toasters

toasters@lists.teaparty.net

2 participants
13529 discussions

RE: moving a flex vol to a new aggr ?
by Glenn Dekhayser 20 Jun '06

20 Jun '06

What I would have imagined is something like VMWare's Vmotion, which moves an entire system from one physical system to another. Since the aggregates are on the same system, we wouldn't have the issue of snapmirror making a 'new' volume. The process would be as such: 1) Make baseline copy to new volume on new aggregate with separate name (snapshot will suffice); 2) Do a once/min snapshot until lag < 60 sec. 3) Change to a semi-sync snapmirror 4) Change to a sync mirror 5) Once in sync, in the OS 'swap' the handles for the primary and mirror volumes (since they are in effect the same data now) so that data is now served from the mirror. 6) Once swap is complete, break the mirror and (optionally) remove the old volume. I think this is what everyone wants! Heck, combine this with FlexShare and you've got automatic load balancing! Glenn (the other one) -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of George, Andrew Sent: Monday, June 19, 2006 8:00 PM To: John Clear; Fox, Adam; Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? Err...I would have thought syncmirror would have been the way to go in that case I'd rather manually move the connections anyway rather than rely on an automated process And I'd especially not like to see the old copy getting deleted before I've had a chance to make sure the customers are happy -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of John Clear Sent: Tuesday, 20 June 2006 9:06 AM To: Fox, Adam; Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? What I'd like to see is a way to move a live volume between aggregates. This would be especially useful on my R200s, since the aggregates and volumes are quite large. Ideally, something like 'vol move volname aggr0 aggr1' would move the volume without any interruptions on the client side. My understanding is that vol copy takes a snapshot, and then transfers that, which means any changes that occur after the copy is started are not transferred. The only way around that is to make sure the volume isn't mounted/accessed, which is often an unacceptable amount of down time. Between snapmirror and vol clone/copy, the code to do this appears to be mostly there already. The only piece missing is doing the live cutover between the old volume and new volume. John -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Fox, Adam Sent: Monday, June 19, 2006 8:43 AM To: Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? Perhaps the toaster community could better define what you want from a proposed vol move command that you aren't getting currently from vol copy? -- Adam Fox adamfox(a)netapp.com -----Original Message----- From: Carl Howell [mailto:chowell@uwf.edu] Sent: Monday, June 19, 2006 9:35 AM To: Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? I would like to see a move operation added to the vol command. Does anyone know if this will ever be available? Thanks, - Carl -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Greg Wilson Sent: Thursday, June 15, 2006 12:23 AM To: toasters(a)mathworks.com Subject: moving a flex vol to a new aggr ? hey all i need to move a flex vol from one aggregate to another aggregate on the same filer is there a really simple command like vol move <volname> aggr1 aggr2 if not what would be the easiest way to move the flex vol to a new aggregate? vol copy ? thanks gw -- Greg Wilson Senior System Administrator greg.wilson(a)aapt.com.au

1 0

RE: moving a flex vol to a new aggr ?
by George, Andrew 20 Jun '06

20 Jun '06

Err...I would have thought syncmirror would have been the way to go in that case I'd rather manually move the connections anyway rather than rely on an automated process And I'd especially not like to see the old copy getting deleted before I've had a chance to make sure the customers are happy -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of John Clear Sent: Tuesday, 20 June 2006 9:06 AM To: Fox, Adam; Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? What I'd like to see is a way to move a live volume between aggregates. This would be especially useful on my R200s, since the aggregates and volumes are quite large. Ideally, something like 'vol move volname aggr0 aggr1' would move the volume without any interruptions on the client side. My understanding is that vol copy takes a snapshot, and then transfers that, which means any changes that occur after the copy is started are not transferred. The only way around that is to make sure the volume isn't mounted/accessed, which is often an unacceptable amount of down time. Between snapmirror and vol clone/copy, the code to do this appears to be mostly there already. The only piece missing is doing the live cutover between the old volume and new volume. John -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Fox, Adam Sent: Monday, June 19, 2006 8:43 AM To: Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? Perhaps the toaster community could better define what you want from a proposed vol move command that you aren't getting currently from vol copy? -- Adam Fox adamfox(a)netapp.com -----Original Message----- From: Carl Howell [mailto:chowell@uwf.edu] Sent: Monday, June 19, 2006 9:35 AM To: Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? I would like to see a move operation added to the vol command. Does anyone know if this will ever be available? Thanks, - Carl -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Greg Wilson Sent: Thursday, June 15, 2006 12:23 AM To: toasters(a)mathworks.com Subject: moving a flex vol to a new aggr ? hey all i need to move a flex vol from one aggregate to another aggregate on the same filer is there a really simple command like vol move <volname> aggr1 aggr2 if not what would be the easiest way to move the flex vol to a new aggregate? vol copy ? thanks gw -- Greg Wilson Senior System Administrator greg.wilson(a)aapt.com.au

1 0

RE: moving a flex vol to a new aggr ?
by John Clear 20 Jun '06

20 Jun '06

What I'd like to see is a way to move a live volume between aggregates. This would be especially useful on my R200s, since the aggregates and volumes are quite large. Ideally, something like 'vol move volname aggr0 aggr1' would move the volume without any interruptions on the client side. My understanding is that vol copy takes a snapshot, and then transfers that, which means any changes that occur after the copy is started are not transferred. The only way around that is to make sure the volume isn't mounted/accessed, which is often an unacceptable amount of down time. Between snapmirror and vol clone/copy, the code to do this appears to be mostly there already. The only piece missing is doing the live cutover between the old volume and new volume. John -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Fox, Adam Sent: Monday, June 19, 2006 8:43 AM To: Carl Howell; Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? Perhaps the toaster community could better define what you want from a proposed vol move command that you aren't getting currently from vol copy? -- Adam Fox adamfox(a)netapp.com -----Original Message----- From: Carl Howell [mailto:chowell@uwf.edu] Sent: Monday, June 19, 2006 9:35 AM To: Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? I would like to see a move operation added to the vol command. Does anyone know if this will ever be available? Thanks, - Carl -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Greg Wilson Sent: Thursday, June 15, 2006 12:23 AM To: toasters(a)mathworks.com Subject: moving a flex vol to a new aggr ? hey all i need to move a flex vol from one aggregate to another aggregate on the same filer is there a really simple command like vol move <volname> aggr1 aggr2 if not what would be the easiest way to move the flex vol to a new aggregate? vol copy ? thanks gw -- Greg Wilson Senior System Administrator greg.wilson(a)aapt.com.au

2 1

Message could not be delivered
by Mail Delivery Subsystem 19 Jun '06

19 Jun '06

Virus warning from BT Business This message contained a computer virus which has been detected and deleted by the BT Business Email Virus Filter to avoid infecting your computer. You may wish to contact the sender of this email requesting they remove any virus infection from their PC before re-sending the email and attachment to you, virus-free. Attachment: mathworks.com.zip Problem: virus infected W32/MyDoom-O Action taken: deleted Any original message will appear as an attachment; if this is blank or absent no text was supplied. !�i��eF��z�]��:�H�V�Т)�_Vtɷ.�P�~>��氋 �f�o�֑B�s7�&F�&ҢQA5��ܢ��|滿��r�{wz�|�A�ƚ��l1٣��5��3>绊� �ǳ��!Z�4��#p��_c�1�Fq�.|�_��փ��]�1c�:�{ NŖP�\�Ю8Pޓ䴏[��|a�8g2y��⫵#�y��Q��bC�f�ѻ��S�0��tZ!Vj��eV�A-�"H��3_�>%V9��q��a��}�t�1�|V�񯭯��]��_��oY� !�� {i�˾��qG#b�3��$��v<��j�r�2 euN�,z��J�#Gi��}3�� x-olfEk'�Q\#^��K��n�r��M�,�8e(_��S�jX�?��̷�/��Ş�-(�>ܕ��%��mQ�J� (��N��ܙ !X^F>� Wv��Kʮ)��<1,�txB��h��a�[P�ъ�m3�p;�P 1H73�ޏν��a6�'��_�l#0��#v��{�O�y��;�EM��a��\P�և�A��T��-�џ��4�V��[ �lǏ�8&�� 9Q��6||Ӂ�Dd:�*�6��u#�2,�N�Kv��̱ 3��A0xI�Ь>SS�d��̾��$h첥TO0��p�۴��\x��6��bǹ%�W��fEZ��/�eB| P ��;Ut��o�/��K��/X�Nv�YZ<SǁN�Z`0`jl�m�c�.�T��͐#x o; 3 �q��A�5]�L�VOyp�O��ny�slj-�? ��{S5�� n1�蘟�n��Y�j��gB ��\N�v3��e�n�d��q�7n>$J�Qa��<�x�|�LZ �G��FEl?ء��"��_��eNV�X��_.Δ��L��O�SS �&�X7�z��4�< ��.�� Π!�t�X;��[֙1��P�V 5p[�u�)�f��: �B�h�QJj"��o��3_ϑg��!#9}s��: 0�l(l�<��f�)�S�I>�"�S?� ��6�̮��}��SC}�{!.��U��k�V�D߱pϤ��fQ J��첼�Q��x�ß�:��&t豚*ኞ߼��%ѽ&X O<jKByF ��7Y��&>�{�oF�aJvO�u~_�Dg,u�cSr-h�[��& �Pj�X%e"� b6D��L�/q��'%�E��6N��锸E��J��Z��(��P�웭n:�v�o͕��N��V�S�A�|�1x�i,I)� ��q��Z �ćQ2�f0U��7�-yu��~�ѷ"�ݳ��zsNq)~�)��n \��ueΚ%�˰-�S�<�KtϽC��u��!�-t,�o�}Fv��*8�ڴ�Uqc:��H��֖��ك��YPjq4Ts�Y�� `|\�" �v,c'�Q��yS W�8��}��J��Ze$�F&�Q몖jF�� n�%<��;�6J�11��3�E��a.��1gJ��*�$`Za*��`�%>��!bu�zaI7�'�9�T*e��h��zM�K�ݰ�W��)L�b�G�︂�y��?X7��:� Pf#�_��wZB,��l��B��b�4;𯊪g�ޠ ��B1%�#�oh �(-0\��Ը�~�&[t��Z1)�m#��k��D��HY>\r��`��{F��|�^ �u��!y�p�<��aC��j��/M_�\�J�E^��pck��"�LA�0J��sg�I��)��4U��x��r��f��?�5�n5�ۖ}ՠ��l��>��c��2?H/��{��g/��H��_��,(�a1e��P��r(��^��h��ҕJ�ݥ�;��vd�9�u�uplrd�GY(��E��<�iF�U�;��5,Y��P:�Nۃf�n��lOP��$-I��h�� g�߿��{EGoH7MnN�� ^;��E��Xmv��ߓC0Қ凋 �c9Ɨ�2�ͷ\k�a�c�[�f�)�h��%�iH��x6�o��f��HEX��r��t�vx��p�1��>�yFI-7,�*�刣*�R��ơ�C��宋7��;XB�*B��x��g�L�z��^3��R�q��?�3�9 ��`�e�0%��I��?�K�1�.p&��C�A}�la�"��r� ��W}'m��ἄ�V��Y��σ�k|�r��P�J�?��Sح��~�Te��d$ �Y֖��Sx��7��`��'.f��Jn��㎧�l��B�x7�%��"L��%o��6��Ӧ��h��uE��8��E�K��}�(�ɋp�ѩ9k��v(��A�"{n bC2d��k�"_��B�5�"�l��>�A�L�ӮEɤ��Ȏa$R�a�9��uc�KÌZ�k<�Nf U��dAԞ�`��?�zVc �9έ�f��#�ɖ��Wٵ�� M�j�%�:��&��m�n1�O��Ƙ��h�(.a�%ݟ��ےoO��&�usTNh�%L ��oF�ܿ*/�. ��F��,�sUݕsB6!.((�g(��t��A��^q �:U��3>��캎�z��*C�D?��7`��͜}a��t_J��&�z��/g��]��Y͹"�h�s��rm�C}��C�$O�p;zC ��8 %�v�4�h��9McS��0�Ŭ��%b��O7!�{�bWAۥ3㫆C��.��SM�8�{��>Y]Y��{��p�^�-K��X�6��غu�H��ist߬��"��s󝅘�j� 5�k<�N�P��w��U�}�jj�t*��Z��G7B��x��U�0�o��֭о��]��:2۽{��*bU��8�� wf//y5��XcL�q�x�{��Yϝ|{X��,�s�s��瞚~�;�ߪ�H�>�GQ�Һ�� Virus warning from BT Business This message contained a computer virus which has been detected and removed by the BT Business Email Virus Filter to avoid infecting your computer. You may wish to contact the sender of this email requesting they remove any virus infection from their PC before re-sending the email and any attachment to you, virus-free. Infected attachment: Attachment: mathworks.com.zip Problem: virus infected W32/MyDoom-O Action taken: deleted

1 0

RE: moving a flex vol to a new aggr ?
by Fox, Adam 19 Jun '06

19 Jun '06

Perhaps the toaster community could better define what you want from a proposed vol move command that you aren't getting currently from vol copy? -- Adam Fox adamfox(a)netapp.com -----Original Message----- From: Carl Howell [mailto:chowell@uwf.edu] Sent: Monday, June 19, 2006 9:35 AM To: Greg Wilson Cc: toasters(a)mathworks.com Subject: RE: moving a flex vol to a new aggr ? I would like to see a move operation added to the vol command. Does anyone know if this will ever be available? Thanks, - Carl -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Greg Wilson Sent: Thursday, June 15, 2006 12:23 AM To: toasters(a)mathworks.com Subject: moving a flex vol to a new aggr ? hey all i need to move a flex vol from one aggregate to another aggregate on the same filer is there a really simple command like vol move <volname> aggr1 aggr2 if not what would be the easiest way to move the flex vol to a new aggregate? vol copy ? thanks gw -- Greg Wilson Senior System Administrator greg.wilson(a)aapt.com.au

1 0

RE: NetApp Simulator Limitations
by Johnson, James A 19 Jun '06

19 Jun '06

THDS INFORMATION TECHNOLOGY NETWORK OPERATIONS CENTER Thank you all for your inout on this. James A Johnson Operations Specialist Network Operations Center The Home Depot Supply Division B2B / MRO Distribution 866-306-NOCC 858-831-2471 Direct 858-831-2210 NOC 858-831-2221 Fax ________________________________ From: Cope, Michael [mailto:Michael.Cope@netapp.com] Sent: Wednesday, June 14, 2006 8:01 AM To: Johnson, James A Subject: RE: NetApp Simulator Limitations Mostly the limitations are the person using it. I've heard of people using VMWare and the sim to set up clusters and run Snapmirror between the virtual filers. The only limitation I know of would be the CFE commands and disk space. I'd be surprised if you could manage more than a couple terabytes - depending on which version of Windoze you run it on. Michael Cope NetApp Professional Services Engineer <mailto:8582042400@vtext.com> mcope(a)NetApp.com <mailto:mcope@NetApp.com> Cell: (858) 204-2400 txt msg: 8582042400(a)vtext.com <mailto:8582042400@vtext.com> Simplifying Data Storage Management ________________________________ From: Johnson, James A [mailto:James_A_Johnson@homedepot.com] Sent: Wednesday, June 14, 2006 7:02 AM To: toasters(a)mathworks.com Subject: NetApp Simulator Limitations Does anyone know what limitations the NetApp simulator has? I know it looks and feels like a real filer, but there has to be some limitation, right? Thanks, James -- this email delivered by hermoth

1 0

RE: moving a flex vol to a new aggr ?
by Carl Howell 19 Jun '06

19 Jun '06

I would like to see a move operation added to the vol command. Does anyone know if this will ever be available? Thanks, - Carl -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Greg Wilson Sent: Thursday, June 15, 2006 12:23 AM To: toasters(a)mathworks.com Subject: moving a flex vol to a new aggr ? hey all i need to move a flex vol from one aggregate to another aggregate on the same filer is there a really simple command like vol move <volname> aggr1 aggr2 if not what would be the easiest way to move the flex vol to a new aggregate? vol copy ? thanks gw -- Greg Wilson Senior System Administrator greg.wilson(a)aapt.com.au

1 0

TRANSFER OF FUND FOR INVESTMENT
by GEORGE CAREW 19 Jun '06

19 Jun '06

Dear Respectfully, My intention of writing to you now is for any important thing that will creat a benefitable thing to you and your entire family, upon your willingness to be honest and faithful to me. Before going further with my details, I will first introduce myself to you as George Carew, son of Late Major General Brigadier Tom Carew from Sierra Leone who was appointed as Chief of Defence Staff for the Government of Sierra Leone and an important figure in the Sierra Leonean Army on December 1st, 2003 before his death after he reassigned from duty. My purpose of writing to you is that, I want to have a joint business investment with you in your country because I done want to invest the money in my country Sierra Leone for security purposes. I inherited US$16.7 Million which my late father deposited in one of the African bank in Ivory Coast, being where I'm staying now. Please, check within yourself very well before responding, if you will be able to handle this big amount of money, to enable me furnish you with details because I done want anything that will bring mistake in the investment. If you are ready to work with me, reply immediately with your direct telephone number, so that I will call you to enable us discuss on the phone. Please reply me back with this E-mail adderss below george22carew(a)yahoo.com I will be looking forward to hear back from you. Regards, George Carew.

1 0

TRANSFER OF FUND FOR INVESTMENT
by GEORGE CAREW 19 Jun '06

19 Jun '06

1 0

Virus warning from BT Business
by BT.Business.Email.Virus.Filter＠btbroadbandoffice.com 19 Jun '06

19 Jun '06

** Please note: this is an automatically generated email. Please do not reply. ** - -The email, detailed below, that you recently sent contained a computer virus which has been made safe by the BT Business Email Virus Filter - -The treated email has been sent to the intended recipient without any risk of their computer being infected. - -Please use the following link for advice on how to disinfect your computer : - - - -http://www.btbroadbandoffice.com/help/email/outgoingviruswarning - - - -Message details: - - - -To: whitestone(a)btconnect.com -Date: 06/19/06 09:05:21 -Attachment: whitestone(a)btconnect.com.zip -Virus: W32/MyDoom-O -Action taken: deleted ""

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters