toasters

toasters@lists.teaparty.net

1 participants
13532 discussions

Re: Quick question about "LUN protocol type"
by David Lee Lambert 15 Dec '08

15 Dec '08

No, when I say a "DOS partition table" I mean what I get by running the program "/sbin/fdisk" under Linux, and subsequently doing e.g. mke2fs -L APPDATA -j /dev/sde1 instead of just doing mke2fs -L APPDAT -j /dev/sde On Monday 15 December 2008 11:19:48 am Webster, Stetson wrote: > Question: Is DOS directly interfacing with the lun? Do you have SAN device > drivers for DOS? > -----Original Message----- > From: David Lee Lambert [mailto:dlambert@bmtcarhaul.com] > Subject: Quick question about "LUN protocol type" > > In the FilerView LUN wizard, I see the following options for "LUN protocol > type": > [...] > > If we're making a LUN with a DOS partition table and one partiton that will > be used by a Linux host, should we use the "Windows" or "Linux" setting? > Or does it matter? -- David L. Lambert Software Developer, Precision Motor Transport Group, LLC Work phone 517-349-3011 x223 Cell phone 586-873-8813

1 0

Quick question about "LUN protocol type"
by David Lee Lambert 15 Dec '08

15 Dec '08

In the FilerView LUN wizard, I see the following options for "LUN protocol type": Solaris Windows - "The LUN will be used to store a raw disk device in a single-partition Windows disk" HP-UX AIX Linux - "The LUN will be used to store a Linux raw disk with no partition table" NetWare VMware The "na_snap" manpage also lists the types "windows_gpt" and "vld". If we're making a LUN with a DOS partition table and one partiton that will be used by a Linux host, should we use the "Windows" or "Linux" setting? Or does it matter? -- David L. Lambert Yahoo! IM: davidleelambert ** MSN IM: lamber45(a)cse.msu.edu

1 0

RE: qtree "top" tool
by Glenn Walker 14 Dec '08

14 Dec '08

All good points. That said, when I said 'write tool' and 'cifs top' I was thinking more interactive on the CLI of the actual filer to spot check stuff. I could have all of the talent in the world and not be able to produce this without getting it checked into the ONTAP code ;) Perhaps I will un-lazy myself when I get free time and give a client script version of this a whirl. Glenn -----Original Message----- From: Jeff Mohler [mailto:speedtoys.racing@gmail.com] Sent: Friday, December 12, 2008 10:37 PM To: Glenn Walker Cc: Todd C. Merrill; Nicholas Bernstein; Toasters Subject: Re: qtree "top" tool Netapp -could- write a lot of things. But there'd always be the "It'd be nice if..." But..then they'd be paying script writers instead of engineers by the lot, and the CLI and ZAPI are pretty open and available. But if I had any talent at all to script anything, Id be doing something like this too, perhaps. On Fri, Dec 12, 2008 at 7:25 PM, Glenn Walker <ggwalker(a)mindspring.com> wrote: > This is a good point. > > Using the perfstat tool will give you some running incrementals (it > zeroes for each iteration), but I think you want more of a tool like > cifs top, no? I don't see why NetApp couldn't easily write something > like this, and it would be a good tool to have: sysstat only goes so > far. > > Glenn > > -----Original Message----- > From: Todd C. Merrill [mailto:tmerrill@mathworks.com] > Sent: Friday, December 12, 2008 2:25 PM > To: Glenn Walker > Cc: Nicholas Bernstein; Toasters > Subject: RE: qtree "top" tool > > > Yes, I know about `qtree stats`. But, just like nfsstat, > it gives you cumulative stats. > > The NFS top tool I mentioned does an incremental nfsstat. > I'm looking for the same--*incremental* qtree stats, > in order to debug high usage as it is happening. > > > On Wed, 10 Dec 2008, Glenn Walker wrote: > >> You mean qtree stats? >> >> It shows CIFS and NFS ops per qtree - doesn't work at the vol level >> (wish it would). >> >> Glenn >> >> -----Original Message----- >> From: owner-toasters(a)mathworks.com > [mailto:owner-toasters@mathworks.com] >> On Behalf Of Nicholas Bernstein >> Sent: Wednesday, December 10, 2008 1:00 PM >> To: Toasters >> Subject: Re: qtree "top" tool >> >> I don't have a filer in front of me to test, but isn't there a stats >> show >> qtree? >> >> >> On 12/9/08 6:16 PM, "Todd C. Merrill" <tmerrill(a)mathworks.com> wrote: >> >> > Folks, >> > Before I write one myself or modify the NFS top tool >> > on the NOW toolchest: >> > >> > http://now.netapp.com/NOW/download/tools/ntaptop/ >> > >> > does anybody have an equivalent one for `qtree stats`? >> > >> > >> > Until next time... >> > >> > The MathWorks, Inc. 508-647-7000 x7792 >> > 3 Apple Hill Drive, Natick, MA 01760-2098 508-647-7001 FAX >> > tmerrill(a)mathworks.com http://www.mathworks.com >> > --- >> > >> >> -- >> Nicholas Bernstein >> Technologist, Consultant, Instructor >> http://nicholasbernstein.com >> >> >> >> > > > Until next time... > > The MathWorks, Inc. 508-647-7000 x7792 > 3 Apple Hill Drive, Natick, MA 01760-2098 508-647-7001 FAX > tmerrill(a)mathworks.com http://www.mathworks.com > --- > > >

1 0

do toaster need a day off? (WAFL scans)
by Todd C. Merrill 13 Dec '08

13 Dec '08

Two scenarios: 1. R200, 7.2.2, two 12 TB aggregates, 85 volumes of various sizes, 70-80% full snapvault secondary, ALWAYS receiving snapvaults and nearly ALWAYS spinning to tape. 2. 6070, 7.2.4, two 8 TB aggregates, 27 volumes between 150 and 700 GB, 60-70% full recent migration (via volume snapmirrors) from 980's, serves home directories to NFS and CIFS clients. We stopped all snapmirrors/snapvaults to the R200, terminated CIFS, and shut off NFS. CPU utilization remained 90%+ and disk reads remained high for the next 6-7-8 hours until it finally quieted down. After volume snapmirroring the home dirs from the 980's to the 6070, we re-pointed the snapvaults (modify; start -r) and allowed NFS and CIFS access. 5 days later, file server performance still blows (worse than the 980's -- D'oh! Egg, meet Face; Face, meet Egg), with moderate CPU load 30-40-50% but high disk reads. In both cases, we determined that lots of WAFL scans were going on: container block reclamation volume deswizzling active bitmap rearrangement (of course...this NEVER seems to stop) and a few other types that have already scrolled out of my buffer. So, we figure--eventually--the WAFL scans will catch up and performance will go back to normal on the 6070. The performance of the R200 always blows. So...here finally is the question: do toasters need a day off? Said another way, to maintain acceptable performance and low/fast response times, do toasters need a goodly amount of (relatively) idle time in order for these WAFL scans to complete? Could the sub-optimal performance of another group of six 6070's that we have, that we *pound on* 7x24, be explained in part by always having at least the container block reclamation scan going on? Until next time... The MathWorks, Inc. 508-647-7000 x7792 3 Apple Hill Drive, Natick, MA 01760-2098 508-647-7001 FAX tmerrill(a)mathworks.com http://www.mathworks.com ---

5 7

Snapvault hangs after tranfering a gig of data?
by Page, Jeremy 11 Dec '08

11 Dec '08

Going from a 7.2.4 machine to a 7.3 machine. This is an update. Here's what the secondary says: sim-array01*> snapvault status -l sim-array01:/vol/gso_shares/snapvault Snapvault secondary is ON. Source: 172.1.0.2:/vol/shares Destination: sim-array01:/vol/gso_shares/snapvault Status: Transferring Progress: 1209016 KB State: Snapvaulted Lag: 39:53:10 Mirror Timestamp: Tue Dec 9 23:02:54 EST 2008 Base Snapshot: sim-array01(0101197614)_gso_shares-base.2 Current Transfer Type: Update Current Transfer Error: - Contents: Transitioning Last Transfer Type: Update Last Transfer Size: 19680896 KB Last Transfer Duration: 05:11:29 Last Transfer From: 172.1.0.2:/vol/shares And here is what's on the primary: gvr-array02*> snapvault status -l sim-array01:/vol/gso_shares/snapvault Snapvault primary is ON. Source: gvr-array02:/vol/shares Destination: sim-array01:/vol/gso_shares/snapvault Status: Transferring Progress: 1212912 KB State: Source Lag: 39:56:53 Mirror Timestamp: Tue Dec 9 23:02:54 EST 2008 Base Snapshot: sv_daily.1 Current Transfer Type: - Current Transfer Error: - Contents: - Last Transfer Type: - Last Transfer Size: 19680896 KB Last Transfer Duration: 05:11:32 Last Transfer From: - I am at a loss, do I need to kill it and do a -r? This is the second time it's stopped (last night it did the same thing and I had to kill it, thus the long Lag: time. Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email.

