toasters

toasters@lists.teaparty.net

13531 discussions

Delivery Status Notification (Failure)
by postmaster＠hetnet.nl 24 Jun '06

24 Jun '06

This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed. aartdina(a)hetnet.nl

1 0

Mail System Error - Returned Mail
by Mail Administrator 24 Jun '06

24 Jun '06

This Message was undeliverable due to the following reason: Your message was not delivered because the destination computer refused to accept it (the error message is reproduced below). This type of error is usually due to a mis-configured account or mail delivery system on the destination computer; however, it could be caused by your message since some mail systems refuse messages with invalid header information, or if they are too large. Your message was rejected by mx1.tpgi.com.au for the following reason: 5.6.1 One or more viruses were detected in this message. To prevent further infections, TPG will not allow relaying of messages that contains a virus. Details: infected:Email-Worm.Win32.Mydoom.m The following recipients did not receive this message: <adamas(a)tpg.com.au> Please reply to <Postmaster(a)mx.bigpond.com> if you feel this message to be in error. The following attachments have been removed from the bounce message: tpg.com.au

1 0

Partner With Us!
by briggsosborne＠virgilio.it 23 Jun '06

23 Jun '06

Dear Friend, My name is Osborne Briggs, an attorney. My client need a partner to assist him in investing the a fund he deposited with a finance firm before he left his office on political Asylum. He would like to have your assistance so that these money can be invested in your care on any profitable investment with your assistance as a partner. This is why I contacted you;If you have a profitable idea where these fund can be invested and if you are willing to assist my client please get back to me soon with your ideas,so I can give you details before we proceed Thanks. Osborne Briggs

1 0

Value too large for defined data type
by David Lee 23 Jun '06

23 Jun '06

We administer our filers from a Solaris 8 machine: this is where the home directories (on the NetApp) for new users are created, and from where they are removed for old users. Occasionally removal of the home directory and its contents partially fails: Value too large for defined data type An "ls -lR" on the residual directory gives similar "Value too large ..." message for the residual files that the "rm ..." has been unable to remove. I cannot find a definitive statement about this, but I recall (and strongly suspect) something to do with a timestamp (ctime, mtime, atime etc.) having some sort of integer sign-bit wrap-around issue (and that if _were_ able to display it, the result would typically have a year in the big-band 1940s era...) And that NFS (from our Solaris 8 admin machine) has trouble with such things. Is this likely to be the problem? If so, are there any recommended solutions (or paths to investigate)? Thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

3 3

Intro
by JONATHAN R. LLOYD 23 Jun '06

23 Jun '06

Equatorial Guinea’s president Teodoro Obiang Nguema Mbasogo and his government deposited up to $700 million in U.S.’ Riggs Bank. A U.S. Senate subcommittee’s 2004 investigation criticized Riggs for failing to report potential money laundering in the Equatorial Guinea accounts. It also outlined examples of how Riggs allowed Obiang to make cash deposits and withdrawals from accounts he controlled personally. Riggs, which was acquired by PNC last year, later agreed to pay a $16 million fine for failing to report these and other suspicious transactions. Equatorial Guinea’s embassy insists the money, which was released back to the country, belongs to the government. "Attributing that money to President Obiang’s personal wealth is like saying a person who runs a hospital is worth the amount of revenue the hospital generates," the embassy spokesperson wrote in an e-mail. A half dozen other sources disagree. "They may say it is the country’s money, but the president does control everything," says Arvind Ganesan, a director at Human Rights Watch who has studied how the Equatorial Guinea government uses its oil revenue, "Under Obiang, the country's wealth is basically a presidential ATM." So they say. Now that this report has been made public, the President has decided that some deposits made with particular banks in Europe be diverted so as to retain them, therefore, I want to inform you that by virtue of my position as a special duties coordinator to the President of Equatorial Guinea Teodoro Obiang Nguema Mbasogo, I have the honour of nominating and appointing you as a front. All we need or require of you is your cooperation, that is you make available a business name we could incorporate and present to complete this contract. Making available also three names of the company directors. All other details will be made known on receipt of your response. We assume you will understand the responsibilities, the confidentiality and of course the trust bestowed on you as a result of this project. I know this is unexpected but I have come to know that the best things in life come unexpected. You alone are privy to this information by virtue of my nominating and appointing you. Please, do get back to me as soon as possible for details. Thank you. Jonathan R. Lloyd. For Special Duties.

1 0

RE: Read Only access to filer
by Flank, Joshua 22 Jun '06

22 Jun '06

Stephen, The audit role is ill-conceived since the capability login-http-admin gives full access to the filer via filerview. This is fixed in bug 167183, but it's not available to customers at this time. In ONTAP 7.0 and 7.1, roles are limited primarily to the command line. There's a workaround for the apis (if you use the SDK, I can help there), but nothing is available for FV. Given the limitations, instead of looking for read-only access, I'd recommend you decide which cli commands to give to which administrator. You can do this by creating your own role for a list of commands. The following will allow a user to run any cifs commands via telnet or rsh. No Filerview, and no permissions to halt the filer or change volumes: useradmin role add RoleCifs -a login-telnet,login-rsh,cli-help*,cli-cifs* useradmin group add GroupCifs -r RoleCifs useradmin user add UserCifs -g GroupCifs Good luck, -Joshua -----Original Message----- From: Holland, William L [mailto:HollandWL@state.gov] Sent: Thursday, June 22, 2006 2:21 AM To: Darragh, Stephen J (CSC) (US SSA); toasters(a)mathworks.com Subject: RE: Read Only access to filer Not for Filerview - always full admin rights if you are allowed to use Filerview. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Darragh, Stephen J (CSC) (US SSA) Sent: Wednesday, June 21, 2006 2:52 PM To: toasters(a)mathworks.com Subject: Read Only access to filer Is there a way to create a account on the filer that has read-only access? I tried useradmin user add myuser and added him to audit group. I could still change things like quotas from filerview, but could not login via cli Thanks Stephen

1 0

RE: Read Only access to filer
by Holland, William L 22 Jun '06

22 Jun '06

Not for Filerview - always full admin rights if you are allowed to use Filerview. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Darragh, Stephen J (CSC) (US SSA) Sent: Wednesday, June 21, 2006 2:52 PM To: toasters(a)mathworks.com Subject: Read Only access to filer Is there a way to create a account on the filer that has read-only access? I tried useradmin user add myuser and added him to audit group. I could still change things like quotas from filerview, but could not login via cli Thanks Stephen

2 1

RE: "Remove or update those downrev disks" Errors
by Kenneth Heal 22 Jun '06

22 Jun '06

Hi Juliansysconfig -v should give you a bit more information about what these drives are and what firmware release they have on them. http://now.netapp.com/NOW/download/tools/diskfw/ is a list of the latest firmware for various NetApp drives, and if I look there I see that NA13 is indeed the latest firmware for the ST318203FC.I would try visiting http://now.netapp.com/NOW/download/tools/diskqual/ and installing the latest disk qualification file -- this is basically a table of what disks the filer accepts. Beyond this it would probably be worth getting us a copy of sysconfig -v; I would check that the shelf contains all the same disks. Finally it is possible that a reboot will fix it, so I would probably try that. cheers, Kenneth > From: julian.grunnell(a)pipex.net> To: toasters(a)mathworks.com> Subject: "Remove or update those downrev disks" Errors> Date: Thu, 22 Jun 2006 08:23:11 +0100> > Hi - hoping someone can advise me with some errors I'm seeing on a NetApp> F740 I've recently started looking after. I don't really know any of the> history of the filer other than that OnTap 6.5.6 has recently been> installed.> > NetApp F740> Ontap 6.5.6> 3 fully populated disk shelves> > In the messages file it constantly reports:> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.41 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.42 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.43 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.48 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.49 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.50 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.51 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.52 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.53 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.56 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** Disk 3.40 has downrev firmware.> Please update it.> Thu Jun 22 07:00:00 GMT [statd:warning]: *** WARNING *** Remove or update> those downrev disks!!> Thu Jun 22 07:00:00 GMT [monitor.downRevDisks:warning]: Downrev disks still> present!!> > This is for a total of 8 disks out of 3 shelves. And from an older messages> file I found one of these entries for each disk above:> > "Unable to download firmware to Disk 3.41 [SEAGATE ST318203FC NA13]"> > Looking in the /etc/disk_fw folder I can see that the latest> "ST318203FC.NA13.LOD" firmware file is there and the NetApp documentation> states that for OnTap 6.1 and later, disk drive firmware is automatically> updated during bootup or when a disk is added to the system.> > Any help would be appreciated before I go rebooting, trying to update> manually ... if that's possible as in earlier versions etc. or trying> anything else.> > Thanks in advance - Julian.> > Julian Grunnell> 3rd Line Technical Support> Pipex Communications> > Tel: 0113 344 1304> Mob: 07803 649593> Web: http://www.pipex.com/> > This e-mail is subject to: http://www.pipex.net/disclaimer.html> > _________________________________________________________________ Try Live.com - your fast, personalized homepage with all the things you care about in one place. http://www.live.com/getstarted

1 0

RE: Value too large for defined data type
by Cope, Michael 22 Jun '06

22 Jun '06

I've seen this many times myself as a former Unix Sysadmin working in a mixed Solaris, Linux, Windows and Mac environment. Solaris can't see any dates previous to the epoch (1972?) Linux (at least RedHat) can see timestamps back to the year 1900 so NFS mounting to a linux workstation was how I managed to fix date-timestamps. Michael Cope NetApp Professional Services Engineer mcope(a)NetApp.com Cell: (858) 204-2400 txt msg: 8582042400(a)vtext.com Simplifying Data Storage Management -----Original Message----- From: David Lee [mailto:t.d.lee@durham.ac.uk] Sent: Wednesday, June 21, 2006 9:08 AM To: toasters(a)mathworks.com Subject: Value too large for defined data type We administer our filers from a Solaris 8 machine: this is where the home directories (on the NetApp) for new users are created, and from where they are removed for old users. Occasionally removal of the home directory and its contents partially fails: Value too large for defined data type An "ls -lR" on the residual directory gives similar "Value too large ..." message for the residual files that the "rm ..." has been unable to remove. I cannot find a definitive statement about this, but I recall (and strongly suspect) something to do with a timestamp (ctime, mtime, atime etc.) having some sort of integer sign-bit wrap-around issue (and that if _were_ able to display it, the result would typically have a year in the big-band 1940s era...) And that NFS (from our Solaris 8 admin machine) has trouble with such things. Is this likely to be the problem? If so, are there any recommended solutions (or paths to investigate)? Thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

4 4

[MailServer Notification]Security Notification
by Administrator＠mathworks.com 22 Jun '06

22 Jun '06

WORM_NETSKY.DAM has been detected,and Replace has been taken on 22/06/2006 10.44.05.

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters