toasters

toasters@lists.teaparty.net

13520 discussions

RE: New install
by Kennedy, Jeffrey 11 Jan '06

11 Jan '06

No one's mentioned it but one serious benefit to a separate root volume is an inconsistency state in a non-root volume. http://now.netapp.com/AskNOW/highlight_html.jsp?url=http%3A%2F%2Fnow.net app.com%2FNOW%2Fknowledge%2Fdocs%2Fontap%2Frel701r1_gf%2Fhtml%2Fgfiler%2 Fplanning%2Fstorpla5.htm&sentenceId=70026552&titleIds=70026550%2C7002650 9%2C70026504#1291843 ~JK ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Mike Wargel Sent: Tuesday, January 10, 2006 10:25 AM To: Callaway, Michael; Tim Longo; toasters(a)mathworks.com Subject: RE: New install The other thing to consider is mixing drive sizes in same filer. Just want to make sure you have at least one spare of each size... Mike Wargel Senior Systems Engineer Custom Storage, Inc mwargel(a)customstorage.com O: 480 941-4026, x101 C: 602 690-4788 ________________________________ From: Callaway, Michael [mailto:Mcallaway@ntta.org] Sent: Tuesday, January 10, 2006 11:21 AM To: Mike Wargel; Tim Longo; toasters(a)mathworks.com Subject: RE: New install True, but 2 36GB drives out of 112 discs, most 72GB, they aren't really that missed. Like he said though, you may be better off converting and resizing to your needs/recommended root vol size. Thanks, Michael NTTA/IT http://www.ntta.org <http://www.ntta.org/> 214.461.2033 ________________________________ From: Mike Wargel [mailto:mwargel@cstor.com] Sent: Tuesday, January 10, 2006 11:49 AM To: Callaway, Michael; Tim Longo; toasters(a)mathworks.com Subject: RE: New install On a 270 with only 14 drives, we've setup systems to migrate entirely to flexvols, including vol0. Maximizes effective disk usage and can resize vol0 as needed. Most vol0's are 25G or less and use a tenth of that. Quite a sacrifice of 2 disks IMO. Mike Mike Wargel Senior Systems Engineer Custom Storage, Inc mwargel(a)customstorage.com O: 480 941-4026, x101 C: 602 690-4788 ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Callaway, Michael Sent: Tuesday, January 10, 2006 10:14 AM To: Tim Longo; toasters(a)mathworks.com Subject: RE: New install We left vol0 as it was, but it's a very small vol, 2 discs if I remember correctly. We just have it there for the system files. Everything else is flex vols in aggr. Thanks, Michael Callaway Systems Support Technician North Texas Tollway Authority/IT Department http://www.ntta.org <http://www.ntta.org> 214.461.2033 office 214.325.5523 mobile 972.930.2633 fax ________________________________ From: owner-toasters(a)mathworks.com on behalf of Tim Longo Sent: Tue 1/10/2006 9:28 AM To: toasters(a)mathworks.com Subject: New install I'm in the process of setting up a new FAS270. The first thing I did was upgrade firmware/nd Ontap to version 7. After doing some reading, I think I will plan to implement FlexVols in the remaining free space. The root Vol0 seems to be bigger than I would have made it, and it seems it needs to be a traditional Vol that I cannot resize. I'd be interested to know what other people are doing here... are you leaving Vol0 as a traditional volume and adding other flex vols? What about resizing the root volume? Thanks.

1 0

Shareholder Release
by Nik Albert 10 Jan '06

10 Jan '06

WE TOLD YOU TO WATCH!!! IT'S STILL NOT TOO LATE! TRADING ALERT!!! Issued for Tuesday Jan, 10th 2006 Company: Remington Ventures Inc. Symbol: RMVN Jan 4th Open: $0.51 Last Trade Jan 9th: $1.28 UP $0.77 (150%) Short Term: $2.00-$3.00 Long Term: $5.00 Status: Strong Buy Remington Ventures Flips the 1.5 Trillion Dollar Daily Currency Exchange Market with new technology. *** About the Company RMVN has been developing new technology for the past 12 months that will change Forex Trading (Global Currency Exchange) for the world. What is Forex Trading? As a 24 hour market, Forex trading starts in Sydney, and moves around the world as the day begins in each financial market, begining with Tokyo, London, and New York. Unlike any other financial market, investors can respond to currency fluctuations at the time they occur - day or night. Here is What the Technology Does This new software system that automatically renders neural network predictions from real time data. The system's neural network input database is designed so that the neural net actually chooses the instrument to trade as well as the trade parameters. A neural network is a software (or hardware) simulation of a biological brain (sometimes called Artificial Neural Network or "ANN"). The purpose of a neural network is to learn to recognize patterns in your data. Once the neural network has been trained on samples of your data, it can make predictions by detecting similar patterns in future data. Software that learns is truly "Artificial Intelligence". *** RMVN is our BIG PICK, Good Trading To You All! PLEASE WATCH RMVN TRADE ON TUESDAY JAN, 10th

1 0

Re: let
by Michaud Merrill 10 Jan '06

10 Jan '06

distracted Miss Murdstone, by an expressive sound, a long drawn respiration, been anxious to make, concerning the accounts, the housekeeping, believe Miss Mills must have been born to be a blessing to us. She I beg to ask, Mr. Copperfield, if you have anything to say in

1 0

RE: New install
by Lai, Derek 10 Jan '06

10 Jan '06

You can convert the root volume to a flexvol. On systems like the FAS250 and FAS270 it yields the most benefits with the limited number of disks/shelves supported. The root volume never goes over a couple of GB. So to be really save, allocate 10 GB to it. No sense wasting 2 entire disks for it. Put it on an aggregate with other flexvols. Derek -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Tim Longo Sent: Tuesday, January 10, 2006 7:29 AM To: toasters(a)mathworks.com Subject: New install I'm in the process of setting up a new FAS270. The first thing I did was upgrade firmware/nd Ontap to version 7. After doing some reading, I think I will plan to implement FlexVols in the remaining free space. The root Vol0 seems to be bigger than I would have made it, and it seems it needs to be a traditional Vol that I cannot resize. I'd be interested to know what other people are doing here... are you leaving Vol0 as a traditional volume and adding other flex vols? What about resizing the root volume? Thanks.

1 0

RE: New install
by Mike Wargel 10 Jan '06

10 Jan '06

The other thing to consider is mixing drive sizes in same filer. Just want to make sure you have at least one spare of each size... Mike Wargel Senior Systems Engineer Custom Storage, Inc mwargel(a)customstorage.com O: 480 941-4026, x101 C: 602 690-4788 ________________________________ From: Callaway, Michael [mailto:Mcallaway@ntta.org] Sent: Tuesday, January 10, 2006 11:21 AM To: Mike Wargel; Tim Longo; toasters(a)mathworks.com Subject: RE: New install True, but 2 36GB drives out of 112 discs, most 72GB, they aren't really that missed. Like he said though, you may be better off converting and resizing to your needs/recommended root vol size. Thanks, Michael NTTA/IT http://www.ntta.org <http://www.ntta.org/> 214.461.2033 ________________________________ From: Mike Wargel [mailto:mwargel@cstor.com] Sent: Tuesday, January 10, 2006 11:49 AM To: Callaway, Michael; Tim Longo; toasters(a)mathworks.com Subject: RE: New install On a 270 with only 14 drives, we've setup systems to migrate entirely to flexvols, including vol0. Maximizes effective disk usage and can resize vol0 as needed. Most vol0's are 25G or less and use a tenth of that. Quite a sacrifice of 2 disks IMO. Mike Mike Wargel Senior Systems Engineer Custom Storage, Inc mwargel(a)customstorage.com O: 480 941-4026, x101 C: 602 690-4788 ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Callaway, Michael Sent: Tuesday, January 10, 2006 10:14 AM To: Tim Longo; toasters(a)mathworks.com Subject: RE: New install We left vol0 as it was, but it's a very small vol, 2 discs if I remember correctly. We just have it there for the system files. Everything else is flex vols in aggr. Thanks, Michael Callaway Systems Support Technician North Texas Tollway Authority/IT Department http://www.ntta.org <http://www.ntta.org> 214.461.2033 office 214.325.5523 mobile 972.930.2633 fax ________________________________ From: owner-toasters(a)mathworks.com on behalf of Tim Longo Sent: Tue 1/10/2006 9:28 AM To: toasters(a)mathworks.com Subject: New install I'm in the process of setting up a new FAS270. The first thing I did was upgrade firmware/nd Ontap to version 7. After doing some reading, I think I will plan to implement FlexVols in the remaining free space. The root Vol0 seems to be bigger than I would have made it, and it seems it needs to be a traditional Vol that I cannot resize. I'd be interested to know what other people are doing here... are you leaving Vol0 as a traditional volume and adding other flex vols? What about resizing the root volume? Thanks.

1 0

RE: New install
by Callaway, Michael 10 Jan '06

10 Jan '06

True, but 2 36GB drives out of 112 discs, most 72GB, they aren't really that missed. Like he said though, you may be better off converting and resizing to your needs/recommended root vol size. Thanks, Michael NTTA/IT http://www.ntta.org <http://www.ntta.org/> 214.461.2033 ________________________________ From: Mike Wargel [mailto:mwargel@cstor.com] Sent: Tuesday, January 10, 2006 11:49 AM To: Callaway, Michael; Tim Longo; toasters(a)mathworks.com Subject: RE: New install On a 270 with only 14 drives, we've setup systems to migrate entirely to flexvols, including vol0. Maximizes effective disk usage and can resize vol0 as needed. Most vol0's are 25G or less and use a tenth of that. Quite a sacrifice of 2 disks IMO. Mike Mike Wargel Senior Systems Engineer Custom Storage, Inc mwargel(a)customstorage.com O: 480 941-4026, x101 C: 602 690-4788 ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Callaway, Michael Sent: Tuesday, January 10, 2006 10:14 AM To: Tim Longo; toasters(a)mathworks.com Subject: RE: New install We left vol0 as it was, but it's a very small vol, 2 discs if I remember correctly. We just have it there for the system files. Everything else is flex vols in aggr. Thanks, Michael Callaway Systems Support Technician North Texas Tollway Authority/IT Department http://www.ntta.org <http://www.ntta.org> 214.461.2033 office 214.325.5523 mobile 972.930.2633 fax ________________________________ From: owner-toasters(a)mathworks.com on behalf of Tim Longo Sent: Tue 1/10/2006 9:28 AM To: toasters(a)mathworks.com Subject: New install I'm in the process of setting up a new FAS270. The first thing I did was upgrade firmware/nd Ontap to version 7. After doing some reading, I think I will plan to implement FlexVols in the remaining free space. The root Vol0 seems to be bigger than I would have made it, and it seems it needs to be a traditional Vol that I cannot resize. I'd be interested to know what other people are doing here... are you leaving Vol0 as a traditional volume and adding other flex vols? What about resizing the root volume? Thanks.

1 0

RE: New install
by Mike Wargel 10 Jan '06

10 Jan '06

If the 270 is in fact a clustered 270 (270c), then the 2nd root volume would need at least 2 disks for the 2nd head, but would still do all aggrs and flex vols, at least for the first/primary head and leave one spare for the shelf. Mike Wargel Senior Systems Engineer Custom Storage, Inc mwargel(a)customstorage.com O: 480 941-4026, x101 C: 602 690-4788 -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Skottie Miller Sent: Tuesday, January 10, 2006 10:58 AM To: Tim Longo Cc: toasters(a)mathworks.com Subject: Re: New install re-zero the disks and create an aggregate. then, the root vol, vol0 can be any size you want within that aggregate, and you can then create/remove/resize other volumes for your production data. we create a small (20G) vol0 as root in the root aggregate on every filer, and use the rest of the space for one or more FlexVols or FlexCache vols within the other aggregates. -skottie Tim Longo wrote: > I'm in the process of setting up a new FAS270. The first thing I did was > upgrade firmware/nd Ontap to version 7. After doing some reading, I > think I will plan to implement FlexVols in the remaining free space. The > root Vol0 seems to be bigger than I would have made it, and it seems it > needs to be a traditional Vol that I cannot resize. I'd be interested to > know what other people are doing here... are you leaving Vol0 as a > traditional volume and adding other flex vols? What about resizing the > root volume? > > Thanks. > -- Scott Miller skottie(a)anim.DreamWorks.com

1 0

RE: New install
by Mike Wargel 10 Jan '06

10 Jan '06

On a 270 with only 14 drives, we've setup systems to migrate entirely to flexvols, including vol0. Maximizes effective disk usage and can resize vol0 as needed. Most vol0's are 25G or less and use a tenth of that. Quite a sacrifice of 2 disks IMO. Mike Mike Wargel Senior Systems Engineer Custom Storage, Inc mwargel(a)customstorage.com O: 480 941-4026, x101 C: 602 690-4788 ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Callaway, Michael Sent: Tuesday, January 10, 2006 10:14 AM To: Tim Longo; toasters(a)mathworks.com Subject: RE: New install We left vol0 as it was, but it's a very small vol, 2 discs if I remember correctly. We just have it there for the system files. Everything else is flex vols in aggr. Thanks, Michael Callaway Systems Support Technician North Texas Tollway Authority/IT Department http://www.ntta.org <http://www.ntta.org> 214.461.2033 office 214.325.5523 mobile 972.930.2633 fax ________________________________ From: owner-toasters(a)mathworks.com on behalf of Tim Longo Sent: Tue 1/10/2006 9:28 AM To: toasters(a)mathworks.com Subject: New install I'm in the process of setting up a new FAS270. The first thing I did was upgrade firmware/nd Ontap to version 7. After doing some reading, I think I will plan to implement FlexVols in the remaining free space. The root Vol0 seems to be bigger than I would have made it, and it seems it needs to be a traditional Vol that I cannot resize. I'd be interested to know what other people are doing here... are you leaving Vol0 as a traditional volume and adding other flex vols? What about resizing the root volume? Thanks.

1 0

RE: New install
by Callaway, Michael 10 Jan '06

10 Jan '06

We left vol0 as it was, but it's a very small vol, 2 discs if I remember correctly. We just have it there for the system files. Everything else is flex vols in aggr. Thanks, Michael Callaway Systems Support Technician North Texas Tollway Authority/IT Department http://www.ntta.org <http://www.ntta.org> 214.461.2033 office 214.325.5523 mobile 972.930.2633 fax ________________________________ From: owner-toasters(a)mathworks.com on behalf of Tim Longo Sent: Tue 1/10/2006 9:28 AM To: toasters(a)mathworks.com Subject: New install I'm in the process of setting up a new FAS270. The first thing I did was upgrade firmware/nd Ontap to version 7. After doing some reading, I think I will plan to implement FlexVols in the remaining free space. The root Vol0 seems to be bigger than I would have made it, and it seems it needs to be a traditional Vol that I cannot resize. I'd be interested to know what other people are doing here... are you leaving Vol0 as a traditional volume and adding other flex vols? What about resizing the root volume? Thanks.

1 0

REPRESENTATIVE
by Daniel Ndiaye-Nkono 10 Jan '06

10 Jan '06

TIMBERLAND IMPORT & EXPORT COMPANY 247 OKASAWA WAY,CENTRAL KWALA LUMPUR MALAYSIA EMAIL: TIEC2006(a)netscape.net, ATTN: (REQUEST FOR REPRESENTATIVE.) Sir/Madam It is my pleasure to write you in respect of our organisation. We are experts in the sale of TIMBER and RUBBER products.We often export to Canada/America and other parts of Europe. We are searching for representatives who can serve as a medium of getting our funds from our costumers in Canada/America/Europe as well as making payments through these representatives to us. Please if you are interested in transacting business in view of being one of our agents, so that our clients could make payments to you on our behalf . Compensations will be given and other renumeration benefits. Contact us for more information, If this proposal is acceptable to you. Note that, as our representative, you will receive 10%(ten percent) of whatever amount you clear for the company and the balance will be paid into an account we will provide for you.If the conditions stipulated above is accepted by you, do not hesitate to contact us by emailing the following to us: (1)Your full names: (2)Contact address: (3)Phone/fax numbers: (4)Occupation and (5)Age For more clarifications please contact me through my personal email; TIEC2006(a)netscape.net, Best regards Daniel Ndiaye-Nkono.(Ceo)

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters