toasters

toasters@lists.teaparty.net

13514 discussions

FYI: 220/330 NVRAM
by Bill Bradford 17 May '01

17 May '01

For those needing NVRAM for a 220, 330, etc - Dallas Semiconductor will give out 2 of any of its products as samples merely for filling out a form on their web site. Both myself and a friend did so and requested a DS2229-T (which is the NVRAM a 220/330 users), and got them about a week and a half later - boom, 4meg NVRAM. 8-) The page says that the "2 free" doesent apply to the "DS2229", but I sure have two DS2229-Ts sitting here in front of me.. Now to find some 2G narrow SE storageworks cannisters and disks.. Bill -- Bill Bradford mrbill(a)mrbill.net Austin, TX

1 0

Hardware Upgrade
by Honeycutt, Michael 16 May '01

16 May '01

Anyone upgraded to the new dual port fcal's yet? Looking for some info on what options/config changes would have to be made after the cards are installed. Should the filer just recognize that the cards are there and automatically set up the second loop? Anyone at NetApp with documentation that could be supplied would be appreciated. Thanks. Michael Honeycutt MCSE/A+ NT/Exchange Engineer IBM Global Services

1 0

RE: Migrating user directories from Server to Filer
by Edward Lee 16 May '01

16 May '01

Thanks for all your responses on this guys. -Eddie _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com

1 0

F740 cluster takeover question
by brynay_cradle 16 May '01

16 May '01

Hello , now , I have F740 cluster , run dataontap 6.1 ( NFS ) before takeover , filer1 and filer2 access ok , but when filer1 takeover filer2 I try access filer2 , but get permission deny , even access /home via admin host of filer2 anyone have see this problem ? Regards Cradle Technology Corp. Infrastructure Integration Department Bryan Yuan Tel: (886) 2 87682688 Ex: 634 bryany(a)cradle.com.tw

1 0

[Fwd: Archive Help]
by Peter Gauthier 16 May '01

16 May '01

Could any one tell me if the teaparty port 1999 is a TCP or UDP port. Also when our firewall does open it up this port, where does this URL actually live.

2 1

RE: Migrating user directories from Server to Filer
by Nail, Larry 15 May '01

15 May '01

Sorry, my fingers went for the send key too fast... at any rate, we've migrated many servers by changing their names at the time of the swap without any problems. -----Original Message----- From: Nail, Larry Sent: Tuesday, May 15, 2001 5:31 PM To: Edward Lee Cc: Toasters(a)mathworks.com Subject: RE: Migrating user directories from Server to Filer Edward Lee wrote: Hello all, My company just got a 740. We want to move the user's home directories off of an NT server and move it to the filer. I was wondering... After migrating the data, is there any way to keep from having to go in and changing the home directory path in the users NT accounts. I was thinking that creating a share on the filer with the same server name should do the trick-so it will just use the same UNC path. But I'm not sure if that will work. Thanks all, -Eddie

1 0

RE: Migrating user directories from Server to Filer
by Nail, Larry 15 May '01

15 May '01

Edward Lee wrote: Hello all, My company just got a 740. We want to move the user's home directories off of an NT server and move it to the filer. I was wondering... After migrating the data, is there any way to keep from having to go in and changing the home directory path in the users NT accounts. I was thinking that creating a share on the filer with the same server name should do the trick-so it will just use the same UNC path. But I'm not sure if that will work. Thanks all, -Eddie

1 0

Migrating user directories from Server to Filer
by Edward Lee 15 May '01

15 May '01

Hello all, My company just got a 740. We want to move the user's home directories off of an NT server and move it to the filer. I was wondering... After migrating the data, is there any way to keep from having to go in and changing the home directory path in the users NT accounts. I was thinking that creating a share on the filer with the same server name should do the trick-so it will just use the same UNC path. But I'm not sure if that will work. Thanks all, -Eddie _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com

2 1

RE: Migrating user directories from Server to Filer
by Fox, Adam 15 May '01

15 May '01

Just a couple of ideas. What is the path on the current NT server? If it's \\server_name\user_name, then you can use the cifs.home_dir option to make the filer automagically make that share work for everyone. If it is some other path like \\server_name\Users\user, then you can create a share called 'user' just like on your NT server. OR, if you don't want to alter the server_name part and you can take that NT server name out of production, you can make the name of the NT server a NETBIOS alias on the filer (look under options cifs, you'll find it) and then the filer will answer for the old server name as well as it's own. But again, this means that your old NT box will have to go out of production or have its name changed. Just a few ideas..hope this helps. -- Adam Fox NetApp Professional Services, NC adamfox(a)netapp.com > -----Original Message----- > From: Edward Lee [mailto:edwardlee60@hotmail.com] > Sent: Tuesday, May 15, 2001 2:43 PM > To: Toasters(a)mathworks.com > Subject: Migrating user directories from Server to Filer > > > Hello all, My company just got a 740. We want to move the > user's home > directories off of an NT server and move it to the filer. I was > wondering... After migrating the data, is there any way to > keep from having > to go in and changing the home directory path in the users NT > accounts. I > was thinking that creating a share on the filer with the same > server name > should do the trick-so it will just use the same UNC path. > But I'm not sure > if that will work. > > Thanks all, > > -Eddie > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com >

1 0

RE: Migrating user directories from Server to Filer
by Tom "Mad Dog" Yergeau 15 May '01

15 May '01

You can script the change for your users using the command net user <username> /domain /homedir:\\filer\username A key trick to using the cifs.homedirs feature is to make sure that the user's home directory matches the username exactly, and also the folder has to be all lowercase regardless of how the user's name actually looks. Tom -----Original Message----- From: Edward Lee [mailto:edwardlee60@hotmail.com] Sent: Tuesday, May 15, 2001 2:43 PM To: Toasters(a)mathworks.com Subject: Migrating user directories from Server to Filer Hello all, My company just got a 740. We want to move the user's home directories off of an NT server and move it to the filer. I was wondering... After migrating the data, is there any way to keep from having to go in and changing the home directory path in the users NT accounts. I was thinking that creating a share on the filer with the same server name should do the trick-so it will just use the same UNC path. But I'm not sure if that will work. Thanks all, -Eddie _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters