toasters

toasters@lists.teaparty.net

3 participants
13514 discussions

Mail System Error - Returned Mail
by Mail Administrator 17 Jul '06

17 Jul '06

This Message was undeliverable due to the following reason: Each of the following recipients was rejected by a remote mail server. The reasons given by the server are included to help you determine why each recipient was rejected. Recipient: <skcowles(a)proaxis.com> Reason: <skcowles(a)proaxis.com>: User unknown in virtual alias table Please reply to <Postmaster(a)mx.bigpond.com> if you feel this message to be in error. The following attachments have been removed from the bounce message: skcowles(a)proaxis.com.zip

1 0

RE: Defragmenation Question on Filer after few GB deletion.
by margesimpson＠hushmail.com 17 Jul '06

17 Jul '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Stephen, Glenn & Michael, Thank you all. Great responses. Appreciate your help. Thank you all for your replies. Marge. -----BEGIN PGP SIGNATURE----- Note: This signature can be verified at https://www.hushtools.com/verify Version: Hush 2.5 wpwEAQECAAYFAkS63t8ACgkQ/YDITMxtgxw2OQQAmfE+elm/QsZZ6LJJ0+X1XU6yRPcq ZYrxsftwyRj/7v2QLUiAgX0EykQyIi9cW48+y8ok7OAVDCl7dJIRGlUyLISGSk0bagpL i+BlOqoJq0Ilv5eB3JXYr0rlMpE7ap28xYKp+9Ngc0RCCkQGrLI18sbm6LaijUyi1KBU Lz7Uxi8= =GDRu -----END PGP SIGNATURE----- Concerned about your privacy? Instantly send FREE secure email, no account required http://www.hushmail.com/send?l=480 Get the best prices on SSL certificates from Hushmail https://www.hushssl.com?l=485

1 0

Warning: could not send message for past 1 day
by Mail Delivery Subsystem 16 Jul '06

16 Jul '06

********************************************** ** THIS IS A WARNING MESSAGE ONLY ** ** YOU DO NOT NEED TO RESEND YOUR MESSAGE ** ********************************************** The original message was received at Sat, 15 Jul 2006 13:56:22 +0200 from ip-83-134-130-210.dsl.scarlet.be [83.134.130.210] ----- The following addresses had transient non-fatal errors ----- <pfafstallery(a)lycosmail.co.uk> ----- Transcript of session follows ----- <pfafstallery(a)lycosmail.co.uk>... Deferred: Connection timed out with lycosmail.co.uk. Warning: message still undelivered after 1 day Will keep trying until message is 4 days old

1 0

Order Now - The DaVinci Code DVD SPECIAL OFFER
by amazon＠service.com 16 Jul '06

16 Jul '06

1 0

Blueyonder anti-virus notification - [Infected Attachment]
by anti-virus＠blueyonder.co.uk 15 Jul '06

15 Jul '06

Dear Customer, The blueyonder anti-virus system found a virus in this message which it was unable to clean and all infected attachments have been deleted. This is an automated message - PLEASE DO NOT REPLY TO THIS MESSAGE AS THIS MAILBOX IS NOT MONITORED. For further online security information and advice on what steps you can take to make your computer even safer please visit our help site: http://www.blueyonder.co.uk/security "blueyonder does not guarantee that the remaining attachments are safe to open. You may want to run attachments through your own virus software before opening" ---------------------- From: MAILER-DAEMON(a)mathworks.com To: toasters(a)mathworks.com Sent On: 15/07/06 23:54:19 file.zip(application/octet-stream) infected Email-Worm.Win32.Mydoom.m ----------------------

1 0

Finalised At Last
by itebe_kolako1＠virgilio.it 15 Jul '06

15 Jul '06

My dear friend I am happy to inform you about my success in getting the funds transferred under the co-operation of a new associate from Spain. presently I am in Paraguay for investment projects with my own share of the sum. While waiting, I did not forget your last effort and attempts to help me in transfering these funds despite that it failed some how but at least God answered my prayers at the end. Contact my lawyer in Spain, his name is Mr. Carlos Jose Luis, his email is carlosjoseluis(a)consultant.com. Ask him to send to you the sum of $400.000 USD (FOUR HUNDRED THOUSAND US DOLLARS) that was banked there in your favour as compensation for all the last efforts and attempts to help me in this transaction.Contacts my lawyer with all the necessary information to make the transfer.We can now share the joy after all the pain we went through together. I am very occupied at present here in Paraguay because of the projects and investment that I and the new associate are currently executing. My lawyer had already been instructed on what to do only just contact him and he will put everything in proper place. I will contact you soonest Itebe Kolako

1 0

Blueyonder anti-virus notification - [Infected Attachment]
by anti-virus＠blueyonder.co.uk 15 Jul '06

15 Jul '06

Dear Customer, The blueyonder anti-virus system found a virus in this message which it was unable to clean and all infected attachments have been deleted. This is an automated message - PLEASE DO NOT REPLY TO THIS MESSAGE AS THIS MAILBOX IS NOT MONITORED. For further online security information and advice on what steps you can take to make your computer even safer please visit our help site: http://www.blueyonder.co.uk/security "blueyonder does not guarantee that the remaining attachments are safe to open. You may want to run attachments through your own virus software before opening" ---------------------- From: database(a)shopping.com To: toasters(a)mathworks.com Sent On: 15/07/06 08:33:22 toasters(a)mathworks.com.zip(application/octet-stream) infected Email-Worm.Win32.Mydoom.m ----------------------

1 0

Re: 3050 on board cards, please explain
by Linux Admin 14 Jul '06

14 Jul '06

Thanks to a lot of people who responded: Adam, Skottie, Blake. In regards to 4 FC on board FC cards if I have a 3050 cluter system: don't I use all 4 for disk shelves connectivity: 2 locally, 2 partner? does it not leave me without tape/san ports? Thanks On 7/14/06, Skottie Miller <skottie(a)anim.dreamworks.com> wrote: > > > > Linux Admin wrote: > > Skottie, > > Thanks for fast response. > > So that I understand correctly > > 4 copper gigE on board: data service only! (management is separate?) > > data or management. > > There is also a serial port console you can hook (we use > cyclades terminal servers) and a RLM remote management > port that uses a LAN (we have a physicially seperate management > LAN). the RLM is very cool, you can do remote power on/off, > lots of out-of-band control and console redirection. > > > 4 SFP based 2G fiberchannel on-board: 2 have to sacrificed for disk > > shelf's? > > and 2 can be used for tape san? > > if you have a cluster, you need a minimum of two disk FC ports. > one for the primary, and one for the failover partner. > > Depending on performance needs and the number of shelves, > you may want to use more FC for disk shelves. > > If you need more ports, install some x2050 FC adapters in > the PCI cage for the disks, and use the on-board for > the initiator ports. > > also, depending on the speed of your tape drives, and > how many, one should be plenty to feed tape devices for > backup. > > -skottie > > > > On 7/14/06, *Skottie Miller* <skottie(a)anim.dreamworks.com > > <mailto:skottie@anim.dreamworks.com>> wrote: > > > > > > 4 copper gigE on board. > > 4 SFP based 2G fiberchannel on-board, > > so they can be copper or fiber. > > > > lots of empty PCI slots for other expansion cards. > > > > the FC ports can connect to disk or tape > > be used as target adapters if you serve FCP, > > they a san. > > > > the on-board FC ports are faster; NetApp recommends > > that (if you serve SAN) that you use the on-board > > ports for that, and use some x2050 2-port FC adapters > > to connect the disk shelves. > > > > -skottie > > > > Linux Admin wrote: > > > Can someone please explain to me the break down of on board cards > > in 3050 > > > according to the specs there are 4 gigE on board ports: are they > > copper > > > or fiber? > > > can all of them be used for data? > > > What about FC ports? The 2 bellow, are they used for disk shelf > > > connectivity or they can be used for san/tape connections? > > > > > > > > > *Onboard 2Gb Fibre Channel Ports* (configurable as > Storage-attached > > > initiator or Host-attached target) > > > > > > > > > 4 > > > > > > > > > > -- > > > > Scott Miller > > skottie(a)anim.DreamWorks.com <mailto:skottie@anim.DreamWorks.com> > > > > > > -- > > Scott Miller > skottie(a)anim.DreamWorks.com >

2 1

3050 on board cards, please explain
by Linux Admin 14 Jul '06

14 Jul '06

Can someone please explain to me the break down of on board cards in 3050 according to the specs there are 4 gigE on board ports: are they copper or fiber? can all of them be used for data? What about FC ports? The 2 bellow, are they used for disk shelf connectivity or they can be used for san/tape connections? *Onboard 2Gb Fibre Channel Ports* (configurable as Storage-attached initiator or Host-attached target) 4

2 2

RE: 3050 on board cards, please explain
by Fox, Adam 14 Jul '06

14 Jul '06

The 4 on-board GigEs are Copper. If you need Fibre, expansion cards are available. The 4 2-Gb FC ports are LC and are programmable to be initiators or targets. As initiators, they can be used for disk shelves or tape SAN. As targets, the can be used for disk SAN. Of course, you'd need an FCP license to use them as targets. -- Adam Fox adamfox(a)netapp.com _____ From: Linux Admin [mailto:sysadmin.linux@gmail.com] Sent: Friday, July 14, 2006 1:32 PM To: NetApp Toasters List Subject: 3050 on board cards, please explain Can someone please explain to me the break down of on board cards in 3050 according to the specs there are 4 gigE on board ports: are they copper or fiber? can all of them be used for data? What about FC ports? The 2 bellow, are they used for disk shelf connectivity or they can be used for san/tape connections? Onboard 2Gb Fibre Channel Ports (configurable as Storage-attached initiator or Host-attached target) 4

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters