toasters

toasters@lists.teaparty.net

13520 discussions

RE: Tape Directly connected
by Kenneth Heal 07 Jun '07

07 Jun '07

Hi LuisYes, you should be able to directed attach a fibre channel tape drive:http://now.netapp.com/NOW/knowledge/docs/ontap/rel722/html/filer/f200… order to know if your tape device is supported you can check the system configuration guide at this URL:http://now.netapp.com/NOW/knowledge/docs/hardware/NetApp/syscfg/scdot72… your tape drive is not listed there take a look athttp://now.netapp.com/NOW/knowledge/docs/ontap/rel722_vs/html/ontap/tapeb… you might very will still be able to use it.Hope this helps!Kindest regardsKennethKenneth HealSenior Storage ConsultantSenet Eindhoven bv> Date: Thu, 7 Jun 2007 11:48:22 -0400> From: lsanchez(a)isc.cl> To: toasters(a)mathworks.com> Subject: Tape Directly connected> > Hi> > I don't have experience with SAN.> > My question is:> > Can I connect directly a SAN tape with a FAS270c, without the use of a > SAN switch between them?> > Thanks> > Luis _________________________________________________________________ With Windows Live Hotmail, you can personalize your inbox with your favorite color. www.windowslive-hotmail.com/learnmore/personalize.html?locale=en-us&ocid=TX…

2 1

LTO4 usage?
by Darren Dunham 06 Jun '07

06 Jun '07

I did some searching and I couldn't find any information about LTO4 support in OnTAP. I'm just doing some investigation on some possible drive purchases. Before I call netapp, has anyone else checked to find when LTO4 support might be expected? Anyone using LTO4 with OnTAP today? Thanks. -- Darren Dunham ddunham(a)taos.com Senior Technical Consultant TAOS http://www.taos.com/ Got some Dr Pepper? San Francisco, CA bay area < This line left intentionally blank to confuse you. >

1 0

RE: cifs terminate username?
by Jain, Ankur 06 Jun '07

06 Jun '07

David, The "ONTAPI" referred in the mail below is actually Manage ONTAP SDK product. Manage ONTAP SDK provide set of interfaces for developing third party integrations to manage NetApp storage. The SDK provide interfaces in C, Java and Perl languages. SDK can manage NetApp storage running ONTAP 6.3 and above. Manage ONTAP SDK is currently used by numerous partners and customers to tightly integrate into their own tools and applications with NetApp storage systems. The SDK can be downloaded from SDK portal( http://now.netapp.com/cgi-bin/manageontap ). The access to this portal is restricted. NetApp customers can request access to SDK through their NetApp sales representative. Thanks, Ankur -----Original Message----- From: David Lee [mailto:t.d.lee@durham.ac.uk] Sent: Tuesday, June 05, 2007 7:38 PM To: Paul Rosham Cc: toasters(a)mathworks.com Subject: RE: cifs terminate username? On Tue, 5 Jun 2007, Paul Rosham wrote: > Perhaps you could try and swap your scripting to the XML-based ONTAPI, > which would allow much better machine parseability? That sounds interesting. Until your email I had never heard of 'ONTAPI'. A quick Google search showed a few hits, but no obvious authoritative source of either specification or tutorial. How long has it been in ONTAP? (We are 7.0.5) How does one start, from zero, to investigate this thing called 'ONTAPI'? Documentation? Examples? Support software/modules for 'perl' (or shell, or similar)? Thanks in advance. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : UNIX Team Leader Durham University : : South Road : : http://www.dur.ac.uk/t.d.lee/ Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

1 0

cifs terminate username?
by David Lee 05 Jun '07

05 Jun '07

(OnTap 7.0.5) From time to time our admin procedures mean that we have to move someone's home directory from one qtree to another. (I'd rather this didn't happen, but it's one of those things we have to live with for the time being...) Inevitably, on some occasions a CIFS session for such a user is active at the time of the move. So if, the morning after the move, they simply pick up from where they left off the previous evening, their new data is still going into their old area. (This probably happens one every week or two on average.) What we're looking for is something like: cifs terminate username that we could employ to kill off the CIFS session(s) for a given username. (Such killing of potentially active (usually dormant) sessions is (while not ideal) nevertheless usually far preferable to picking up the pieces of two diverging home directories in the following days.) But there doesn't seem to be any such "cifs terminate username". There is a "cifs sessions username", whose output is intended for humans, not machines, so is not easily amenable to reliable machine-parsing. So it is not really suitable for then reliably deriving workstation names for OnTap's existing "cifs terminate workstation" command. Any thoughts on how to achieve "cifs terminate username" functionality? By the way, the environment for driving this is a set of UNIX scripts which can do operations of the form: rsh filer cifs ... -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : UNIX Team Leader Durham University : : South Road : : http://www.dur.ac.uk/t.d.lee/ Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

3 3

RE: cifs terminate username?
by David Lee 05 Jun '07

05 Jun '07

On Tue, 5 Jun 2007, Paul Rosham wrote: > Perhaps you could try and swap your scripting to the XML-based ONTAPI, which > would allow much better machine parseability? That sounds interesting. Until your email I had never heard of 'ONTAPI'. A quick Google search showed a few hits, but no obvious authoritative source of either specification or tutorial. How long has it been in ONTAP? (We are 7.0.5) How does one start, from zero, to investigate this thing called 'ONTAPI'? Documentation? Examples? Support software/modules for 'perl' (or shell, or similar)? Thanks in advance. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : UNIX Team Leader Durham University : : South Road : : http://www.dur.ac.uk/t.d.lee/ Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

2 1

Clustered heads with SATA disk shelves?
by Tom Samplonius 04 Jun '07

04 Jun '07

One item that I've researching that is a bit unclear, is that, can I can connect a SATA disk shelf (DS14mk2 AT) to a clustered set of FAS960 heads? I think there is no problem. I assume that you must use the AT-FCx modules, as they are dual-looped. I suspect that the the AT-FCx is mandatory for clustering (as opposed to the AT-FC) , but NOW seems a bit vague, at least according to what I was able to find. Also, I've heard rumors that connecting SATA shelves to a cluster is not really reliable. I was a bit taken a back, as NetApp as the SATA shelves have been out for a while. Is this really the case? Tom

7 9

Dual-domain CIFS
by Nils Vogels 30 May '07

30 May '07

Hi, In a cluster, since there are two heads, it is possible to make each head member of a different domain for CIFS. Will this cause problems during failover? Greets, Nils -- Simple guidelines to happiness: Work like you don't need the money, Love like your heart has never been broken and Dance like no one can see you.

2 1

R200 AT-FC2/FCX
by Carl Howell 30 May '07

30 May '07

We currently have an R200 with six AT-FC2 shelves. We want to add three AT-FCX shelves. Currently, we only have two loops and the AT-FC2's are spread across both of them. Should I move all of the AT-FC2's onto one loop and put the AT-FCX shelves on the other loop or just add the AT-FCX's to the current loops? Thanks, --Carl

5 4

Re: ndmpcopy for Linux
by Sandeep Cariapa 27 May '07

27 May '07

Hi, I was able to build it on RHEL4, running kernel 2.6.9-42.EL. Grab the bits from here: http://www.ndmp.org/download/ndmpcopy The mods I made to get it to build were only in 2 files: ./src/Makefile 37c37 < LIBS = -L$(LIBDIR) -lndmp -lsocket -lnsl --- > #LIBS = -L$(LIBDIR) -lndmp -lsocket -lnsl 39c39 < #LIBS = -L$(LIBDIR) -lndmp --- > LIBS = -L$(LIBDIR) -lndmp ./lib/ndmp_common.h 40c40 < #define XDR_AND_SIZE(func) (bool_t(*)(XDR*, ...))xdr_##func##,sizeof(func) --- > #define XDR_AND_SIZE(func) (bool_t(*)(XDR*, ...))xdr_##func ,sizeof(func) I did not run any exhaustive tests after I built it, but hopefully this will at least get you started. Cheers, Sandeep Cariapa Sales Engineer, IBRIX http://www.ibrix.com =============================================== Augie Schwer wrote: Has anyone built ndmpcopy for Linux recently? The Solaris version doesn't seem to build anymore and the ndmp.org web site does not look very active anymore.

2 1

Max number of LUNs
by Robert Lazzurs 27 May '07

27 May '07

Hello, In relation to the recent threads on max inodes and max dir size I was wondering if anyone has any experience with the limit on the number of LUNs in a filer? Kind regards,

2 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters