toasters

toasters@lists.teaparty.net

13520 discussions

RE: Some Filerview Pages Not Working
by Webster, Stetson 12 Mar '08

12 Mar '08

Assuming that the entire install was successful, there is a bug report on that. It happens to be an issue with some java setting (I don't remember which). In short, there is a simple setting to fix this. Now, back to the initial comment on the success of the upgrade: using the 'software install' command rather than unzipping into the vol0 share is always your best bet to unravel the files properly. Unless you used the 'software install' method, It is possible that files in /etc/java can be missing, etc Good luck . -----Original Message----- From: Timothy Hollingworth [mailto:thollingsworth@EPLUS.com] Sent: Wednesday, March 12, 2008 01:21 PM Pacific Standard Time To: toasters(a)mathworks.com Subject: Some Filerview Pages Not Working Upgrade of N'tap 7.0.x to 7.2.4 and now some filerview pages initialize java and then do not display. Happens with IE 6 and 7, various windows versions and Mozilla as well. Filer --> Use Command Line Filer --> Configure Autosupport And other pages. Anyone see this issue? Timothy L. Hollingworth | Sr. Network Engineer | ePlus Technology Inc. MCSE | VMware VCP | HP ASE-BladeSystem | NetApp ASA/NACA | Symantec Technical Specialist HollingworthTim (AIM/YIM) | 678.462.6698 (Cell) | http://www.eplus.com

2 2

Re: Can I view AD users data on filer
by Evan Battle 12 Mar '08

12 Mar '08

If you are asking can you browse the file data of a user that resides in AD, the answer is yes, if you have the rights to do so. I am assuming you are referring to user data that resides in a CIFS share on the filer, the same rules apply to permissions (both share and NTFS) on the filer as they do in the Windows file server world. xischaune wrote: > > Hello everyone... > I am new to data ontap. Just wondering, is it possible for me to browse AD > users' data on the storage...if yes...how??? > Thanx > -- View this message in context: http://www.nabble.com/Can-I-view-AD-users-data-on-filer-tp16002550p16011958… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com. The size of the volumes match of course for the correct use of > SnapMirror. Other volumes such as vol0 etc also identical. > > The oddity is that we have ~320Gb free on the source filer and ~680Gb free > on the destination! I have been over the filers with a fine tooth comb > and everything is identical. Of course I was worried that not everything > is being replicated as required to the destination but it is... > > I've been using filers for about 6 years so I thought I was well versed > but this has me stumped! > > Any ideas would be gratefully received! > > Many Thanks, > > Trevor > > -- View this message in context: http://www.nabble.com/Aggregate-space-differences-between-snapmirrored-file… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

1 0

RE: Expand LUN for Exch data
by Learmonth, Peter 12 Mar '08

12 Mar '08

SnapDrive makes an API call to expand the NTFS partition and file system within it. (It grows the LUN first.) This can be done with Exchange running. We demo this all the time. Happy holidays!! Share and Enjoy! Peter ... Sent from one of those phone+email doohicky things... I reserve the right to be wrong. -----Original Message----- From: Johnson, James A [HDS] [mailto:James.Johnson8@hdsupply.com] Sent: Monday, December 24, 2007 12:52 PM Pacific Standard Time To: Miller, Michael CTR USTRANSCOM J2; Kevin Parker; NetApp list Subject: RE: Expand LUN for Exch data How would that be possible? James -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Miller, Michael CTR USTRANSCOM J2 Sent: Friday, November 30, 2007 7:26 AM To: Kevin Parker; NetApp list Subject: RE: Expand LUN for Exch data Kevin Yes you can. I have done it a few times already with no problems. Mike Miller General Dynamics Information Technology Michael.Miller(a)gdit.com -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Kevin Parker Sent: Friday, November 30, 2007 8:05 AM To: NetApp list Subject: Expand LUN for Exch data I'm off network so I can't research this, but want to ensure that I can expand a LUN for Exchange on the fly, no downtime. Plan to use SnapDrive 5.0. Volume is already large enough in capacity. Thanks!! Best regards, Kevin M. Parker Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.

8 11

Accessing RLM using PuTTY (ssh) unresponsive
by slemmesmi 11 Mar '08

11 Mar '08

Dear all, Have FAS3020 single head running ONTAP 7.0.2 at customer site. I have no problem using PuTTY ssh to access the CLI of the FAS. Have configured RLM and it's running fine - 'rlm status' shows: myfas> rlm status Remote LAN Module Status: Online Part Number: 110-00030 Revision: C0 Serial Number: 312392 Firmware Version: 1.1.0 Mgmt MAC Address: 00:A0:98:01:EC:FC Using DHCP: no IP Address: 192.168.1.20 Netmask: 255.255.255.0 Gateway: 192.168.1.1 The RLM responds to ping and I can connect to this without problems using OpenSSH (version 3.8.1) from http://sourceforge.net/projects/sshwindows/ However when I try using SSH in PuTTY to connect to the RLM, I get as far as entering user and password, then the sessions seams unresponsive and appears to "hang": rlmroot@myfasrlm's password: When I then press CTRL+D to close the session, I briefly see the RLM prompt: RLM myfas> In PuTTY, as template for the ssh session to the RLM (myfasrlm), I use the ssh session (myfas) I created for the FAS "normal" ssh access, registry entries for that shows the settings: [HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\Sessions\myfasrlm] "Present"=dword:00000001 "HostName"="myfasrlm" "LogFileName"="C:\\Temp\\myfasrlm.log" "LogType"=dword:00000001 "LogFileClash"=dword:00000000 "LogFlush"=dword:00000001 "SSHLogOmitPasswords"=dword:00000001 "SSHLogOmitData"=dword:00000000 "Protocol"="ssh" "PortNumber"=dword:00000016 "CloseOnExit"=dword:00000001 "WarnOnClose"=dword:00000001 "PingInterval"=dword:00000000 "PingIntervalSecs"=dword:00000000 "TCPNoDelay"=dword:00000001 "TCPKeepalives"=dword:00000000 "TerminalType"="xterm" "TerminalSpeed"="38400,38400" "TerminalModes"="INTR=A,QUIT=A,ERASE=A,KILL=A,EOF=A,EOL=A,EOL2=A,START=A,STOP=A,SUSP=A,DSUSP=A,REPRINT=A,WERASE=A,LNEXT=A,FLUSH=A,SWTCH=A,STATUS=A,DISCARD=A,IGNPAR=A,PARMRK=A,INPCK=A,ISTRIP=A,INLCR=A,IGNCR=A,ICRNL=A,IUCLC=A,IXON=A,IXANY=A,IXOFF=A,IMAXBEL=A,ISIG=A,ICANON=A,XCASE=A,ECHO=A,ECHOE=A,ECHOK=A,ECHONL=A,NOFLSH=A,TOSTOP=A,IEXTEN=A,ECHOCTL=A,ECHOKE=A,PENDIN=A,OPOST=A,OLCUC=A,ONLCR=A,OCRNL=A,ONOCR=A,ONLRET=A,CS7=A,CS8=A,PARENB=A,PARODD=A," "AddressFamily"=dword:00000000 "ProxyExcludeList"="" "ProxyDNS"=dword:00000001 "ProxyLocalhost"=dword:00000000 "ProxyMethod"=dword:00000000 "ProxyHost"="proxy" "ProxyPort"=dword:00000050 "ProxyUsername"="" "ProxyPassword"="" "ProxyTelnetCommand"="connect %host %port\\n" "Environment"="" "UserName"="" "LocalUserName"="" "NoPTY"=dword:00000001 "Compression"=dword:00000000 "TryAgent"=dword:00000001 "AgentFwd"=dword:00000000 "ChangeUsername"=dword:00000000 "Cipher"="aes,blowfish,3des,WARN,arcfour,des" "KEX"="dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,WARN" "RekeyTime"=dword:0000003c "RekeyBytes"="1G" "SshNoAuth"=dword:00000000 "AuthTIS"=dword:00000000 "AuthKI"=dword:00000001 "SshNoShell"=dword:00000000 "SshProt"=dword:00000002 "SSH2DES"=dword:00000000 "PublicKeyFile"="" "RemoteCommand"="" "RFCEnviron"=dword:00000000 "PassiveTelnet"=dword:00000000 "BackspaceIsDelete"=dword:00000001 "RXVTHomeEnd"=dword:00000000 "LinuxFunctionKeys"=dword:00000000 "NoApplicationKeys"=dword:00000000 "NoApplicationCursors"=dword:00000000 "NoMouseReporting"=dword:00000000 "NoRemoteResize"=dword:00000000 "NoAltScreen"=dword:00000000 "NoRemoteWinTitle"=dword:00000000 "RemoteQTitleAction"=dword:00000001 "NoDBackspace"=dword:00000000 "NoRemoteCharset"=dword:00000000 "ApplicationCursorKeys"=dword:00000000 "ApplicationKeypad"=dword:00000000 "NetHackKeypad"=dword:00000000 "AltF4"=dword:00000001 "AltSpace"=dword:00000000 "AltOnly"=dword:00000000 "ComposeKey"=dword:00000000 "CtrlAltKeys"=dword:00000001 "TelnetKey"=dword:00000000 "TelnetRet"=dword:00000001 "LocalEcho"=dword:00000001 "LocalEdit"=dword:00000001 "Answerback"="PuTTY" "AlwaysOnTop"=dword:00000000 "FullScreenOnAltEnter"=dword:00000000 "HideMousePtr"=dword:00000000 "SunkenEdge"=dword:00000000 "WindowBorder"=dword:00000001 "CurType"=dword:00000000 "BlinkCur"=dword:00000000 "Beep"=dword:00000001 "BeepInd"=dword:00000000 "BellWaveFile"="" "BellOverload"=dword:00000001 "BellOverloadN"=dword:00000005 "BellOverloadT"=dword:000007d0 "BellOverloadS"=dword:00001388 "ScrollbackLines"=dword:000007d0 "DECOriginMode"=dword:00000000 "AutoWrapMode"=dword:00000001 "LFImpliesCR"=dword:00000000 "DisableArabicShaping"=dword:00000000 "DisableBidi"=dword:00000000 "WinNameAlways"=dword:00000001 "WinTitle"="" "TermWidth"=dword:00000080 "TermHeight"=dword:00000030 "Font"="Courier New" "FontIsBold"=dword:00000000 "FontCharSet"=dword:00000000 "FontHeight"=dword:0000000a "FontQuality"=dword:00000000 "FontVTMode"=dword:00000004 "UseSystemColours"=dword:00000000 "TryPalette"=dword:00000000 "ANSIColour"=dword:00000001 "Xterm256Colour"=dword:00000001 "BoldAsColour"=dword:00000001 "Colour0"="0,255,0" "Colour1"="255,255,255" "Colour2"="0,0,0" "Colour3"="85,85,85" "Colour4"="0,0,0" "Colour5"="0,255,0" "Colour6"="0,0,0" "Colour7"="85,85,85" "Colour8"="187,0,0" "Colour9"="255,85,85" "Colour10"="0,187,0" "Colour11"="85,255,85" "Colour12"="187,187,0" "Colour13"="255,255,85" "Colour14"="0,0,187" "Colour15"="85,85,255" "Colour16"="187,0,187" "Colour17"="255,85,255" "Colour18"="0,187,187" "Colour19"="85,255,255" "Colour20"="187,187,187" "Colour21"="255,255,255" "RawCNP"=dword:00000000 "PasteRTF"=dword:00000000 "MouseIsXterm"=dword:00000000 "RectSelect"=dword:00000000 "MouseOverride"=dword:00000001 "Wordness0"="0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0" "Wordness32"="0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1" "Wordness64"="1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2" "Wordness96"="1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1" "Wordness128"="1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1" "Wordness160"="1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1" "Wordness192"="2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2" "Wordness224"="2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2" "LineCodePage"="" "CJKAmbigWide"=dword:00000000 "UTF8Override"=dword:00000001 "Printer"="" "CapsLockCyr"=dword:00000000 "ScrollBar"=dword:00000001 "ScrollBarFullScreen"=dword:00000000 "ScrollOnKey"=dword:00000000 "ScrollOnDisp"=dword:00000001 "EraseToScrollback"=dword:00000001 "LockSize"=dword:00000000 "BCE"=dword:00000001 "BlinkText"=dword:00000000 "X11Forward"=dword:00000000 "X11Display"="" "X11AuthType"=dword:00000001 "LocalPortAcceptAll"=dword:00000000 "RemotePortAcceptAll"=dword:00000000 "PortForwardings"="" "BugIgnore1"=dword:00000000 "BugPlainPW1"=dword:00000000 "BugRSA1"=dword:00000000 "BugHMAC2"=dword:00000000 "BugDeriveKey2"=dword:00000000 "BugRSAPad2"=dword:00000000 "BugPKSessID2"=dword:00000000 "BugRekey2"=dword:00000000 "StampUtmp"=dword:00000001 "LoginShell"=dword:00000001 "ScrollbarOnLeft"=dword:00000000 "BoldFont"="" "BoldFontIsBold"=dword:00334b28 "BoldFontCharSet"=dword:0046f79c "BoldFontHeight"=dword:0012fa00 "WideFont"="" "WideFontIsBold"=dword:0bd1a9ba "WideFontCharSet"=dword:00334b28 "WideFontHeight"=dword:0012cc48 "WideBoldFont"="" "WideBoldFontIsBold"=dword:0077654e "WideBoldFontCharSet"=dword:0bd1a9ba "WideBoldFontHeight"=dword:003a0178 "ShadowBold"=dword:00000000 "ShadowBoldOffset"=dword:00000001 "SerialLine"="COM1" "SerialSpeed"=dword:00002580 "SerialDataBits"=dword:00000008 "SerialStopHalfbits"=dword:00000002 "SerialParity"=dword:00000000 "SerialFlowControl"=dword:00000001 Has anybody got an idea what the problem is with the above - do I need to change a setting or two? I can of course implement OpenSSH as work around for the customer, but customer prefer PuTTY (for obvious reasons). Kind regards, Soren -- View this message in context: http://www.nabble.com/Accessing-RLM-using-PuTTY-%28ssh%29-unresponsive-tp15… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

3 2

Quotas for A.D. groups
by Kevin Parker 11 Mar '08

11 Mar '08

Toasters: Client wants ability to quota by Active Directory group. I see some products out there, but none seem to be able to set a quota on a volume/qtree/directory with the quota pertaining to an A.D. group. Only way I've implemented these in the past is to control access via NTFS ACL such that the A.D. group has write access (everyone else read or none), then set qtree quota. Client has political reasons not to restrict access via NTFS. This is NAS/CIFS only environment. Has anyone else out there found another way, or using any other 3rd party *ware? Best regards, Kevin M. Parker [cid:image001.gif@01C87EC2.A5BBE990]<http://www.nwnit.com/> [cid:image002.png@01C87EC2.A5BBE990] Sr. Storage Solutions Engineer l 919.830.5819 mobile l 919.653.4489 office l 860 Aviation Pkwy., Ste. 1000, Morrisville, NC 27560 ________________________________ Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.

7 7

Re: FCP curiosity
by Fred Grieco 09 Mar '08

09 Mar '08

Almost certainly this is due to inconsistent zoning on the Brocade, or missing zoning for the filer ports on that switch. If you are seeing one listing for each initiator, then those are probably coming through the interconnect. ----- Original Message ---- From: Milazzo Giacomo <G.Milazzo(a)sinergy.it> To: toasters(a)mathworks.com Sent: Thursday, March 6, 2008 2:51:34 PM Subject: FCP curiosity  Hi I’ve just set up a 3020C with two HBA attached to acouple of Brocade, and on these, 2 couple of HBA coming from 2 Windows host. ASAN, do you know it? J The links are the usual ones: i.e. the 1st HBA of host “A” to the upper Brocade, the 2nd to the lower and so on…the 0b of the head to the upper, the 0d to the lower and the same for other head. When I perform a scan of fcp channels (priv set advanced, don’t remember now the command) from one of the two head of the 3020C I see 4 WWN of the 4 HBA of the hosts repente two times (4 real and 4 replicated) and I’ve already saw this times ago (the path is replicated through the cluster interconnect). But when I perform the same from the other head I can see only 4 WWN belonging to the hosts. Why? Something wrong on link of the hosts to the couple of switch? Maybe because I’ve not yet zoned the switches? Thanx a lot

2 1

DS14 mk1 shelf with new disk in caddy?
by Delorean7 09 Mar '08

09 Mar '08

It simply amazes me still how some people can take a piece of expensive sophisticated technology and treat it like it was a free giveaway or something. A disk has failed in an older DS14 shelf 144 GB 10k fc (Part X274) and the admin replaced it with a run of the mill brand disk hoping it would replace it because it is 'just' a RAID array ;). We have some spare newer 144 GB 10k disks for DS14mk2/4 lying about, do they fit with these older shelve types? Current disks report as: NETAPP X274_HPYTA146F10 NA02 136.0GB 520B/sec -- View this message in context: http://www.nabble.com/DS14-mk1-shelf-with-new-disk-in-caddy--tp15943410p159… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

3 2

Jumbo Packets with netapp FAS3050
by Brent Ellis 08 Mar '08

08 Mar '08

Hello All, We have been using our netapp primarily for NAS storage, but I am experimenting with iSCSI now for some specific applications. I managed to create a bit of a network issue recently when I tried enabling jumbo packets on my netapp and my test server. The iSCSI connection kept resyncing and was not stable. I think this was because I didn't create a separate vlan for the devices using jumbo packets. Upon further research, I found mention that some devices/ oses calculate the checksums differently and that can affect the max packet size. Does anyone have any recommendations for a packet size for both the netapp and for my linux servers? is 10240 a safe bet(max size supported by my switch) or should I use something like 9000 or 8192? Should I use a different packet size if I am connecting a target to a windows box? I would ideally like to make a jumbo packets vlan and just set all the devices on that vlan to a larger MTU, but I don't want to create a network traffic problem in the process. Brent Ellis Systems Analyst/Consultant CAS Computing Services Group Boston University interi(a)bu.edu

10 12

VMware - snap - backup
by Amateur-FASadmin 07 Mar '08

07 Mar '08

Dear group. I have some scripting working now - 1- Snap all VM machines on ESX 2- Snap VOL on filer 3- delete snaps on ESX - Question is: How do I copy/backup out my Snaps on the filer ? I have an external Windows Server and software iSCSI. License is only iSCSI on the filer. Thanks - Jesper Harder ----- -I have a high Google IQ -- View this message in context: http://www.nabble.com/VMware---snap---backup-tp15816945p15816945.html Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

14 26

cached iscsi initiator?
by Skip Norman 06 Mar '08

06 Mar '08

Hello All, I am currently having a problem with a linux software iscsi initiator that seems to be cached. When I attempt to make the connection from the iscsi interface to the filer, I end up with two iqn's from the same host on the filer via "iscsi show initiator". The problem then is that I cannot mount the LUN due to their being duplicate initiators. Is there a way to clear a cached initiator? Thanks.

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters