Failed Aggregate 0

List overview All Threads
Download

newer

older

Re: Failed Aggregate 0

Re: volume move and SFO

dhichandler

19 Aug 2018 19 Aug '18

10:17 p.m.

I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk failure in one of our raid groups and looking for help recovering. The unit is out of warranty and support. Any help is appreciated.

----- Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/

Show replies by date

Timothy Naple

19 Aug 19 Aug

10:22 p.m.

Christopher,

Is it 7-mode? Can you send the output of 'aggr status -r'?

Thank you, Tim

From: chris@dhinnovations.com Sent: August 19, 2018 3:14 PM To: toasters@teaparty.net Subject: Failed Aggregate 0

----- Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/ _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters

tmac

10:23 p.m.

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*

*I Blog at TMACsRack https://tmacsrack.wordpress.com/*

On Sun, Aug 19, 2018 at 6:21 PM dhichandler chris@dhinnovations.com wrote:

...

I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk failure in one of our raid groups and looking for help recovering. The unit is out of warranty and support. Any help is appreciated.

Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/ _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters

Christopher D. Chandler

10:26 p.m.

Aggr State Status Options aggr0 online raid_dp, aggr root, diskroot, nosnap=off, raidtype=raid_dp, degraded raidsize=16, raid_lost_write=on, 64-bit ignore_inconsistent=off, snapmirrored=off, rlw_on resyncsnaptime=60, fs_size_fixed=off, lost_write_protect=on, no_delete_log=off, ha_policy=cfo, hybrid_enabled=off, percent_snapshot_space=0%, free_space_realloc=off, raid_cv=on, thorough_scrub=off Volumes: dcs_ds_01, dcs_iso, vol0 Plex /aggr0/plex0: online, normal, active RAID group /aggr0/plex0/rg0: double degraded, block checksums RAID group /aggr0/plex0/rg1: double degraded, block checksums RAID group /aggr0/plex0/rg2: normal, block checksums

________________________________ From: tmac tmacmd@gmail.com Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam

I Blog at TMACsRackhttps://tmacsrack.wordpress.com/

On Sun, Aug 19, 2018 at 6:21 PM dhichandler <chris@dhinnovations.commailto:chris@dhinnovations.com> wrote: I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk failure in one of our raid groups and looking for help recovering. The unit is out of warranty and support. Any help is appreciated.

Timothy Naple

10:26 p.m.

Christoper,

aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares? (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

From: chris@dhinnovations.com Sent: August 19, 2018 3:23 PM To: tmacmd@gmail.com Cc: toasters@teaparty.net Subject: Re: Failed Aggregate 0

________________________________ From: tmac tmacmd@gmail.com Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam

I Blog at TMACsRackhttps://tmacsrack.wordpress.com/

Christopher D. Chandler

10:32 p.m.

The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:31, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:

Christoper,

aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares? (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

From: chris@dhinnovations.commailto:chris@dhinnovations.com Sent: August 19, 2018 3:23 PM To: tmacmd@gmail.commailto:tmacmd@gmail.com Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: Re: Failed Aggregate 0

________________________________ From: tmac <tmacmd@gmail.commailto:tmacmd@gmail.com> Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam

I Blog at TMACsRackhttps://tmacsrack.wordpress.com/

Timothy Naple

10:29 p.m.

Chris,

It may have shutdown due to raid timeout if you did not replace the disks.

Just boot it back up and reassign the spares.

Tim

From: chris@dhinnovations.com Sent: August 19, 2018 3:27 PM To: tnaple@BERKCOM.com Cc: tmacmd@gmail.com; toasters@teaparty.net Subject: Re: Failed Aggregate 0

The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:31, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:

Christoper,

aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares? (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

________________________________ From: tmac <tmacmd@gmail.commailto:tmacmd@gmail.com> Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam

I Blog at TMACsRackhttps://tmacsrack.wordpress.com/

Christopher D. Chandler

10:35 p.m.

When I try to boot it panics and says it has no root volume.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:34, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:

Chris,

It may have shutdown due to raid timeout if you did not replace the disks.

Just boot it back up and reassign the spares.

Tim

From: chris@dhinnovations.commailto:chris@dhinnovations.com Sent: August 19, 2018 3:27 PM To: tnaple@BERKCOM.commailto:tnaple@BERKCOM.com Cc: tmacmd@gmail.commailto:tmacmd@gmail.com; toasters@teaparty.netmailto:toasters@teaparty.net Subject: Re: Failed Aggregate 0

The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:31, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:

Christoper,

aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares? (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

________________________________ From: tmac <tmacmd@gmail.commailto:tmacmd@gmail.com> Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam

I Blog at TMACsRackhttps://tmacsrack.wordpress.com/

Timothy Naple

10:31 p.m.

Ah maybe another disk failed after the aggr output you sent earlier. Boot then ctrl c for maintenance option 5 and then run aggr status -r.

Tim

From: chris@dhinnovations.com Sent: August 19, 2018 3:30 PM To: tnaple@BERKCOM.com Cc: tmacmd@gmail.com; toasters@teaparty.net Subject: Re: Failed Aggregate 0

When I try to boot it panics and says it has no root volume.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:34, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:

Chris,

It may have shutdown due to raid timeout if you did not replace the disks.

Just boot it back up and reassign the spares.

Tim

The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:31, Timothy Naple <tnaple@BERKCOM.commailto:tnaple@BERKCOM.com> wrote:

Christoper,

aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares? (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

________________________________ From: tmac <tmacmd@gmail.commailto:tmacmd@gmail.com> Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam

I Blog at TMACsRackhttps://tmacsrack.wordpress.com/

tmac

10:36 p.m.

boot to maintenance mode.

Then try "disk show -a" and then "sysconfig -r" or "aggr status -r" and "aggr status"

--tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*

*I Blog at TMACsRack https://tmacsrack.wordpress.com/*

On Sun, Aug 19, 2018 at 6:35 PM Christopher D. Chandler < chris@dhinnovations.com> wrote:

...

When I try to boot it panics and says it has no root volume.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:34, Timothy Naple tnaple@BERKCOM.com wrote:

Chris,

It may have shutdown due to raid timeout if you did not replace the disks.

Just boot it back up and reassign the spares.

Tim

*From:* chris@dhinnovations.com *Sent:* August 19, 2018 3:27 PM *To:* tnaple@BERKCOM.com *Cc:* tmacmd@gmail.com; toasters@teaparty.net *Subject:* Re: Failed Aggregate 0

The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:31, Timothy Naple tnaple@BERKCOM.com wrote:

Christoper,

aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares? (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

*From:* chris@dhinnovations.com *Sent:* August 19, 2018 3:23 PM *To:* tmacmd@gmail.com *Cc:* toasters@teaparty.net *Subject:* Re: Failed Aggregate 0
 Aggr State           Status                Options
      aggr0 online          raid_dp, aggr         root, diskroot,
nosnap=off, raidtype=raid_dp, degraded raidsize=16, raid_lost_write=on, 64-bit ignore_inconsistent=off, snapmirrored=off, rlw_on resyncsnaptime=60, fs_size_fixed=off,

lost_write_protect=on, no_delete_log=off, ha_policy=cfo, hybrid_enabled=off,

percent_snapshot_space=0%,

free_space_realloc=off, raid_cv=on, thorough_scrub=off Volumes: dcs_ds_01, dcs_iso, vol0 Plex /aggr0/plex0: online, normal, active RAID group /aggr0/plex0/rg0: double degraded, block checksums RAID group /aggr0/plex0/rg1: double degraded, block checksums RAID group /aggr0/plex0/rg2: normal, block checksums

*From:* tmac tmacmd@gmail.com *Sent:* Sunday, August 19, 2018 6:23:54 PM *To:* Christopher D. Chandler *Cc:* Toasters *Subject:* Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*

*I Blog at TMACsRack https://tmacsrack.wordpress.com/*

On Sun, Aug 19, 2018 at 6:21 PM dhichandler chris@dhinnovations.com wrote:

...
I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk failure in one of our raid groups and looking for help recovering. The unit is out of warranty and support. Any help is appreciated.

Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/ _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters

tmac

10:34 p.m.

Try sending us output of

"disk show -a"

--tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*

*I Blog at TMACsRack https://tmacsrack.wordpress.com/*

On Sun, Aug 19, 2018 at 6:32 PM Christopher D. Chandler < chris@dhinnovations.com> wrote:

...

The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.

Chris Chandler 919-274-7684

On Aug 19, 2018, at 18:31, Timothy Naple tnaple@BERKCOM.com wrote:

Christoper,

aggr0 is still online just double degraded. Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares? (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

*From:* chris@dhinnovations.com *Sent:* August 19, 2018 3:23 PM *To:* tmacmd@gmail.com *Cc:* toasters@teaparty.net *Subject:* Re: Failed Aggregate 0
 Aggr State           Status                Options
      aggr0 online          raid_dp, aggr         root, diskroot,
nosnap=off, raidtype=raid_dp, degraded raidsize=16, raid_lost_write=on, 64-bit ignore_inconsistent=off, snapmirrored=off, rlw_on resyncsnaptime=60, fs_size_fixed=off,

lost_write_protect=on, no_delete_log=off, ha_policy=cfo, hybrid_enabled=off,

percent_snapshot_space=0%,

free_space_realloc=off, raid_cv=on, thorough_scrub=off Volumes: dcs_ds_01, dcs_iso, vol0 Plex /aggr0/plex0: online, normal, active RAID group /aggr0/plex0/rg0: double degraded, block checksums RAID group /aggr0/plex0/rg1: double degraded, block checksums RAID group /aggr0/plex0/rg2: normal, block checksums

*From:* tmac tmacmd@gmail.com *Sent:* Sunday, August 19, 2018 6:23:54 PM *To:* Christopher D. Chandler *Cc:* Toasters *Subject:* Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*

*I Blog at TMACsRack https://tmacsrack.wordpress.com/*

On Sun, Aug 19, 2018 at 6:21 PM dhichandler chris@dhinnovations.com wrote:

...
I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk failure in one of our raid groups and looking for help recovering. The unit is out of warranty and support. Any help is appreciated.

Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/ _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters

tmac

10:28 p.m.

That aggr is online and degraded. You need to get yourself a replacement drive --tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*

*I Blog at TMACsRack https://tmacsrack.wordpress.com/*

On Sun, Aug 19, 2018 at 6:26 PM Christopher D. Chandler < chris@dhinnovations.com> wrote:

...

 Aggr State           Status                Options
      aggr0 online          raid_dp, aggr         root, diskroot,
nosnap=off, raidtype=raid_dp, degraded raidsize=16, raid_lost_write=on, 64-bit ignore_inconsistent=off, snapmirrored=off, rlw_on resyncsnaptime=60, fs_size_fixed=off,

lost_write_protect=on, no_delete_log=off, ha_policy=cfo, hybrid_enabled=off,

percent_snapshot_space=0%,

free_space_realloc=off, raid_cv=on, thorough_scrub=off Volumes: dcs_ds_01, dcs_iso, vol0 Plex /aggr0/plex0: online, normal, active RAID group /aggr0/plex0/rg0: double degraded, block checksums RAID group /aggr0/plex0/rg1: double degraded, block checksums RAID group /aggr0/plex0/rg2: normal, block checksums

*From:* tmac tmacmd@gmail.com *Sent:* Sunday, August 19, 2018 6:23:54 PM *To:* Christopher D. Chandler *Cc:* Toasters *Subject:* Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*

*I Blog at TMACsRack https://tmacsrack.wordpress.com/*

On Sun, Aug 19, 2018 at 6:21 PM dhichandler chris@dhinnovations.com wrote:

...
I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk failure in one of our raid groups and looking for help recovering. The unit is out of warranty and support. Any help is appreciated.

Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/ _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters

Christopher D. Chandler

10:27 p.m.

Here is the latest Autosupport before the unit faulted.

Chris

919-274-7684

________________________________ From: tmac tmacmd@gmail.com Sent: Sunday, August 19, 2018 6:23:54 PM To: Christopher D. Chandler Cc: Toasters Subject: Re: Failed Aggregate 0

You did not include many details. RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate. --tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeamhttps://twitter.com/NetAppATeam

I Blog at TMACsRackhttps://tmacsrack.wordpress.com/

dhichandler

10:25 p.m.

percent_snapshot_space=0%,

free_space_realloc=off, raid_cv=on, thorough_scrub=off

Volumes: dcs_ds_01, dcs_iso, vol0

Plex /aggr0/plex0: online, normal, active RAID group /aggr0/plex0/rg0: double degraded, block checksums RAID group /aggr0/plex0/rg1: double degraded, block checksums RAID group /aggr0/plex0/rg2: normal, block checksums

----- Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/

dhichandler

10:26 p.m.

percent_snapshot_space=0%,

free_space_realloc=off, raid_cv=on, thorough_scrub=off

Volumes: dcs_ds_01, dcs_iso, vol0

----- Christopher Chandler CEO DH Innovations, LLC -- Sent from: http://network-appliance-toasters.10978.n7.nabble.com/

2322

Age (days ago)

2322

Last active (days ago)

toasters@lists.teaparty.net

14 comments

4 participants

tags (0)

participants (4)

Christopher D. Chandler
dhichandler
Timothy Naple
tmac