toasters March 2008

toasters@lists.teaparty.net

64 participants
37 discussions

Re: Can I view AD users data on filer
by Evan Battle 13 Mar '08

13 Mar '08

Mount the shares and view the NTFS permisions on the files/folders within share_1. You wont have any access to modify NTFS permissions from the CLI on the filer (only share permissions). xischaune wrote: > > Dear Evan... > Thanx for the reply...can you be a bit more specific as to what i need to > do...let me clarify the picture to you... > Im accessing the filer through the management port over ehternet, using > the command line interface. > I can see the cifs shares (say share_1) through "cifs shares" command, but > i dont find any "ls" or "cd" command to see the user files and folders in > the share_1. > You are referring to setting permissions, how do i do that. > OR > do i need to mount the filer as a client of windows AD domain and then > view the files and folders inside share_1. > > > > > Evan Battle wrote: >> >> If you are asking can you browse the file data of a user that resides in >> AD, the answer is yes, if you have the rights to do so. I am assuming >> you are referring to user data that resides in a CIFS share on the filer, >> the same rules apply to permissions (both share and NTFS) on the filer as >> they do in the Windows file server world. >> >> >> xischaune wrote: >>> >>> Hello everyone... >>> I am new to data ontap. Just wondering, is it possible for me to browse >>> AD users' data on the storage...if yes...how??? >>> Thanx >>> >> >> > > -- View this message in context: http://www.nabble.com/Can-I-view-AD-users-data-on-filer-tp16002550p16024547… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

2 3

iscsi, mpio of multiple connections with a single head
by netapp.filer＠gmail.com 13 Mar '08

13 Mar '08

Hi, I was wondering what the opinions are regaring setting up iscsi and MPIO. I have the following setup: Windows 2003 host, two nics for iSCSI, MS iSCSI initiator, Snapdrive 5.0 Two Network switches Netapp FAS3020 single head, with 2 nics for iSCSI (should I set this up as a vif?) How should I set up the IP adresses on the host, should I use a single vif on the filer? I have searched on the NOW site but there are no guides for this configuration, all config guides only discuss HA (Clustered filers) configurations -- View this message in context: http://www.nabble.com/iscsi%2C-mpio-of-multiple-connections-with-a-single-h… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

8 12

Failed shelf
by Robert Lazzurs 13 Mar '08

13 Mar '08

Hello, We have just been informed by NetApp that we have a failed shelf and a new shelf is on the way. I forgot to ask before I got off the phone if we would be able to use our trial license of SnapMirror to allow us to do this shelf swap over without downtime? This is a FC shelf and we only have enough space to mirror the volumes on to a SATA shelf. Will this work or am I mad? Take care.

5 4

RE: Some Filerview Pages Not Working
by Webster, Stetson 12 Mar '08

12 Mar '08

Assuming that the entire install was successful, there is a bug report on that. It happens to be an issue with some java setting (I don't remember which). In short, there is a simple setting to fix this. Now, back to the initial comment on the success of the upgrade: using the 'software install' command rather than unzipping into the vol0 share is always your best bet to unravel the files properly. Unless you used the 'software install' method, It is possible that files in /etc/java can be missing, etc Good luck . -----Original Message----- From: Timothy Hollingworth [mailto:thollingsworth@EPLUS.com] Sent: Wednesday, March 12, 2008 01:21 PM Pacific Standard Time To: toasters(a)mathworks.com Subject: Some Filerview Pages Not Working Upgrade of N'tap 7.0.x to 7.2.4 and now some filerview pages initialize java and then do not display. Happens with IE 6 and 7, various windows versions and Mozilla as well. Filer --> Use Command Line Filer --> Configure Autosupport And other pages. Anyone see this issue? Timothy L. Hollingworth | Sr. Network Engineer | ePlus Technology Inc. MCSE | VMware VCP | HP ASE-BladeSystem | NetApp ASA/NACA | Symantec Technical Specialist HollingworthTim (AIM/YIM) | 678.462.6698 (Cell) | http://www.eplus.com

2 2

Re: Can I view AD users data on filer
by Evan Battle 12 Mar '08

12 Mar '08

If you are asking can you browse the file data of a user that resides in AD, the answer is yes, if you have the rights to do so. I am assuming you are referring to user data that resides in a CIFS share on the filer, the same rules apply to permissions (both share and NTFS) on the filer as they do in the Windows file server world. xischaune wrote: > > Hello everyone... > I am new to data ontap. Just wondering, is it possible for me to browse AD > users' data on the storage...if yes...how??? > Thanx > -- View this message in context: http://www.nabble.com/Can-I-view-AD-users-data-on-filer-tp16002550p16011958… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com. The size of the volumes match of course for the correct use of > SnapMirror. Other volumes such as vol0 etc also identical. > > The oddity is that we have ~320Gb free on the source filer and ~680Gb free > on the destination! I have been over the filers with a fine tooth comb > and everything is identical. Of course I was worried that not everything > is being replicated as required to the destination but it is... > > I've been using filers for about 6 years so I thought I was well versed > but this has me stumped! > > Any ideas would be gratefully received! > > Many Thanks, > > Trevor > > -- View this message in context: http://www.nabble.com/Aggregate-space-differences-between-snapmirrored-file… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

1 0

RE: Expand LUN for Exch data
by Learmonth, Peter 12 Mar '08

12 Mar '08

SnapDrive makes an API call to expand the NTFS partition and file system within it. (It grows the LUN first.) This can be done with Exchange running. We demo this all the time. Happy holidays!! Share and Enjoy! Peter ... Sent from one of those phone+email doohicky things... I reserve the right to be wrong. -----Original Message----- From: Johnson, James A [HDS] [mailto:James.Johnson8@hdsupply.com] Sent: Monday, December 24, 2007 12:52 PM Pacific Standard Time To: Miller, Michael CTR USTRANSCOM J2; Kevin Parker; NetApp list Subject: RE: Expand LUN for Exch data How would that be possible? James -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Miller, Michael CTR USTRANSCOM J2 Sent: Friday, November 30, 2007 7:26 AM To: Kevin Parker; NetApp list Subject: RE: Expand LUN for Exch data Kevin Yes you can. I have done it a few times already with no problems. Mike Miller General Dynamics Information Technology Michael.Miller(a)gdit.com -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Kevin Parker Sent: Friday, November 30, 2007 8:05 AM To: NetApp list Subject: Expand LUN for Exch data I'm off network so I can't research this, but want to ensure that I can expand a LUN for Exchange on the fly, no downtime. Plan to use SnapDrive 5.0. Volume is already large enough in capacity. Thanks!! Best regards, Kevin M. Parker Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.

8 11

Accessing RLM using PuTTY (ssh) unresponsive
by slemmesmi 11 Mar '08

11 Mar '08

Dear all, Have FAS3020 single head running ONTAP 7.0.2 at customer site. I have no problem using PuTTY ssh to access the CLI of the FAS. Have configured RLM and it's running fine - 'rlm status' shows: myfas> rlm status Remote LAN Module Status: Online Part Number: 110-00030 Revision: C0 Serial Number: 312392 Firmware Version: 1.1.0 Mgmt MAC Address: 00:A0:98:01:EC:FC Using DHCP: no IP Address: 192.168.1.20 Netmask: 255.255.255.0 Gateway: 192.168.1.1 The RLM responds to ping and I can connect to this without problems using OpenSSH (version 3.8.1) from http://sourceforge.net/projects/sshwindows/ However when I try using SSH in PuTTY to connect to the RLM, I get as far as entering user and password, then the sessions seams unresponsive and appears to "hang": rlmroot@myfasrlm's password: When I then press CTRL+D to close the session, I briefly see the RLM prompt: RLM myfas> In PuTTY, as template for the ssh session to the RLM (myfasrlm), I use the ssh session (myfas) I created for the FAS "normal" ssh access, registry entries for that shows the settings: [HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\Sessions\myfasrlm] "Present"=dword:00000001 "HostName"="myfasrlm" "LogFileName"="C:\\Temp\\myfasrlm.log" "LogType"=dword:00000001 "LogFileClash"=dword:00000000 "LogFlush"=dword:00000001 "SSHLogOmitPasswords"=dword:00000001 "SSHLogOmitData"=dword:00000000 "Protocol"="ssh" "PortNumber"=dword:00000016 "CloseOnExit"=dword:00000001 "WarnOnClose"=dword:00000001 "PingInterval"=dword:00000000 "PingIntervalSecs"=dword:00000000 "TCPNoDelay"=dword:00000001 "TCPKeepalives"=dword:00000000 "TerminalType"="xterm" "TerminalSpeed"="38400,38400" "TerminalModes"="INTR=A,QUIT=A,ERASE=A,KILL=A,EOF=A,EOL=A,EOL2=A,START=A,STOP=A,SUSP=A,DSUSP=A,REPRINT=A,WERASE=A,LNEXT=A,FLUSH=A,SWTCH=A,STATUS=A,DISCARD=A,IGNPAR=A,PARMRK=A,INPCK=A,ISTRIP=A,INLCR=A,IGNCR=A,ICRNL=A,IUCLC=A,IXON=A,IXANY=A,IXOFF=A,IMAXBEL=A,ISIG=A,ICANON=A,XCASE=A,ECHO=A,ECHOE=A,ECHOK=A,ECHONL=A,NOFLSH=A,TOSTOP=A,IEXTEN=A,ECHOCTL=A,ECHOKE=A,PENDIN=A,OPOST=A,OLCUC=A,ONLCR=A,OCRNL=A,ONOCR=A,ONLRET=A,CS7=A,CS8=A,PARENB=A,PARODD=A," "AddressFamily"=dword:00000000 "ProxyExcludeList"="" "ProxyDNS"=dword:00000001 "ProxyLocalhost"=dword:00000000 "ProxyMethod"=dword:00000000 "ProxyHost"="proxy" "ProxyPort"=dword:00000050 "ProxyUsername"="" "ProxyPassword"="" "ProxyTelnetCommand"="connect %host %port\\n" "Environment"="" "UserName"="" "LocalUserName"="" "NoPTY"=dword:00000001 "Compression"=dword:00000000 "TryAgent"=dword:00000001 "AgentFwd"=dword:00000000 "ChangeUsername"=dword:00000000 "Cipher"="aes,blowfish,3des,WARN,arcfour,des" "KEX"="dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,WARN" "RekeyTime"=dword:0000003c "RekeyBytes"="1G" "SshNoAuth"=dword:00000000 "AuthTIS"=dword:00000000 "AuthKI"=dword:00000001 "SshNoShell"=dword:00000000 "SshProt"=dword:00000002 "SSH2DES"=dword:00000000 "PublicKeyFile"="" "RemoteCommand"="" "RFCEnviron"=dword:00000000 "PassiveTelnet"=dword:00000000 "BackspaceIsDelete"=dword:00000001 "RXVTHomeEnd"=dword:00000000 "LinuxFunctionKeys"=dword:00000000 "NoApplicationKeys"=dword:00000000 "NoApplicationCursors"=dword:00000000 "NoMouseReporting"=dword:00000000 "NoRemoteResize"=dword:00000000 "NoAltScreen"=dword:00000000 "NoRemoteWinTitle"=dword:00000000 "RemoteQTitleAction"=dword:00000001 "NoDBackspace"=dword:00000000 "NoRemoteCharset"=dword:00000000 "ApplicationCursorKeys"=dword:00000000 "ApplicationKeypad"=dword:00000000 "NetHackKeypad"=dword:00000000 "AltF4"=dword:00000001 "AltSpace"=dword:00000000 "AltOnly"=dword:00000000 "ComposeKey"=dword:00000000 "CtrlAltKeys"=dword:00000001 "TelnetKey"=dword:00000000 "TelnetRet"=dword:00000001 "LocalEcho"=dword:00000001 "LocalEdit"=dword:00000001 "Answerback"="PuTTY" "AlwaysOnTop"=dword:00000000 "FullScreenOnAltEnter"=dword:00000000 "HideMousePtr"=dword:00000000 "SunkenEdge"=dword:00000000 "WindowBorder"=dword:00000001 "CurType"=dword:00000000 "BlinkCur"=dword:00000000 "Beep"=dword:00000001 "BeepInd"=dword:00000000 "BellWaveFile"="" "BellOverload"=dword:00000001 "BellOverloadN"=dword:00000005 "BellOverloadT"=dword:000007d0 "BellOverloadS"=dword:00001388 "ScrollbackLines"=dword:000007d0 "DECOriginMode"=dword:00000000 "AutoWrapMode"=dword:00000001 "LFImpliesCR"=dword:00000000 "DisableArabicShaping"=dword:00000000 "DisableBidi"=dword:00000000 "WinNameAlways"=dword:00000001 "WinTitle"="" "TermWidth"=dword:00000080 "TermHeight"=dword:00000030 "Font"="Courier New" "FontIsBold"=dword:00000000 "FontCharSet"=dword:00000000 "FontHeight"=dword:0000000a "FontQuality"=dword:00000000 "FontVTMode"=dword:00000004 "UseSystemColours"=dword:00000000 "TryPalette"=dword:00000000 "ANSIColour"=dword:00000001 "Xterm256Colour"=dword:00000001 "BoldAsColour"=dword:00000001 "Colour0"="0,255,0" "Colour1"="255,255,255" "Colour2"="0,0,0" "Colour3"="85,85,85" "Colour4"="0,0,0" "Colour5"="0,255,0" "Colour6"="0,0,0" "Colour7"="85,85,85" "Colour8"="187,0,0" "Colour9"="255,85,85" "Colour10"="0,187,0" "Colour11"="85,255,85" "Colour12"="187,187,0" "Colour13"="255,255,85" "Colour14"="0,0,187" "Colour15"="85,85,255" "Colour16"="187,0,187" "Colour17"="255,85,255" "Colour18"="0,187,187" "Colour19"="85,255,255" "Colour20"="187,187,187" "Colour21"="255,255,255" "RawCNP"=dword:00000000 "PasteRTF"=dword:00000000 "MouseIsXterm"=dword:00000000 "RectSelect"=dword:00000000 "MouseOverride"=dword:00000001 "Wordness0"="0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0" "Wordness32"="0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1" "Wordness64"="1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2" "Wordness96"="1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1" "Wordness128"="1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1" "Wordness160"="1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1" "Wordness192"="2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2" "Wordness224"="2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2" "LineCodePage"="" "CJKAmbigWide"=dword:00000000 "UTF8Override"=dword:00000001 "Printer"="" "CapsLockCyr"=dword:00000000 "ScrollBar"=dword:00000001 "ScrollBarFullScreen"=dword:00000000 "ScrollOnKey"=dword:00000000 "ScrollOnDisp"=dword:00000001 "EraseToScrollback"=dword:00000001 "LockSize"=dword:00000000 "BCE"=dword:00000001 "BlinkText"=dword:00000000 "X11Forward"=dword:00000000 "X11Display"="" "X11AuthType"=dword:00000001 "LocalPortAcceptAll"=dword:00000000 "RemotePortAcceptAll"=dword:00000000 "PortForwardings"="" "BugIgnore1"=dword:00000000 "BugPlainPW1"=dword:00000000 "BugRSA1"=dword:00000000 "BugHMAC2"=dword:00000000 "BugDeriveKey2"=dword:00000000 "BugRSAPad2"=dword:00000000 "BugPKSessID2"=dword:00000000 "BugRekey2"=dword:00000000 "StampUtmp"=dword:00000001 "LoginShell"=dword:00000001 "ScrollbarOnLeft"=dword:00000000 "BoldFont"="" "BoldFontIsBold"=dword:00334b28 "BoldFontCharSet"=dword:0046f79c "BoldFontHeight"=dword:0012fa00 "WideFont"="" "WideFontIsBold"=dword:0bd1a9ba "WideFontCharSet"=dword:00334b28 "WideFontHeight"=dword:0012cc48 "WideBoldFont"="" "WideBoldFontIsBold"=dword:0077654e "WideBoldFontCharSet"=dword:0bd1a9ba "WideBoldFontHeight"=dword:003a0178 "ShadowBold"=dword:00000000 "ShadowBoldOffset"=dword:00000001 "SerialLine"="COM1" "SerialSpeed"=dword:00002580 "SerialDataBits"=dword:00000008 "SerialStopHalfbits"=dword:00000002 "SerialParity"=dword:00000000 "SerialFlowControl"=dword:00000001 Has anybody got an idea what the problem is with the above - do I need to change a setting or two? I can of course implement OpenSSH as work around for the customer, but customer prefer PuTTY (for obvious reasons). Kind regards, Soren -- View this message in context: http://www.nabble.com/Accessing-RLM-using-PuTTY-%28ssh%29-unresponsive-tp15… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

3 2

Quotas for A.D. groups
by Kevin Parker 11 Mar '08

11 Mar '08

Toasters: Client wants ability to quota by Active Directory group. I see some products out there, but none seem to be able to set a quota on a volume/qtree/directory with the quota pertaining to an A.D. group. Only way I've implemented these in the past is to control access via NTFS ACL such that the A.D. group has write access (everyone else read or none), then set qtree quota. Client has political reasons not to restrict access via NTFS. This is NAS/CIFS only environment. Has anyone else out there found another way, or using any other 3rd party *ware? Best regards, Kevin M. Parker [cid:image001.gif@01C87EC2.A5BBE990]<http://www.nwnit.com/> [cid:image002.png@01C87EC2.A5BBE990] Sr. Storage Solutions Engineer l 919.830.5819 mobile l 919.653.4489 office l 860 Aviation Pkwy., Ste. 1000, Morrisville, NC 27560 ________________________________ Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.

7 7

Re: FCP curiosity
by Fred Grieco 09 Mar '08

09 Mar '08

Almost certainly this is due to inconsistent zoning on the Brocade, or missing zoning for the filer ports on that switch. If you are seeing one listing for each initiator, then those are probably coming through the interconnect. ----- Original Message ---- From: Milazzo Giacomo <G.Milazzo(a)sinergy.it> To: toasters(a)mathworks.com Sent: Thursday, March 6, 2008 2:51:34 PM Subject: FCP curiosity  Hi I’ve just set up a 3020C with two HBA attached to acouple of Brocade, and on these, 2 couple of HBA coming from 2 Windows host. ASAN, do you know it? J The links are the usual ones: i.e. the 1st HBA of host “A” to the upper Brocade, the 2nd to the lower and so on…the 0b of the head to the upper, the 0d to the lower and the same for other head. When I perform a scan of fcp channels (priv set advanced, don’t remember now the command) from one of the two head of the 3020C I see 4 WWN of the 4 HBA of the hosts repente two times (4 real and 4 replicated) and I’ve already saw this times ago (the path is replicated through the cluster interconnect). But when I perform the same from the other head I can see only 4 WWN belonging to the hosts. Why? Something wrong on link of the hosts to the couple of switch? Maybe because I’ve not yet zoned the switches? Thanx a lot

2 1

DS14 mk1 shelf with new disk in caddy?
by Delorean7 09 Mar '08

09 Mar '08

It simply amazes me still how some people can take a piece of expensive sophisticated technology and treat it like it was a free giveaway or something. A disk has failed in an older DS14 shelf 144 GB 10k fc (Part X274) and the admin replaced it with a run of the mill brand disk hoping it would replace it because it is 'just' a RAID array ;). We have some spare newer 144 GB 10k disks for DS14mk2/4 lying about, do they fit with these older shelve types? Current disks report as: NETAPP X274_HPYTA146F10 NA02 136.0GB 520B/sec -- View this message in context: http://www.nabble.com/DS14-mk1-shelf-with-new-disk-in-caddy--tp15943410p159… Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.

3 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters March 2008