you will see message on console. Derek -----Original Message----- From: Constantin Bogomolnyi [mailto:const@carpediem.fr] Sent: Thursday, June 09, 2005 4:43 PM To: George, Andrew Cc: Constantin Bogomolnyi; toasters(a)mathworks.com Subject: Re: A dead f840 ??? Hi, the console and the lcd shows the same thing , i mean it depend of how loaded it is , if i leave all cards inside and so pci scan takes longer than if there is no card inside to it freeze at the pci scan , if i remove all cards , it jumps until Testing Memory and freeze at this point so its undependant of the boot stage , but dependant on the number of seconds since the power on . thanks cb On Fri, Jun 10, 2005 at 09:09:31AM +1000, George, Andrew wrote: > Hook up the console and see what it says? > Anything showing on the LED display? > > > -----Original Message----- > From: owner-toasters(a)mathworks.com > [mailto:owner-toasters@mathworks.com] > On Behalf Of Constantin Bogomolnyi > Sent: Friday, 10 June 2005 8:44 AM > To: toasters(a)mathworks.com > Subject: A dead f840 ??? > > Hi, > > i just tried to power up an f840 , it freeze approx 45 sec after the > powerup , i tried to remove all cards , and replugged the ram but it > still freeze exactly after 45 sec . > > it look like some "timer" freeze it after N sec . > > maybe the watchdog ?? > > any ideas ? > > thanks > cb > > >

2 2

RE: A dead f840 ???
by Leeds, Daniel 10 Jun '05

10 Jun '05

I recently picked up an F720 that had been off for over a year or two. The batteries were dead but it was still bootable but would complain. Fun part was I zeroed the disks and went through the ontapp install just fine and upon reboot it would shut itself down after spitting out nvram warning messages and there is no way to override this in 6.5.x so off to buy batteries I went. Everything works fine now that new batteries are in. Im not sure why yours is acting up if its just the nvram battery -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Constantin Bogomolnyi Sent: Thursday, June 09, 2005 5:05 PM To: Derek Lai Cc: 'Constantin Bogomolnyi'; George, Andrew; toasters(a)mathworks.com Subject: Re: A dead f840 ??? it was unplugged for more than one year as far as i know i will try to replace the battery , but i dont understand why it should bug it so much , i mean its a backup battery after , if its dead its not a problem , just nvram is dead right ? also i see there is a huge plumb rechargable battery inside , what its for ? thanks cb On Thu, Jun 09, 2005 at 04:57:34PM -0700, Derek Lai wrote: > How long was it unplugged? The NV-RAM battery might be dead, which will > cause you problem on booting up. However, usually you will see message on > console. > > > Derek > > -----Original Message----- > From: Constantin Bogomolnyi [mailto:const@carpediem.fr] > Sent: Thursday, June 09, 2005 4:43 PM > To: George, Andrew > Cc: Constantin Bogomolnyi; toasters(a)mathworks.com > Subject: Re: A dead f840 ??? > > Hi, > > the console and the lcd shows the same thing , i mean it depend of how > loaded it is , if i leave all cards inside and so pci scan takes longer than > if there is no card inside to it freeze at the pci scan , if i remove all > cards , it jumps until Testing Memory and freeze at this point so its > undependant of the boot stage , but dependant on the number of seconds since > the power on . > > thanks > cb > > On Fri, Jun 10, 2005 at 09:09:31AM +1000, George, Andrew wrote: > > Hook up the console and see what it says? > > Anything showing on the LED display? > > > > > > -----Original Message----- > > From: owner-toasters(a)mathworks.com > > [mailto:owner-toasters@mathworks.com] > > On Behalf Of Constantin Bogomolnyi > > Sent: Friday, 10 June 2005 8:44 AM > > To: toasters(a)mathworks.com > > Subject: A dead f840 ??? > > > > Hi, > > > > i just tried to power up an f840 , it freeze approx 45 sec after the > > powerup , i tried to remove all cards , and replugged the ram but it > > still freeze exactly after 45 sec . > > > > it look like some "timer" freeze it after N sec . > > > > maybe the watchdog ?? > > > > any ideas ? > > > > thanks > > cb > > > > > > >

1 0

Re: A dead f840 ???
by Constantin Bogomolnyi 09 Jun '05

09 Jun '05

Hi, the console and the lcd shows the same thing , i mean it depend of how loaded it is , if i leave all cards inside and so pci scan takes longer than if there is no card inside to it freeze at the pci scan , if i remove all cards , it jumps until Testing Memory and freeze at this point so its undependant of the boot stage , but dependant on the number of seconds since the power on . thanks cb On Fri, Jun 10, 2005 at 09:09:31AM +1000, George, Andrew wrote: > Hook up the console and see what it says? > Anything showing on the LED display? > > > -----Original Message----- > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > On Behalf Of Constantin Bogomolnyi > Sent: Friday, 10 June 2005 8:44 AM > To: toasters(a)mathworks.com > Subject: A dead f840 ??? > > Hi, > > i just tried to power up an f840 , it freeze approx 45 sec after the > powerup , i tried to remove all cards , and replugged the ram but it > still freeze exactly after 45 sec . > > it look like some "timer" freeze it after N sec . > > maybe the watchdog ?? > > any ideas ? > > thanks > cb > > >

1 0

A dead f840 ???
by Constantin Bogomolnyi 09 Jun '05

09 Jun '05

Hi, i just tried to power up an f840 , it freeze approx 45 sec after the powerup , i tried to remove all cards , and replugged the ram but it still freeze exactly after 45 sec . it look like some "timer" freeze it after N sec . maybe the watchdog ?? any ideas ? thanks cb

1 0

RE: > Subject: Common Questions about Piano Tuning
by Sphar, Mike 08 Jun '05

08 Jun '05

You don't need to tuna fish. They're already attuned for the High C. -- Michael W. Sphar - IS&T - Lead Systems Administrator SMBU Engineering Support Services, BMC Software -----Original Message----- From: Colm Buckley [mailto:colm@tuatha.org] Sent: Tuesday, June 07, 2005 4:02 PM To: toasters(a)mathworks.com Subject: Re: > Subject: Common Questions about Piano Tuning > You can tune a filesystem, but you can't tune a fish. As has been pointed out elsewhere, you can tuna fish. In a tuna fish cannery. Colm (the old ones are the... oldest) -- Colm Buckley / colm(a)tuatha.org / +353 87 2469146

2 1

> Subject: Common Questions about Piano Tuning
by ferdberfl＠netzero.net 07 Jun '05

07 Jun '05

You can take a fish to water but you can't make it drink. Filesystems don't do well in water at all. -----Original Message----- From: Michael Coxe [mailto:mcoxe@opsware.com] Sent: Tuesday, June 07, 2005 10:29 AM To: toasters(a)mathworks.com Subject: Re: Common Questions about Piano Tuning > Subject: Common Questions about Piano Tuning from man page for tunefs(8) BUGS You can tune a filesystem, but you can't tune a fish. - michael

4 3

Common Questions about Piano Tuning
by Doug Freeze 07 Jun '05

07 Jun '05

3 of the most commonly asked questions about Piano Tuning are: 1) How often should I have my piano tuned? The two main factors that drive a piano out of tune are weather change and how much the piano is played, but the age of the piano has an effect also. Pianos newer than 5 years go out of tune much faster than older pianos and may need to be tuned as much as 4 times a year for the first few years. Pianos older than 30 years may not have such great action or tone, but often hold their tune very well. If you practice more than an hour a day, you'll probably need to have it tuned at least twice a year to keep it sounding good. I would say that unless your piano is just another piece of furniture, you should have it tuned at least once a year. If it's used every day, twice a year will keep your piano sounding good anytime you or a guest sits down to play it. If you are a vocalist, string player, or that rare pianist with a very sensitive ear, 3-4 times a year will keep it at concert pitch at all times. 2) My piano isn't being used. Do I still need to have it tuned? Although it might seem unnecessary, it's important to keep a piano at least close to concert pitch, even if it's not being used. When your piano is in tune, a combined string tension of about 20 tons is exerted on the piano's structure. As the piano goes out of tune, the tension of the strings changes to varying degrees in different parts of the piano. If the tension becomes too uneven from one section to another, undue stress is exerted on the piano's frame. Also, a piano is much more difficult, and sometimes impossible to tune well after a period of neglect. For these reasons every piano should be tuned at least annually. 3) How much is it going to cost me to tune my piano? Many people ask me this question in hopes of getting a rough estimate of what they would expect to pay for a professional piano tuning. "Pay what you can afford" is my motto. I care more about getting your valuable musical instrument in tune than I do the money. I've found that tuners charge between $75 & $120 here in the Los Angeles area, my average is about $100.00. I would ask that you at least cover my travel expenses with gas prices the way they are. You will not insult me by paying less than the going rate. I have so much fun tuning pianos, meeting and talking to you that it makes it all worth while. If you would like to know the year your piano was born, send me the name of the piano along with the serial number and I'll get back to you as soon as possible with your information. Doug Freeze 626 290-0908 Glendora California http://MasterTuner.com Tuning pianos all over Southern California. See my calendar and schedule a piano tuning appointment here: http://DougFreeze.com/calendar.html Unsubscribe by replying to this message with the word UNSUBSCRIBE in the SUBJECT field, NOT in the body of the message. This is a real unsubscribe request. Not some way of getting you to respond to me so that I know your email address is valid allowing me to sell it to unscrupulous advertisers. I will never give away or sell your email address. Please feel safe replying to me here. I'm sorry I bothered you, I didn't mean to.

4 3

760 SCSI port hung
by Alan Sparks 07 Jun '05

07 Jun '05

I had to unplug my SCSI cable from the onboard port in one of my 760's... I powered off the tape drive at the opposite end of the cable before unplugging and replugging the cable. Made sure twice I didn't bend pins etc. Unfortunately, the attached drive seems no longer to work, trying to access it gives me syslog entries like: netapp1: scsi.cmd.pastTimeToLive:error]: Device 0b.4: request failed after retry #0: cdb 0x00. In anyone's experience, is this likely a hung port, that a reboot is likely to clear? Or does this sound more like a hardware issue (bullet hole in foot)? Thanks for any comments. -Alan =========== Alan Sparks, UNIX/Linux Systems Administrator <asparks(a)doublesparks.net>

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters