toasters

toasters@lists.teaparty.net

1 participants
13523 discussions

[Fwd: System Notification from mlswfsa (SHELF_FAULT!!!)]
by Dan OBrien 03 Jul '03

03 Jul '03

WARNING FILER NEWBIE in trouble... Help, what does this mean? -------- Original Message -------- Subject: System Notification from mlswfsa (SHELF_FAULT!!!) Tue Jul 1 10:37:59 EDT [emu_admin]: emu 5 reports no right fan. Tue Jul 1 10:37:59 EDT [statd]: *** NOTICE *** Fault reported on disk storage shelf attached to slot 7a. Please check fans, power and temperature. -------------------------------------- I visually inspected all the shelfs and there were no red lines on. All the fans were working. Both power supplies were lit green on each shelf. Which is emu 5? I halted the filer, power cycled everything, and it came back up. All seemed fine, but then I got this alert: Tue Jul 1 10:47:55 EDT [dyn_dev_qual_admin]: Downrev firmware on 1 disk Two months ago, I replaced a failing disk with a spare. I suspect this disk is my new hot spare. What can I do to fix this? Thanks in advance for any help you can lend me. Regards, Dan O'Brien, dmobrien(a)lcsi.net Cell: 614-783-4859 Work: 614-476-8473 Home: 740-927-2178 Pataskala, OH

2 1

CALL FOR HELP
by mhere_musa＠post.cz 02 Jul '03

02 Jul '03

Email: musamhere(a)email.com,, musamhere(a)hknetmail.com Contact phone number: +. 44 7763959056. Dear Friend, Difficulties encountered in efforts to establish a business abroad necessitate this search for someone to assist me in securing and investing the sum of USD50,000.000( fifty million dollars)inherited from my father's business reserve. I am the heir of a Zimbabwean family; my father was an agriculturist. He became rich from his old-aged investment in agriculture and later was victimized by President Robert Mugabe's land reform policy. He was assassinated by unknown gunmen for defending his land ownership and siding the minority white farmers. Before his death, my father foresaw the insecurity of both our lives and property then decided to deposit the above sum with a private finance and security firm in Europe. This money has become the only inherited property of our family since our home was burnt,and the farmlands and machines seized; yet the government and it's loyalists are bent on making life difficult for us. To summarise this traumatic story, my mother and I have decided to offer 20% of the above sum to anyone who assists us to secure this funds overseas or 30% share for possible help on investing in any reliable venture. there are however some minimal cost involved in securing the release of this deposit from the present holding company.i do not intend to overburden you with these cost.but you must know beforehand that we will be sharing whatever cost involved in retrieving this deposit and putting it to beneficial use. if you would want to proceed under these terms,please reply for detailed information. if you do not accept my offer,please in good fate treat with utmost confidentiality . A quick reply with your name,telephone and fax numbers for more confidential communication will be highly appreciated. Sincerely yours, Musa Mhere N/B: please if you need to speak to my mother, please feel free to ask for her as she will be willing to explain to you. -- Ziskejte kvalitu, kterou si zasluhujete. Za minimalni mesicni poplatek vam nabizime Antivir, Antispam nebo dalsi kapacitu pro vas Mailbox. Vice na: http://sluzby.volny.cz/product/postpaid/

1 0

blade servers to Filer
by Bui, Marcus 01 Jul '03

01 Jul '03

Hi Toasters, We are migrating many of the current servers to HP blade servers. The Server Team is considering connecting to the Filers/SAN on the back end for storage. I know this is not a problem. Some of the applications servers only need 4GB of space so leaving it on the DAS will be better. Want to best utilize the Filers since not every blade server is a good candidate for NAS if DAS will suffice. What are some criteria to use when considering connecting blade servers to the Filers? Any suggestion is appreciated. cheers, Marcus Bui

5 10

RE: blade servers to Filer
by Bui, Marcus 01 Jul '03

01 Jul '03

A few items to clarify: - The environment have both Filers (F880c, F820) and SAN (Sun,HDS). Filers running CIFS only. - All HP blade servers are Windows client. - Have not implemented or tested iSCSI. Probably not any time soon. - The blade servers will have mirrored drives, probably 36GB drives, with 9GB partition for OS. The rest can be Data to fully utilize the drive. - Most of the application residing on these servers are not disk I/O intensive. cheers, Marcus -----Original Message----- From: Bui, Marcus [mailto:Marcus.Bui@aiminvestments.com] Sent: Tuesday, July 01, 2003 11:11 AM To: 'toasters(a)mathworks.com' Subject: blade servers to Filer Hi Toasters, We are migrating many of the current servers to HP blade servers. The Server Team is considering connecting to the Filers/SAN on the back end for storage. I know this is not a problem. Some of the applications servers only need 4GB of space so leaving it on the DAS will be better. Want to best utilize the Filers since not every blade server is a good candidate for NAS if DAS will suffice. What are some criteria to use when considering connecting blade servers to the Filers? Any suggestion is appreciated. cheers, Marcus Bui

2 1

FDDI adapters in FAS900 filers?
by Francett, Robert D (SAIC) 01 Jul '03

01 Jul '03

Hello toasters, Has anyone used the FDDI network adapter X1105 (DEC3002) on a FAS940 or FAS960 filer? It is not approved according the the NOW site, but has anyone tried it? I have this card currently working, and supported, in F840 machines and plan to replace these with the 900 series. Considerable leverage is being applied to maintain this service. Thanks, Bob Francett

3 3

African American Business Directory ( e-chamber)
by Carylon Alexander 01 Jul '03

01 Jul '03

1 0

Fwd: Re: olderx1025A adapters
by Gabriel Ajidele 01 Jul '03

01 Jul '03

>From: "July @ Zerowait" <july(a)zerowait.com> >To: "Gabriel Ajidele" <gajidele(a)hotmail.com> >Subject: Re: olderx1025A adapters >Date: Tue, 1 Jul 2003 10:27:22 -0400 > >The NetApp X1025A was an Alteon Gigabit Ethernet Adapter. >Don't, whatever you do, mix Sun part numbers up with Netapp part numbers! > >----- Original Message ----- >From: "Gabriel Ajidele" <gajidele(a)hotmail.com> >To: <list(a)delusion.com>; <toasters(a)mathworks.com> >Sent: Tuesday, July 01, 2003 5:11 AM >Subject: Re: olderx1025A adapters > > > > Hi, > > > > There is an X1025A (FDDI/S SAS) offered by Sun Microsystems. See the >link > > below for details: > > > > >http://sunsolve.sun.com/handbook_pub/Devices/Communication/COMM_FDDI_S_SAS_… > > > > Gabriel. > > > > >From: "deanan" <list(a)delusion.com> > > >To: <toasters(a)mathworks.com> > > >Subject: olderx1025A adapters > > >Date: Mon, 30 Jun 2003 11:42:59 -0700 > > > > > > > > >Hello, > > > > > >I have some older X1025A gigbit adapters that I'd like > > >to repurpose. Does anyone know if they can be made to work > > >under linux or who made the original cards? > > > > > >Thanks, > > > > > >Deanan > > > > > > > _________________________________________________________________ > > The new MSN 8: advanced junk mail protection and 2 months FREE* > > http://join.msn.com/?page=features/junkmail > > > > > _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

1 0

Re: olderx1025A adapters
by Gabriel Ajidele 01 Jul '03

01 Jul '03

Hi, Pls note that the X1025A offered by Sun Microsystems is an SBus card... Gabriel. >From: "Gabriel Ajidele" <gajidele(a)hotmail.com> >To: list(a)delusion.com, toasters(a)mathworks.com >Subject: Re: olderx1025A adapters >Date: Tue, 01 Jul 2003 10:11:54 +0100 > >Hi, > >There is an X1025A (FDDI/S SAS) offered by Sun Microsystems. See the link >below for details: > >http://sunsolve.sun.com/handbook_pub/Devices/Communication/COMM_FDDI_S_SAS_… > >Gabriel. > >>From: "deanan" <list(a)delusion.com> >>To: <toasters(a)mathworks.com> >>Subject: olderx1025A adapters >>Date: Mon, 30 Jun 2003 11:42:59 -0700 >> >> >>Hello, >> >>I have some older X1025A gigbit adapters that I'd like >>to repurpose. Does anyone know if they can be made to work >>under linux or who made the original cards? >> >>Thanks, >> >>Deanan >> > >_________________________________________________________________ >The new MSN 8: advanced junk mail protection and 2 months FREE* >http://join.msn.com/?page=features/junkmail > _________________________________________________________________ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail

1 0

Re: olderx1025A adapters
by Gabriel Ajidele 01 Jul '03

01 Jul '03

Hi, There is an X1025A (FDDI/S SAS) offered by Sun Microsystems. See the link below for details: http://sunsolve.sun.com/handbook_pub/Devices/Communication/COMM_FDDI_S_SAS_… Gabriel. >From: "deanan" <list(a)delusion.com> >To: <toasters(a)mathworks.com> >Subject: olderx1025A adapters >Date: Mon, 30 Jun 2003 11:42:59 -0700 > > >Hello, > >I have some older X1025A gigbit adapters that I'd like >to repurpose. Does anyone know if they can be made to work >under linux or who made the original cards? > >Thanks, > >Deanan > _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail

1 0

How the heck do you get the lid of a C1100?
by Jaye Mathisen 30 Jun '03

30 Jun '03

Searched for a hardware guide for detailed stuff on the 1100, but didn't find anything other than the basic hardware install guide. I wan tto get inside this baby and take a look at it, but I can't figure out how to get the lid off. Something in the front/center seems to be holding it, but I'll be hornswoggled if I can find a screw or anything. Any tip appreciated. Thanks.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters