I am running 8.2 and that is true as well according to documentation. It does not work for me. The only thing i can think of is that my snapmirror is not of the whole volume, but just a qtree level. Could it be that?

Sent from my iPad

On Apr 9, 2014, at 7:31 PM, Eric Peng epeng@esri.com wrote:

I just took the SnapMirror/SnapVault class and have a note on this. According to the instructor, at version 8.2.1, ONTAP will autogrow the destination volume when you grow the source volume. I haven’t tried this to verify. Are you running 8.2.1 (or later)?

Eric

From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Iluhes Sent: Wednesday, April 09, 2014 1:06 PM To: Toasters Subject: snapmirror destination volume is not growing after source

Folks, Please help I have snapmirror setup between 2 qtrees.

netapp1:/vol/vol1/q1 --> netapp2/vol/vol1/q1

I was under impression that in 8.2 you can add space to source volume and destination will grow. When I add space or change maxfile on source, the destination remains the same Is my issue due to having just qtree snapmirror? Or I am missing something? fs_size_fixed=off