3 3

Snapvaults schedules not at the top of the hour
by Page, Jeremy 10 Dec '08

10 Dec '08

What would be the best way to get snapvault to move a snapshot from the primary that's not created on an hour boundary? We're putting our DB into hot backup mode at 9:05 and I don't want to make the DBA change his scripts if possible, is there a way (maybe with rsh+cron) that I can manually create a snapshot at 9:15 and then use snapvault to transfer it? Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email.

3 2

7.3x on 800's
by Carl Howell 09 Dec '08

09 Dec '08

Has anyone attempted to put OnTap 7.3 on an 800 series filer? Can you do it? Is it simply that NetApp doesn¹t support it, or will it not run at all? Thanks, --Carl

3 2

oracle coruption caused by NFS file system is full
by Li, Jackie (Yanhui) 09 Dec '08

09 Dec '08

Our firm runs oracle 9i using NFS file system from Netapp(3040 running 7.2), we have noticed few cases now that when the NFS file system is full, oracle database crash and can not even start after that. It turns out that database has logical corruption, does anybody experience similar issues? Thanks

8 9

RE: oracle coruption caused by NFS file system is full
by Li, Jackie (Yanhui) 08 Dec '08

08 Dec '08

Thanks everybody's input, I have get a lot of replies, the best thing to do is obvious not get volume full. In our scenario, these are test/development databases, all the oracle files are on single NFS volume , database is not Running in archive mode, The argument so far is : Is corruption a normal behavior after oracle file system is full or it should never? Could this be anything particular related to NFS since we had never observed this on SAN? Jackie Thanks -----Original Message----- From: ericgrancher(a)gmail.com [mailto:ericgrancher@gmail.com] On Behalf Of Eric Grancher Sent: Monday, December 08, 2008 1:13 PM To: Matthew Zito; Glenn Dekhayser; Li, Jackie (Yanhui); toasters(a)mathworks.com Subject: Re: oracle coruption caused by NFS file system is full dear all, (being quite silent on the list, I take the occasion to say that I appreciate very much the contributions and for once that I can contribute...) From my understanding and experience (we got hit once at CERN when we started using DOT devices/NFS for Oracle databases, then we understood the issue and took the right actions to prevent this from happening again), the issue can typically be linked with snapshots: one (or more) snapshots having been created on the volume, Oracle needs to update a block, which turns to the need of more space as the old copy has to be kept (to preserve the snapshot). If no space is available, the write operation is refused which Oracle sees as a "corruption". It is quite well described in TR-3633, pages 22-24. http://media.netapp.com/documents/tr-3633.pdf The operations to be performed (after having added space) to recover from this situation depends on the type of the affected file, the cases are listed as well in the mentioned document. It may actually not be linked with auto-extensibility of Oracle datafiles (which we use extensively without problem). Just updating redo-log files and/or changing blocks in datafiles can generate the issue. Regarding actions to avoid such an issue happening again, it very much depends on your usage of snapshots: -1- if the snapshots are not used, removing the snapshots and disabling the automatic creation of new snapshots is enough! -2- using the vol autosize feature and making sure that there is enough space at the aggregate level (and max-autosize not reached) is a possibile solution (DFM is our friend for this!) -3- using vol option try_first http://now.netapp.com/NOW/knowledge/docs/ontap/rel7251/html/ontap/cmdref/ma… linked with snap autodelete as decribed in http://now.netapp.com/NOW/knowledge/docs/ontap/rel7251/html/ontap/cmdref/ma… could be a solution (which we do not use, be careful with your snapshots if they are a key part of your backup strategy!) best regards, eric 2008/12/8 Matthew Zito <mzito(a)gridapp.com>: > This is also why you don't enable autoextend on tablespaces, and put your > archive logs on a separate filesystem. Space management is part of the day > to day responsibility of a DBA. Running out of space is a Very Bad Thing > for databases. > Thanks, > Matt

1 0

Unix <=> NTFS permissions question
by Oskar Pienkos 08 Dec '08

08 Dec '08

Hello Toaster Experts! We are currently mounting an NFS directory, e.g. /home/production from a filer to a Solaris 10 box. Security is done by local passwd entries. We need to export this directory via CIFS with read and write access to a group of windows developers ( a group in Active Directory.) Is there a way to do this without converting the filer security from UNIX to NTFS? The shares is owned by a single unix UID but will be accessed by multiple AD users. Is there a way to translate AD groups into Unix groups since usermap.cfg seems to translate only user IDs. We don't want to run mixed-mode security. Thanks a lot. Oskar

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters