Hi Kerry,
The issue here is that the TSM backup server (AIX? NT/Win2K?) won't be able
to understand the WAFL filesystem structure. So the most that is
theoretically possible is a raw LUN block dump (I don't think TSM supports
that anyway).
What exactly do you mean by "SAN client"?
If by that you mean that you have virtualised disks (LUNs managed by the
filer accessed via VLD, iSCSI or FCP) that are stored on your filer then
yes, TSM may be able to mount the LUN as it will use a filesystem layout
that such as NTFS or JFS that TSM will understand.
If however you mean FC block I/O access to a WAFL filesystem - which is what
your post implies - then no, and it makes no sense to try. This is where
NDMP will provide more value depending on the TSM version you are running.
If you can post to toasters or email me directly with more detailed
configuration information (TSM version, OS versions, network configuration
etc.) then I or someone else here can help with more specific advice.
What you probably want to do is give your filer a FC connection to your tape
library so TSM can use NDMP to manage a "local" backup to the tape library
from the filer. You will need to be careful with zoning on your FC switches.
Also, only the Vixel 8100-NAS and some Brocade models of FC switch are
officialy supported by NetApp for this configuration. (doesn't mean it won't
work with other switches of course). AFAIK TSM 5 and later support this.
An alternative is to add a couple of NIC's and provide a dedicated
[crossover, or through switch with jumbo frame support] gigabit link between
the filer and the TSM server. Set your MTU size to 9014 bytes for this link,
and use an IP range that does not exist on your LAN to prevent route table
issues. (i.e. if your LAN is say 10.x.y.z use 192.168.y.z for the dedicated
link). You should be able to get over 30MB/sec for NDMP transfers over this
link, more than enough to keep an AIT3, SDLT or LTO drive busy. However,
only the most recent versions of TSM (6.0? can't remember right now and I'm
mobile, need to check) support NDMP data streaming over an ethernet link.
regards,
Alan.
-----Original Message-----
From: Kerry Herschel
To: toasters(a)mathworks.com
Sent: 9/07/2003 4:51 PM
Subject: access same files via SAN and NFS
Hi,
I'm interested in setting up a volume that a NFS client can write files
to
via an NFS mount point and our TSM backup server can backup via a SAN
connection. Can I setup a volume that can be accessed by both a NFS
client
and a SAN client? Netapp tech support says no but when reading the
documentation it sounds like I can do it. Has anyone done this?
Thanks for any input,
Kerry Herschel
================================================================
Margaret.K.Herschel(a)jpl.nasa.gov
ICIS
Jet Propulsion Laboratory
Phone 818.354.1111
DISCLAIMER: The personal and professional opinions presented herein
are my own and do not, in any way, represent the opinion or policy of
JPL.
**** ASI Solutions Disclaimer ****
The material transmitted may contain confidential and/or privileged
material and is intended only for the addressee. If you receive this in
error, please notify the sender and destroy any copies of the material
immediately. ASI will protect your Privacy according to the 10 Privacy
Principles outlined under the new Privacy Act, Dec 2001.
This email is also subject to copyright. Any use of or reliance upon this
material by persons or entities other than the addressee is prohibited.
E-mails may be interfered with, may contain computer viruses or other
defects. Under no circumstances do we accept liability for any loss or
damage which may result from your receipt of this message or any
attachments.
**** END OF MESSAGE ****