toasters July 2003

toasters@lists.teaparty.net

88 participants
94 discussions

Offline Folders with Windows 2000
by Vincent, Alex 04 Jul '03

04 Jul '03

I have been experimenting with the offline folders feature of Windows 2000 Professional to make a local offline copy of a network share held on the filer. I have found that when I create a brand new share on a Windows 2000 Server and mark this share to be available offline everything works OK. When I create an identical share on our filer and make this available offline everything seems fine at first. The documents will sync. I can then take my laptop off of our network and read the offline copies of the documents. The problem comes when I reconnect. If I have only created new documents whilst at home, on reconnection these synchronize fine. If I have amended an existing document, when I return the synchronization fails with the following errors : Offline Files (\\Filer\share <file://\\Filer\share> on Filer): Unable to access 'New Microsoft Word Document.doc' on \\Filer\share <file://\\Filer\share> . An unexpected network error occurred. Offline Files (\\Filer\share <file://\\Filer\share> on Filer): Unable to merge offline changes on '\\filer\share'. An unexpected network error occurred. I have checked the permissions and both share and file level permissions are set to Everyone - Full Control. I have also upgraded to the latest version of OnTap hoping this would cure it. Any ideas ? Kind regards, Alex Vincent Pfizer Consumer Healthcare This message and any associated files, is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or legal privilege, constitutes a trade secret or otherwise protected by other legal rules. If you are not the intended recipient you are hereby notified that any use, perusal, dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you received this message in error, please notify us immediately by e-mail, fax or telephone, and destroy the original message. Thank you.

3 2

RE: iSCSI on Windows
by Steve Evans 04 Jul '03

04 Jul '03

Okay. I guess it's time to fire up the simulator. Steve Evans SDSU Foundation (619) 594-0653 -----Original Message----- From: Reinoud Reynders [mailto:Reinoud.Reynders@uz.kuleuven.ac.be] Sent: Thursday, July 03, 2003 12:18 PM To: Steve Evans; toasters(a)mathworks.com Subject: RE: iSCSI on Windows For the microsoft initiator, you need 6.4.1 on the filers. Reinoud -----Oorspronkelijk bericht----- Van: Steve Evans [mailto:sevans@foundation.sdsu.edu] Verzonden: do 7/3/2003 7:16 PM Aan: toasters(a)mathworks.com CC: Onderwerp: iSCSI on Windows I'm trying to set up an iSCSI connection between a Windows 2000 Server box and my NetApp Filer. I have the document Microsoft iSCSI Software Initiator HOWTO. I'm on step 4.3 - Adding a target When I try to add the Filer as a Target Portal on the Windows box it returns the error "Unsupported Version." Similar message on the Filer console. Any ideas anyone? I was going to call NetApp but I'm not feeling well today and would prefer to stay off the phone. Steve Evans SDSU Foundation (619) 594-0653

2 2

RE: New qtrees not showing in DFM 2.2
by Hill, Aaron 04 Jul '03

04 Jul '03

Thanks to Ray for a simple answer to a simple question; dfm host discover <host> -----Original Message----- From: Hill, Aaron Sent: Friday, 4 July 2003 3:36 PM To: 'toasters(a)mathworks.com' Subject: New qtrees not showing in DFM 2.2 Toasters, Got what I think is an easy one for you. How do I get my newly created qtrees to show up in DFM 2.2? NOW shows a Readme First doco at http://now.netapp.com/now/knowledge/docs/DFM_win/rel22/pdfs/readme.pdf <http://now.netapp.com/now/knowledge/docs/DFM_win/rel22/pdfs/readme.pdf> but I cannot get the damn thing to open! Is there anyone out there in toaster land that has read this, has a copy of it or knows of a fix? Thanks in advance, Aaron ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. **************************************************

1 0

New qtrees not showing in DFM 2.2
by Hill, Aaron 04 Jul '03

04 Jul '03

Toasters, Got what I think is an easy one for you. How do I get my newly created qtrees to show up in DFM 2.2? NOW shows a Readme First doco at http://now.netapp.com/now/knowledge/docs/DFM_win/rel22/pdfs/readme.pdf <http://now.netapp.com/now/knowledge/docs/DFM_win/rel22/pdfs/readme.pdf> but I cannot get the damn thing to open! Is there anyone out there in toaster land that has read this, has a copy of it or knows of a fix? Thanks in advance, Aaron ************** IMPORTANT MESSAGE ************** This e-mail message is intended only for the addressee(s) and contains information which may be confidential. If you are not the intended recipient please advise the sender by return email, do not use or disclose the contents, and delete the message and any attachments from your system. Unless specifically indicated, this email does not constitute formal advice or commitment by the sender or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its subsidiaries. **************************************************

1 0

RE: Can I reset a SCSI interface on a filer?
by Francett, Robert D (SAIC) 03 Jul '03

03 Jul '03

OK, thanks for the update (& correction). My bad :( Guess I should consider the update; I'd like this feature. Bob -----Original Message----- From: Allen, Pat [mailto:pat@mbari.org] Sent: Thursday, July 03, 2003 11:39 AM To: Francett, Robert D (SAIC) Cc: 'stephane.bentebba(a)fps.fr' Subject: RE: Can I reset a SCSI interface on a filer? Hi, Are you running 6.4? This is a new feature with that version of ONTAP. Pat -----Original Message----- From: Francett, Robert D (SAIC) [mailto:FranceRD@BP.com] Sent: Thursday, July 03, 2003 12:22 PM To: Stephane Bentebba; Allen, Pat Cc: toasters(a)mathworks.com Subject: RE: Can I reset a SCSI interface on a filer? FYI... The disabling of SCSI adapters, and also any non-redundant adapter, is not allowed. Example: toaster> storage disable adapter 1 Disabling scsi host adapters is not allowed Regards, Bob Francett -----Original Message----- From: Stephane Bentebba [mailto:stephane.bentebba@fps.fr] Sent: Thursday, July 03, 2003 8:41 AM To: Allen, Pat Cc: toasters(a)mathworks.com Subject: Re: Can I reset a SCSI interface on a filer? sure you can : nac5> storage disable usage: disable adapter <name> disables and stops I/O traffic on adapters and switches nac5> storage enable usage: enable adapter <name> enables and starts or restarts I/O traffic on an adapter use this with the id of the adapter and you can reset the scsi w/out reboot the filer (great improvment on last dot) Allen, Pat wrote: >Hi all, > >I have a pair of clustered 820's running Data ONTAP 6.4. One of the heads has a SCSI host adapter (Qlogic ISP 1040B) connected to a tape library that we use for backing up the filers. Occasionally the library will become confused and we will need to reset the SCSI interface in order to get it back into an operational mode. In the past we have done a takeover on the partner and then shut down / restarted the head with the SCSI card. Needless to say this is problematic. > >Is there any way to reset the SCSI interface on these cards without impacting the filer's operations? If not, are there other replacement cards which would allow me to do this? > >Thanks! >--- >Pat Allen (pat(a)mbari.org) >Monterey Bay Aquarium Research Institute (MBARI) >7700 Sandholdt Rd, Moss Landing, CA 95039 >(voice) 831-775-1724; (fax) 831-775-1620 > > > -- -- jetez un oeil ici http://www.sensiva.com/ -- -- have a look here http://www.sensiva.com/ --

1 0

Re: Anyone using disk_usage.pl script? [Fwd: SUMMARY: disk_usage.pl script not working after upgrade to Ontap 6.3.1R1]
by Stephane Bentebba 03 Jul '03

03 Jul '03

-- -- jetez un oeil ici http://www.sensiva.com/ -- -- have a look here http://www.sensiva.com/ --

2 1

RE: Can I reset a SCSI interface on a filer?
by Summers, John 03 Jul '03

03 Jul '03

Yes it is .... ONTap 6.4x NetApp Release 6.4R1D8: Mon Apr 7 18:08:07 PDT 2003 fas960-rtp> storage disable adapter 4a Adapter 4a is part of a parallel SCSI bus dual-channel adapter so adapter 4b will also be disabled. Disabling adapters 4a and 4b... Thu Jul 3 20:00:47 GMT [rc:notice]: Offlining SCSI adapter 4a. Thu Jul 3 20:00:52 GMT [rc:notice]: Offlining SCSI adapter 4b. host adapter 4a and 4b disable succeeded Please follow the instructions described in the man page to add or remove tape drives or medium changers from the SCSI bus. fas960-rtp> storage enable adapter 4a Adapter 4a is part of a parallel SCSI bus dual-channel adapter so adapter 4b will also be enabled. Thu Jul 3 20:01:01 GMT [rc:notice]: Onlining SCSI adapter 4a. host adapter 4a enable succeeded Thu Jul 3 20:01:10 GMT [rc:notice]: Onlining SCSI adapter 4b. host adapter 4b enable succeeded John Summers NTAP tech support -----Original Message----- From: Francett, Robert D (SAIC) [mailto:FranceRD@bp.com] Sent: Thursday, July 03, 2003 3:22 PM To: Stephane Bentebba; Allen, Pat Cc: toasters(a)mathworks.com Subject: RE: Can I reset a SCSI interface on a filer? FYI... The disabling of SCSI adapters, and also any non-redundant adapter, is not allowed. Example: toaster> storage disable adapter 1 Disabling scsi host adapters is not allowed Regards, Bob Francett -----Original Message----- From: Stephane Bentebba [mailto:stephane.bentebba@fps.fr] Sent: Thursday, July 03, 2003 8:41 AM To: Allen, Pat Cc: toasters(a)mathworks.com Subject: Re: Can I reset a SCSI interface on a filer? sure you can : nac5> storage disable usage: disable adapter <name> disables and stops I/O traffic on adapters and switches nac5> storage enable usage: enable adapter <name> enables and starts or restarts I/O traffic on an adapter use this with the id of the adapter and you can reset the scsi w/out reboot the filer (great improvment on last dot) Allen, Pat wrote: >Hi all, > >I have a pair of clustered 820's running Data ONTAP 6.4. One of the heads has a SCSI host adapter (Qlogic ISP 1040B) connected to a tape library that we use for backing up the filers. Occasionally the library will become confused and we will need to reset the SCSI interface in order to get it back into an operational mode. In the past we have done a takeover on the partner and then shut down / restarted the head with the SCSI card. Needless to say this is problematic. > >Is there any way to reset the SCSI interface on these cards without impacting the filer's operations? If not, are there other replacement cards which would allow me to do this? > >Thanks! >--- >Pat Allen (pat(a)mbari.org) >Monterey Bay Aquarium Research Institute (MBARI) >7700 Sandholdt Rd, Moss Landing, CA 95039 >(voice) 831-775-1724; (fax) 831-775-1620 > > > -- -- jetez un oeil ici http://www.sensiva.com/ -- -- have a look here http://www.sensiva.com/ --

1 0

RE: Can I reset a SCSI interface on a filer?
by Francett, Robert D (SAIC) 03 Jul '03

03 Jul '03

FYI... The disabling of SCSI adapters, and also any non-redundant adapter, is not allowed. Example: toaster> storage disable adapter 1 Disabling scsi host adapters is not allowed Regards, Bob Francett -----Original Message----- From: Stephane Bentebba [mailto:stephane.bentebba@fps.fr] Sent: Thursday, July 03, 2003 8:41 AM To: Allen, Pat Cc: toasters(a)mathworks.com Subject: Re: Can I reset a SCSI interface on a filer? sure you can : nac5> storage disable usage: disable adapter <name> disables and stops I/O traffic on adapters and switches nac5> storage enable usage: enable adapter <name> enables and starts or restarts I/O traffic on an adapter use this with the id of the adapter and you can reset the scsi w/out reboot the filer (great improvment on last dot) Allen, Pat wrote: >Hi all, > >I have a pair of clustered 820's running Data ONTAP 6.4. One of the heads has a SCSI host adapter (Qlogic ISP 1040B) connected to a tape library that we use for backing up the filers. Occasionally the library will become confused and we will need to reset the SCSI interface in order to get it back into an operational mode. In the past we have done a takeover on the partner and then shut down / restarted the head with the SCSI card. Needless to say this is problematic. > >Is there any way to reset the SCSI interface on these cards without impacting the filer's operations? If not, are there other replacement cards which would allow me to do this? > >Thanks! >--- >Pat Allen (pat(a)mbari.org) >Monterey Bay Aquarium Research Institute (MBARI) >7700 Sandholdt Rd, Moss Landing, CA 95039 >(voice) 831-775-1724; (fax) 831-775-1620 > > > -- -- jetez un oeil ici http://www.sensiva.com/ -- -- have a look here http://www.sensiva.com/ --

1 0

RE: iSCSI on Windows
by Reinoud Reynders 03 Jul '03

03 Jul '03

For the microsoft initiator, you need 6.4.1 on the filers. Reinoud -----Oorspronkelijk bericht----- Van: Steve Evans [mailto:sevans@foundation.sdsu.edu] Verzonden: do 7/3/2003 7:16 PM Aan: toasters(a)mathworks.com CC: Onderwerp: iSCSI on Windows I'm trying to set up an iSCSI connection between a Windows 2000 Server box and my NetApp Filer. I have the document Microsoft iSCSI Software Initiator HOWTO. I'm on step 4.3 - Adding a target When I try to add the Filer as a Target Portal on the Windows box it returns the error "Unsupported Version." Similar message on the Filer console. Any ideas anyone? I was going to call NetApp but I'm not feeling well today and would prefer to stay off the phone. Steve Evans SDSU Foundation (619) 594-0653

1 0

iSCSI on Windows
by Steve Evans 03 Jul '03

03 Jul '03

I'm trying to set up an iSCSI connection between a Windows 2000 Server box and my NetApp Filer. I have the document Microsoft iSCSI Software Initiator HOWTO. I'm on step 4.3 - Adding a target When I try to add the Filer as a Target Portal on the Windows box it returns the error "Unsupported Version." Similar message on the Filer console. Any ideas anyone? I was going to call NetApp but I'm not feeling well today and would prefer to stay off the phone. Steve Evans SDSU Foundation (619) 594-0653

1 0

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters July 2003