Hi,
Anyone using Netbackup 7.6.0.1 to backup via three way NDMP, a CIFS share/volume on cDOT inside a VServer? It just ain't working for me. I suspect I need to upgrade to Netbackup 7.7, but before I go that route... I'm looking for other options.
Basically, I want to have the NDMP data flow over the network to the Netbackup server, then from there to Tape. I don't have/want direct attached SAN tape drives at this time on our four node cluster. It's just one single volume I need backed up right now.
Thanks, John
Looks like you ar ein the ballpark here: (from NetApp: http://www.netapp.com/us/solutions/a-z/backup-to-tape/backup-to-tape-ndmp.as... )
NetBackup: 6.5 & 7.0 with Data ONTAP 8.0.x 7-Mode and Clustered DATA ONTAP® 7.1 and 7.5 with Data ONTAP 8.1.x 7-Mode and Clustered DATA ONTAP 7.5 with Data ONTAP 8.2.x 7-mode & Clustered DATA ONTAP 7.6 with Clustered DATA ONTAP 8.3.x I *think* you may need to create a new management LIF to let the data flow out. I do not remember for sure, but if you are saavy enough....try a dump, and then examine the packet traces....it will tell you where it is trying to send the data.
I will try to look it up, but it was some odd thing where the request came into the SVM-scoped vserver and the data wanted to go out the management interface. We created a new mgmt lif on the same subnet as the SVM at I think that allowed the data to flow out.
Now, this may or may not be a netapp bug, I do not recall. It may behoove you to also update your netApp to a current release and try again.
Be sure you are NOT using NODE-SCOPED ndmp, and you are configured for SVM-SCOPED NDMP
--tmac
--tmac
*Tim McCarthy* *Principal Consultant*
On Tue, Nov 3, 2015 at 4:32 PM, John Stoffel john@stoffel.org wrote:
Hi,
Anyone using Netbackup 7.6.0.1 to backup via three way NDMP, a CIFS share/volume on cDOT inside a VServer? It just ain't working for me. I suspect I need to upgrade to Netbackup 7.7, but before I go that route... I'm looking for other options.
Basically, I want to have the NDMP data flow over the network to the Netbackup server, then from there to Tape. I don't have/want direct attached SAN tape drives at this time on our four node cluster. It's just one single volume I need backed up right now.
Thanks, John _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Hello, I faced the same issue a while ago. 7.6.0.1 does not work with ndmp cluster level. It will have to be a node level backup. The new version of the software permits the cluster level, vserver level backup. On 3 Nov 2015 9:51 pm, "tmac" tmacmd@gmail.com wrote:
Looks like you ar ein the ballpark here: (from NetApp: http://www.netapp.com/us/solutions/a-z/backup-to-tape/backup-to-tape-ndmp.as... )
NetBackup: 6.5 & 7.0 with Data ONTAP 8.0.x 7-Mode and Clustered DATA ONTAP® 7.1 and 7.5 with Data ONTAP 8.1.x 7-Mode and Clustered DATA ONTAP 7.5 with Data ONTAP 8.2.x 7-mode & Clustered DATA ONTAP 7.6 with Clustered DATA ONTAP 8.3.x I *think* you may need to create a new management LIF to let the data flow out. I do not remember for sure, but if you are saavy enough....try a dump, and then examine the packet traces....it will tell you where it is trying to send the data.
I will try to look it up, but it was some odd thing where the request came into the SVM-scoped vserver and the data wanted to go out the management interface. We created a new mgmt lif on the same subnet as the SVM at I think that allowed the data to flow out.
Now, this may or may not be a netapp bug, I do not recall. It may behoove you to also update your netApp to a current release and try again.
Be sure you are NOT using NODE-SCOPED ndmp, and you are configured for SVM-SCOPED NDMP
--tmac
--tmac
*Tim McCarthy* *Principal Consultant*
On Tue, Nov 3, 2015 at 4:32 PM, John Stoffel john@stoffel.org wrote:
Hi,
Anyone using Netbackup 7.6.0.1 to backup via three way NDMP, a CIFS share/volume on cDOT inside a VServer? It just ain't working for me. I suspect I need to upgrade to Netbackup 7.7, but before I go that route... I'm looking for other options.
Basically, I want to have the NDMP data flow over the network to the Netbackup server, then from there to Tape. I don't have/want direct attached SAN tape drives at this time on our four node cluster. It's just one single volume I need backed up right now.
Thanks, John _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
-
John Stoffel -
tmac -
Unnikrishnan KP