toasters

toasters@lists.teaparty.net

13520 discussions

Enabling create_ucode on volumes afterwards
by Alexander Griesser 03 May '13

03 May '13

Hey there, Today I was trying to find out, why with newer OnTap versions, new volumes created do not have the create_ucode = on setting anymore and I found out that it might have something to do what and when licenses are installed on the system. If no block level license (iscsi or fcp) is installed during setup, the root volume gets created with the create_ucode setting set to off and since all new volumes seem to inherit their settings from the root volume, they also will have create_ucode set to off. I did now set create_ucode = on on the root volume to make sure all new volumes get created with the option set to on also, that works, but I'm wondering if I need to be careful about setting create_ucode = on on already existing NFS, CIFS and iSCSI/FCP volumes. Does anyone know if that could cause troubles? Bye, Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

1 0

Linux Host Utilities 4.1
by Peta Thames 02 May '13

02 May '13

Hi, Anyone have a dusty old copy of Linux Host Utilities 4.1 lying around? I need to build a test cluster with RH 4.6, and I know the real fix is to upgrade the OS, but there's a world of dependencies on the app running on these servers so we need a test cluster to be able to prepare for that. Thanks, Peta

2 2

Configuration Error Messages on FAS2220-Single Controller
by Alexander Griesser 02 May '13

02 May '13

Hi again, we are running a FAS2220 Single Controller at one of our sites which acts as a snapvault secondary only (so just for backup purposes, no high availability required). Since the system has been installed, I'm getting messages like this in /etc/messages: Wed May 1 23:00:00 CEST [netapp03:monitor.shelf.fault:CRITICAL]: Fault reported on disk storage shelf attached to channel 0a. Please check fans, power supplies, disks, and temperature sensors. Wed May 1 23:00:00 CEST [netapp03:monitor.shelf.configError:CRITICAL]: Enclosure services has detected an error in access to shelves or shelf configuration 0a. Config Advisor tells me, that there is just a single path to the disks which is correct and maybe the reason for these messages. The FAS2220 does not have any external disk shelves, just 12 Disks in the head. Since there is no second controller, I didn't do any external SAS cabling (like you do for the 2240 HA systems when there are no disk shelves attached), so what can I do to make this filer happy again? Thanks, Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

2 3

Running on non-redundant power
by John Stoffel 02 May '13

02 May '13

Guys, We're in the process of starting to migrate from some 3140s running 7.3.6 to a 3220 cluster running 8.1.2, or whatever the latest release is. Going from 3.5 racks down to just 1 rack, woohoo! But I'm short of 30amp power plugs in my data center. So my plan is to drop one of my 3140s down to just two 30A circuits so I can bring up the 3220 cluster with fully redundant power. I know I need to turn off autosupport while this is happening, though I'd like to just turn off warning about power problems and keep auto support going for disk failures. Any suggestions or comments? Thanks, John

7 8

V-Series question
by Nail, Thomas E 01 May '13

01 May '13

All, I was wondering if anyone has any data or experience running a V-Series appliance in front of a DDN SFA-10K array. I understand that this configuration is totally unsupported (and there appears to be a significant amount of bad blood between DDN and NetApp), but I'm sure *someone* has tried it. Anyone want to 'fess up? Any horror stories? Thanks, -=Tom Nail

1 0

AW: Experience with sv-smvi?
by Alexander Griesser 01 May '13

01 May '13

Thanks, that drove me into the right direction – I was under the assumption, that some basic components are missing or failing here because I wasn’t even able to run it on the command line – my bad. I did now add –report and –reportdir to the script file which gets executed by VSC and am getting reports now, still not working but that’s because I’m using a private subnet for mounting the datastores which is not accessible from the VC server and am now playing with options (-svip, -noping, etc.). Will see how it goes, if it still doesn’t work, I’ll get back to you ☺ Thanks again for the hints! Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 Von: Xue, Youfeng [mailto:youfeng.xue@netapp.com] Gesendet: Mittwoch, 01. Mai 2013 15:27 An: Alexander Griesser Cc: toasters(a)teaparty.net Betreff: RE: Experience with sv-smvi? Hi ， alex Looks your script is good, would you please try to run it with –verbose –report -reportdir switch to have more information for troubleshooting? Here is my example: C:\"Program Files"\NetApp\"Virtual Storage Console"\smvi\server\scripts\sv-smvi.exe -svuser root -svpasswd password -verbose -report -reportdir C:\NetApp\sv_smvi_log And please makesure you have your snapvault initializated and filer hostname written to your vcenter ‘s host file or your dns is configured correctly. And the script should trigger only within VSC(normally SMVI), it will need SMVI to transfer the volume name and snapname to the script, or it could run with nothing. Good luck From: Alexander Griesser [mailto:ag@anexia.at] Sent: 2013年5月1日 21:01 To: Xue, Youfeng Cc: toasters(a)teaparty.net<mailto:toasters@teaparty.net> Subject: AW: Experience with sv-smvi? Hi, sure, this is it (just changed the password): "%PROGRAMFILES%\NetApp\SV-SMVI\sv-smvi.exe" -svuser root -svpasswd password The file (sv-smvi.exe) exists in this directory and when I call it manually f.ex. (outside of the VSC post-script environment), it looks like this: C:\Program Files\NetApp\SV-SMVI>sv-smvi.exe -svuser root -svpasswd password -verbose -debug runExit(): ----------------------------------------------------- runExit(): Exiting with return code: 0 C:\Program Files\NetApp\SV-SMVI> Bye, Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 Von: Xue, Youfeng [mailto:youfeng.xue@netapp.com] Gesendet: Mittwoch, 01. Mai 2013 14:48 An: Alexander Griesser Cc: toasters(a)teaparty.net<mailto:toasters@teaparty.net> Betreff: Re: Experience with sv-smvi? May I see you smvi.bat？在 2013-5-1，下午7:09，"Alexander Griesser" <ag(a)anexia.at<mailto:ag@anexia.at>> 写道： Hey, does anyone have experience with the sv-smvi script which can be used to support SnapVault in VSC Backups? I’m having some troubles with getting it running at all, no matter what I do, it always just exits with return code 0, even when I use the –verbose or –debug switches, it also does not write report files. Even if I’m giving it wrong user/password combinations, it still only exits with return code 0 and that’s about it then. Thanks, Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 _______________________________________________ Toasters mailing list Toasters(a)teaparty.net<mailto:Toasters@teaparty.net> http://www.teaparty.net/mailman/listinfo/toasters

1 1

deleting cifs shares entry
by Andrew Curry 01 May '13

01 May '13

I have a cifs share: colossus> cifs shares tt Name Mount Point Description ---- ----------- ----------- TT /vol/staffvol/tt timetabling COLOSSUS\administrator / Full Control ml / Full Control {uid:186} / Full Control smsb / Full Control I would like to delete the entry for {uid:186}. 186 is the unix uid of a user who has now left the university and whose account has been deleted. I have tried various possibilities without success. colossus> cifs access -delete tt {uid:186} Unknown user/group {uid:186} colossus> cifs access -delete tt uid:186 Unknown user/group uid:186 colossus> cifs access -delete tt 186 Unknown user/group 186 Does anyone know the correct syntax? Andrew Andrew Curry Senior Technical Analyst - Servers & Storage Converged Infrastructure Information Technology & Media Services DE MONTFORT UNIVERSITY T: +44 (0) 116 257 7463 E: ajc(a)dmu.ac.uk<mailto:ajc@dmu.ac.uk> W: dmu.ac.uk

2 1

AW: Experience with sv-smvi?
by Alexander Griesser 01 May '13

01 May '13

Hi, sure, this is it (just changed the password): "%PROGRAMFILES%\NetApp\SV-SMVI\sv-smvi.exe" -svuser root -svpasswd password The file (sv-smvi.exe) exists in this directory and when I call it manually f.ex. (outside of the VSC post-script environment), it looks like this: C:\Program Files\NetApp\SV-SMVI>sv-smvi.exe -svuser root -svpasswd password -verbose -debug runExit(): ----------------------------------------------------- runExit(): Exiting with return code: 0 C:\Program Files\NetApp\SV-SMVI> Bye, Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 Von: Xue, Youfeng [mailto:youfeng.xue@netapp.com] Gesendet: Mittwoch, 01. Mai 2013 14:48 An: Alexander Griesser Cc: toasters(a)teaparty.net Betreff: Re: Experience with sv-smvi? May I see you smvi.bat？在 2013-5-1，下午7:09，"Alexander Griesser" <ag(a)anexia.at<mailto:ag@anexia.at>> 写道： Hey, does anyone have experience with the sv-smvi script which can be used to support SnapVault in VSC Backups? I’m having some troubles with getting it running at all, no matter what I do, it always just exits with return code 0, even when I use the –verbose or –debug switches, it also does not write report files. Even if I’m giving it wrong user/password combinations, it still only exits with return code 0 and that’s about it then. Thanks, Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 _______________________________________________ Toasters mailing list Toasters(a)teaparty.net<mailto:Toasters@teaparty.net> http://www.teaparty.net/mailman/listinfo/toasters

1 0

Experience with sv-smvi?
by Alexander Griesser 01 May '13

01 May '13

Hey, does anyone have experience with the sv-smvi script which can be used to support SnapVault in VSC Backups? I'm having some troubles with getting it running at all, no matter what I do, it always just exits with return code 0, even when I use the -verbose or -debug switches, it also does not write report files. Even if I'm giving it wrong user/password combinations, it still only exits with return code 0 and that's about it then. Thanks, Alexander Griesser System-Administrator ANEXIA Internetdienstleistungs GmbH Telefon: +43-463-208501-320 Telefax: +43-463-208501-500 E-Mail: ag(a)anexia.at<mailto:ag@anexia.at> Web: http://www.anexia.at Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

1 0

Re: cf_config_check gone?
by John Stoffel 01 May '13

01 May '13

> I believe you can find the functionality in the config advisor. > http://support.netapp.com/NOW/download/tools/config_advisor/ > I've got the original tools laying around here somewhere but they > are outdated. Damn... it's a Windows only tool too. Grr... I was hoping to be able to run it from Unix. Oh well, I'll just install it and see how it works. Interestingly enough, it looks to be a Python app. John

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters