The partner has six spares but the cluster is offline and the unit is sitting at the CFE prompt.

Chris Chandler

919-274-7684

On Aug 19, 2018, at 18:31, Timothy Naple <tnaple@BERKCOM.com> wrote:

Christoper,

aggr0 is still online just double degraded.  Looks like you just need to put some spares in there and let it rebuild.

Does the partner have any spares?  (Run 'aggr status -s' on the partner)

Or perhaps do you have any spares around or unassigned disks?

Tim

From: chris@dhinnovations.com Sent: August 19, 2018 3:23 PM To: tmacmd@gmail.com Cc: toasters@teaparty.net Subject: Re: Failed Aggregate 0

     Aggr State           Status                Options
          aggr0 online          raid_dp, aggr         root, diskroot, nosnap=off, raidtype=raid_dp,
                                degraded              raidsize=16, raid_lost_write=on,
                                64-bit                ignore_inconsistent=off, snapmirrored=off,
                                rlw_on                resyncsnaptime=60, fs_size_fixed=off,
                                                      lost_write_protect=on, no_delete_log=off,
                                                      ha_policy=cfo, hybrid_enabled=off,
                                                      percent_snapshot_space=0%,
                                                      free_space_realloc=off, raid_cv=on,
                                                      thorough_scrub=off

  Volumes: dcs_ds_01, dcs_iso, vol0

                Plex /aggr0/plex0: online, normal, active
                    RAID group /aggr0/plex0/rg0: double degraded, block checksums
                    RAID group /aggr0/plex0/rg1: double degraded, block checksums
                    RAID group /aggr0/plex0/rg2: normal, block checksums

---

From: tmac <tmacmd@gmail.com>
Sent: Sunday, August 19, 2018 6:23:54 PM
To: Christopher D. Chandler
Cc: Toasters
Subject: Re: Failed Aggregate 0

 

You did not include many details.

RAID 4 or RAID-DP? Sounds like you are using RAID4 if you have a double disk failure and you lost an aggregate.

--tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeam

I Blog at TMACsRack

On Sun, Aug 19, 2018 at 6:21 PM dhichandler <chris@dhinnovations.com> wrote:

I have a FAS3140 running OnTap 8.2.5 and I have had a double partity disk
failure in one of our raid groups and looking for help recovering. The unit
is out of warranty and support. Any help is appreciated.



-----
Christopher Chandler
CEO
DH Innovations, LLC
--
Sent from: http://network-appliance-toasters.10978.n7.nabble.com/
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters