toasters

toasters@lists.teaparty.net

13514 discussions

RE: offline folder support?
by Michael Schipp 17 Jun '04

17 Jun '04

Yep! As far as your Windows 2000 Prof/XP machines think it is just another Windows box - we use it here with users syncing there home folders. Thank you, Michael A Schipp M.I.S Network Administrator ASI SOLUTIONS 8 Lord Street Botany NSW 2019 Phone: 02 9384 8000 Direct: 02 9384 8095 Email: mschipp(a)asi.com.au Web: http://www.asi.com.au <http://www.asi.com.au/> ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Brubaker, Paul Sent: Wednesday, 16 June 2004 1:12 AM To: list toasters Subject: offline folder support? Does anyone know if the Netapp / Ontap support offline folders (caching)... this is a microsoft windows 2000 and above feature (CIFS). We are running a FAS960 with Ontap 6.4.2 (soon to be Ontap 6.5.1). It appears not to be a supported feature; any plans Netapp will support it in the future? thanks! Paul Brubaker, Jr. RIDS - Intel System Support AT&T Wireless Services * office phone: 717-526-5011 * cell phone: 717-578-2254 * e-mail: paul.brubaker(a)attws.com

1 0

Turning off Logging output
by Robert Borowicz 16 Jun '04

16 Jun '04

Is there a way to temporarily turn off the logging output in a Telnet session? Too often I'm typing tedious commands and "BLAM" someone connects to a CIFS session and.... TIA -Rob {looking through the docs...}

2 1

PLEASE ADD ME TO YOUR MAILING LIST!!
by harbhajan julka 16 Jun '04

16 Jun '04

__________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

1 0

SOLUTION: RE: Enlarge a volume owned by a vfiler
by toaster＠chopel.de 16 Jun '04

16 Jun '04

Hi, here is the solution for my problem: Normally it is like Adam Fox and his colleague wrote. Just adding the disks to both sites and make a 'snapmirror update' on the destination. Finish! But, first look on the "primary" Volume if the option fs_size_fixed is set to "on" before adding the disks. I don't know why this options was set to "on", maybe once we tested to rotate the mirror. But turning the option off resolve our problem. Thanks to all, Michael Thorsten.Lemke(a)computacenter.com wrote : > As I understand you have two volumes called "Volume1" that are both in > snapmirrored state? One is a normal snapmirror and the other one is a DR > backup of the vfiler? > In this case you have to do the enlargement also on the original (third) > source volume which is not in snapmirrored state and therefore does not > have the fs_size_fixed set to "on". The size of the filesystem of > snapmirrored volumes will adapt to the source volume after the next > scheduled update as Adam pointed out earlier (of course you have to add the > same amount of space to each of them first). > > Regards, > Thorsten > > > > > > toaster(a)chopel.de>@mathworks.com > on 16.06.2004 11:22:11 > > Please respond to toaster(a)chopel.de> > > Sent by: owner-toasters(a)mathworks.com > > > To: "Fox, Adam" Adam.Fox(a)netapp.com>, > "Uehara; Tsuneyuki (Gen)" > tsuneyuki.uehara(a)gs.com>, > toasters(a)mathworks.com> > cc: > Subject: RE: Enlarge a volume owned by a vfiler > > > -------------------------------------------------------------------------- > > > > Hallo, > > maybe my initial situation was not clear: > > On the "main site" I spent VfilerA a new disk. > Volume1 before "vol add" : 201 GB > Volume1 after "vol add" : also 201 GB > > vol status -b Volume1: > Vol Size (blocks) FS Size (blocks) > ----------------- ---------------- > 76996480 61597184 > > The filer notified that "..the disk was successfully added to volume > Volume1" > IMHO this results because Volume1 is in "snapmirrored-state" > an the option "fs_size_fixed" is set "on". > > On the "desaster site" I spent VfilerA' (vfiler dr) also > a new disk for volume Volume1. Same results. > > I think I must break the mirror but is this possible > without side effects on VfilerA because he is in "vfiler dr" > > Thanks a lot > > Michael > > Fox, Adam Adam.Fox(a)netapp.com> > schrieb : > > > You don't need to do this. It looks like you are doing Volume > > SnapMirror. All you have to do is add the disks to both volumes. > > You won't see the change on the destination until the next update, > > then the destination will become the size of the source. > > > > -- Adam Fox > > GS Tools Developer > > adamfox(a)netapp.com > > > > > > > > -----Original Message----- > > From: Uehara, Tsuneyuki (Gen) [mailto:tsuneyuki.uehara@gs.com] > > Sent: Tuesday, June 15, 2004 7:23 AM > > To: 'toaster(a)chopel.de'; > > toasters(a)mathworks.com > > Subject: RE: Enlarge a volume owned by a vfiler > > > > > > We perform "snapmirror quiesce" then "snapmirror break" then turn off > > "fs_size_fixed". > > > > # Gen Uehara > > > > -----Original Message----- > > From: owner-toasters(a)mathworks.com > > [mailto:owner-toasters@mathworks.com] > > On > > Behalf Of toaster(a)chopel.de > > Sent: Tuesday, June 15, 2004 10:12 PM > > To: toasters(a)mathworks.com > > Subject: Enlarge a volume owned by a vfiler > > > > Hi, > > > > I have a problem to enlarge a volume owned by a "dr"-vfiler. > > > > Vfiler1 Vfiler1 (dr backup) > > |--> vol1 |-->vol1 > > > > It was possible to add a disk to vol1 on both sites. But I can't disable > the > > volume option "fixed fs_size", because vol1 is in "snapmirrored-state". > > > > How can I enlarge the volume without deleting the dr-filer? > > > > Thanks for help, > > > > Michael > > > > > > > > > > > > COMPUTACENTER (UK) LTD > > The contents of this e-mail are intended for the named addressee only. > It contains information which may be confidential and which may also be > privileged. > Unless you are the named addressee (or authorised to receive > for the addressee) you may not copy or use it, or disclose it to anyone > else. If you received it in error please notify us immediately and then > destroy it. > > Computacenter information is available from http://www.computacenter.com > > This footnote also confirms that this email message has been swept for the > presence of computer viruses. > > ***************************************************************************************************************************

1 0

NOTICE
by fromrodosky 16 Jun '04

16 Jun '04

J. RODOSKY AMKA. GREETINGS I AM CONTACTING YOU UNBEHALF OF MR.KHODORKOVSKY, FORMER BOSS OF YUKOS OIL, WHO IS PRESENTLY IN DETENTION FOR TAX EVASION AND FRAUD WHICH HAVE BEEN POLITICALLY MOTIVATED BY PRESIDENT PUTIN OF RUSSIA. JUST RECENTLY, THE TAX MINISTRY HAS WON A KEY COURT DECISION, REQUIRING YUKOS TO PAY AN EQUIVALENT OF $3.5 BN. IN BACK TAXES AND FINE TO THE GOVERNMENT. THIS IS A BATTLE MANY, BELIEVED TO BE BETWEEN THE WEALTHIEST VERSUS THE MOST POWERFUL IN RUSSIA.ALTHOUGH MR. KHODORKOVSKY HAS PERSONAL FORTUNE ESTIMATED AT $1.5BN,BUT CANNOT NOT AFFORD TO PRODUCE THAT SUM WITHOUT FILELING FOR BANKRUPCY OF YUKOS OIL AND OTHER PRIVATE INVESTMENT. HOWEVER, I AM CONTACTING YOU FOR A FAVOUR BASE ON ABSOLUTE CONFIDENCE AND SECRECY TO ASSIST US, BY ACTING AS A PARTNER TO RECEIVE AND ASSIST IN THE INVESTMENT OF A CERTAIN AMOUNT RUNNING INTO MILLIONS OF AMERICAN DOLLARS ON OUR BEHALF. THIS SUM ARISES AS THE ONLY PRIVATE UNOFFICIAL ACCOUNT OWNED BY HIM ,WHICH WAS NOT FROZEN, BECAUSE IT WAS NOT TO THE KNOWLEDGE OF THE AUTHORITY, AND SECONDLY THE TRANSACTION WAS NOT MADE WITH HIS NAME .IT IS THE ONLY HOPE OF SUSTAINING THE FAMILY, AFTER HE MUST HAVE BEEN RELEASED FROM PRISON. SINCE FILELING FOR BANKRUPCY REMAINS THE ONLY OPTION FOR HIM TO AVOID TEN YEARS JAIL TERMS, ACCORDING TO THE LAWYER. ON RECEIPT OF THIS MAIL,KINDLY SEND YOUR INTREST, TO THIS EMAIL ADDRESS, SO THAT WE CAN START NEGOTIATION, IT WILL ALSO BE BETTER IF YOU CAN FORWARD YOUR PHONE AND FAX NUMBER FOR BETTER AND QUICK COMMUNICATION. I WILL BRIEF YOU WITH MORE DETAILS IN ACKNOWLEDGEMENT OF YOUR RESPONSE. YOURS SINCERELY, MR. J. RODOSKY AMKA.

1 0

Usable space on a R200/SAN
by Eric sarraf 16 Jun '04

16 Jun '04

Hi, I am considering a R200 - 16TB for a SAN environment. We would like to get 12TB usable without going to the next config which is 24TB. I calculated the usable space as follows: 2 disks for default volume 1 parity disk 3 volumes with 14 drives (12 data, 2 parity) 1 volume with 11 drives (9 data, 2 parity) This gives me a total of 45 data disks. Knowing that each 320GB disk is formatted to 274GB, and considering the 10% WAFL, I get 11.1TB usable 274 * 45 * .9 = 11.1 1. Can I create larger RAID sizes by changing the RAIDsize option on R200 from 14 to 18? 2. Is it possible to change the single parity raidsize from 7 to 13? 3. According to block admin guide, with NO snapshots, volume has to be 10% larger than the total LUN size. It this is a must? I am able to create LUNs that are the same size as the volume. 4. Is it possible to combine default def. volume with other data volumes? Thanks,

1 0

RE: Turning off Logging output
by Thorsten.Lemke＠computacenter.com 16 Jun '04

16 Jun '04

That is right. With "ctrl-r" you can bring back the line that you were about to type when the logging messages got you. Regards, Thorsten jeff.mery@ni.com@mathworks.com on 16.06.2004 16:01:30 Sent by: owner-toasters(a)mathworks.com To: Dirk.Schmiedt(a)munich.netsurf.de, rbaus(a)swbell.net cc: toasters(a)mathworks.com Subject: RE: Turning off Logging output -------------------------------------------------------------------------- There is also a ctrl-key command that will bring whatever you were typing to the current command line (like up-arrow in bash or Windows). Would someone from NetApp enlighten us on this one? Our SE showed me once, but I've slept since then =). Jeff Mery, MCP National Instruments ------------------------------------------------------------------- "Allow me to extol the virtues of the Net Fairy, and of all the fantastic dorks that make the nice packets go from here to there. Amen." TB - Penny Arcade ------------------------------------------------------------------- -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Dirk.Schmiedt(a)munich.netsurf.de Sent: Wednesday, June 16, 2004 3:51 PM To: rbaus(a)swbell.net Cc: toasters(a)mathworks.com Subject: Re: Turning off Logging output Robert Borowicz wrote: > Is there a way to temporarily turn off the logging output in a Telnet > session? > > Too often I'm typing tedious commands and "BLAM" someone connects to a > CIFS session and.... Change the /etc/syslog.conf and reduce the level of severity or disable the messaging of some services completely. There is a man page about this config file and there is a template file named /etc/syslog_conf_template (or so ...). Copy this template file to /etc/syslog.conf and edit it you will see the wished result. b.t.w. The "syslog(d)", "syslog.conf" man pages at ONTAP are in my humble opinion not the best. Have a look at the syslog.conf man page of any other unix derivate. It might help you more. :-) Just my 2 cents. Smile & regards! Dirk COMPUTACENTER (UK) LTD The contents of this e-mail are intended for the named addressee only. It contains information which may be confidential and which may also be privileged. Unless you are the named addressee (or authorised to receive for the addressee) you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it. Computacenter information is available from http://www.computacenter.com This footnote also confirms that this email message has been swept for the presence of computer viruses. ***************************************************************************************************************************

1 0

Re: Turning off Logging output
by Thorsten.Lemke＠computacenter.com 16 Jun '04

16 Jun '04

I don't know if you can stop the whole logging output. But regarding the cifs sessions you can turn off the option cifs.trace_login. I guess that this alone will help a lot. Regards, Thorsten Robert Borowicz <rbaus(a)swbell.net>@mathworks.com on 16.06.2004 15:21:56 Sent by: owner-toasters(a)mathworks.com To: toasters(a)mathworks.com cc: Subject: Turning off Logging output -------------------------------------------------------------------------- Is there a way to temporarily turn off the logging output in a Telnet session? Too often I'm typing tedious commands and "BLAM" someone connects to a CIFS session and.... TIA -Rob {looking through the docs...} COMPUTACENTER (UK) LTD The contents of this e-mail are intended for the named addressee only. It contains information which may be confidential and which may also be privileged. Unless you are the named addressee (or authorised to receive for the addressee) you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it. Computacenter information is available from http://www.computacenter.com This footnote also confirms that this email message has been swept for the presence of computer viruses. ***************************************************************************************************************************

1 0

RE: Turning off Logging output
by Traitel, Eyal 16 Jun '04

16 Jun '04

Hi ! You can play with /etc/syslog.conf or specifically for your issue - "options cifs.trace_login off". Eyal. _____ From: Robert Borowicz [mailto:rbaus@swbell.net] Sent: Wednesday, June 16, 2004 3:22 PM To: toasters(a)mathworks.com Subject: Turning off Logging output Is there a way to temporarily turn off the logging output in a Telnet session? Too often I'm typing tedious commands and "BLAM" someone connects to a CIFS session and.... TIA -Rob {looking through the docs...}

1 0

RE: Enlarge a volume owned by a vfiler
by Thorsten.Lemke＠computacenter.com 16 Jun '04

16 Jun '04

As I understand you have two volumes called "Volume1" that are both in snapmirrored state? One is a normal snapmirror and the other one is a DR backup of the vfiler? In this case you have to do the enlargement also on the original (third) source volume which is not in snapmirrored state and therefore does not have the fs_size_fixed set to "on". The size of the filesystem of snapmirrored volumes will adapt to the source volume after the next scheduled update as Adam pointed out earlier (of course you have to add the same amount of space to each of them first). Regards, Thorsten <toaster(a)chopel.de>@mathworks.com on 16.06.2004 11:22:11 Please respond to <toaster(a)chopel.de> Sent by: owner-toasters(a)mathworks.com To: "Fox, Adam" <Adam.Fox(a)netapp.com>, "Uehara; Tsuneyuki (Gen)" <tsuneyuki.uehara(a)gs.com>, <toasters(a)mathworks.com> cc: Subject: RE: Enlarge a volume owned by a vfiler -------------------------------------------------------------------------- Hallo, maybe my initial situation was not clear: On the "main site" I spent VfilerA a new disk. Volume1 before "vol add" : 201 GB Volume1 after "vol add" : also 201 GB vol status -b Volume1: Vol Size (blocks) FS Size (blocks) ----------------- ---------------- 76996480 61597184 The filer notified that "..the disk was successfully added to volume Volume1" IMHO this results because Volume1 is in "snapmirrored-state" an the option "fs_size_fixed" is set "on". On the "desaster site" I spent VfilerA' (vfiler dr) also a new disk for volume Volume1. Same results. I think I must break the mirror but is this possible without side effects on VfilerA because he is in "vfiler dr" Thanks a lot Michael Fox, Adam <Adam.Fox(a)netapp.com> schrieb : > You don't need to do this. It looks like you are doing Volume > SnapMirror. All you have to do is add the disks to both volumes. > You won't see the change on the destination until the next update, > then the destination will become the size of the source. > > -- Adam Fox > GS Tools Developer > adamfox(a)netapp.com > > > > -----Original Message----- > From: Uehara, Tsuneyuki (Gen) [mailto:tsuneyuki.uehara@gs.com] > Sent: Tuesday, June 15, 2004 7:23 AM > To: 'toaster(a)chopel.de'; > toasters(a)mathworks.com > Subject: RE: Enlarge a volume owned by a vfiler > > > We perform "snapmirror quiesce" then "snapmirror break" then turn off > "fs_size_fixed". > > # Gen Uehara > > -----Original Message----- > From: owner-toasters(a)mathworks.com > [mailto:owner-toasters@mathworks.com] > On > Behalf Of toaster(a)chopel.de > Sent: Tuesday, June 15, 2004 10:12 PM > To: toasters(a)mathworks.com > Subject: Enlarge a volume owned by a vfiler > > Hi, > > I have a problem to enlarge a volume owned by a "dr"-vfiler. > > Vfiler1 Vfiler1 (dr backup) > |--> vol1 |-->vol1 > > It was possible to add a disk to vol1 on both sites. But I can't disable the > volume option "fixed fs_size", because vol1 is in "snapmirrored-state". > > How can I enlarge the volume without deleting the dr-filer? > > Thanks for help, > > Michael COMPUTACENTER (UK) LTD The contents of this e-mail are intended for the named addressee only. It contains information which may be confidential and which may also be privileged. Unless you are the named addressee (or authorised to receive for the addressee) you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it. Computacenter information is available from http://www.computacenter.com This footnote also confirms that this email message has been swept for the presence of computer viruses. ***************************************************************************************************************************

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters