Hi folks,
One of my colleagues made a typo on the language for volumes that are used exclusively for LUNs. I know that you can't change the language of a volume, but is there a way to move the LUNs to a new volume with the correct language set?
Thanks!
7-Mode or C-Mode? Which version? cDOT 8.3 supports “lun move”.
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Basil Sent: Monday, July 20, 2015 4:54 PM To: toasters@teaparty.net Subject: Nondisruptively change language of a volume containing LUNs?
Hi folks,
One of my colleagues made a typo on the language for volumes that are used exclusively for LUNs. I know that you can't change the language of a volume, but is there a way to move the LUNs to a new volume with the correct language set?
Thanks!
Sorry, CDOT 8.2.3p4. Can I use LUN move to get a production LUN off a volume so I can delete and recreate it with the right language in 8.3?
On Mon, Jul 20, 2015 at 10:11 AM, Borzenkov, Andrei < andrei.borzenkov@ts.fujitsu.com> wrote:
7-Mode or C-Mode? Which version? cDOT 8.3 supports “lun move”.
*From:* toasters-bounces@teaparty.net [mailto: toasters-bounces@teaparty.net] *On Behalf Of *Basil *Sent:* Monday, July 20, 2015 4:54 PM *To:* toasters@teaparty.net *Subject:* Nondisruptively change language of a volume containing LUNs?
Hi folks,
One of my colleagues made a typo on the language for volumes that are used exclusively for LUNs. I know that you can't change the language of a volume, but is there a way to move the LUNs to a new volume with the correct language set?
Thanks!
Well, documentation says it is non-disruptive and does not say anything about volume language when listing limitations.
LUNs moved across volumes within the SVM are moved immediately and without loss of connectivity.
You cannot move the following types of LUNs: • A LUN that has been created from a file • A LUN that is in NVFail state • A LUN that is in a load-sharing relationship • A protocol-endpoint class LUN
From: Basil [mailto:basilberntsen@gmail.com] Sent: Monday, July 20, 2015 5:39 PM To: Borzenkov, Andrei Cc: toasters@teaparty.net Subject: Re: Nondisruptively change language of a volume containing LUNs?
Sorry, CDOT 8.2.3p4. Can I use LUN move to get a production LUN off a volume so I can delete and recreate it with the right language in 8.3?
On Mon, Jul 20, 2015 at 10:11 AM, Borzenkov, Andrei <andrei.borzenkov@ts.fujitsu.commailto:andrei.borzenkov@ts.fujitsu.com> wrote: 7-Mode or C-Mode? Which version? cDOT 8.3 supports “lun move”.
From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net] On Behalf Of Basil Sent: Monday, July 20, 2015 4:54 PM To: toasters@teaparty.netmailto:toasters@teaparty.net Subject: Nondisruptively change language of a volume containing LUNs?
Hi folks,
One of my colleagues made a typo on the language for volumes that are used exclusively for LUNs. I know that you can't change the language of a volume, but is there a way to move the LUNs to a new volume with the correct language set?
Thanks!
I have an 8.3.1rc1 cluster; if you like I can try it out for you.
From: <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> on behalf of "basilberntsen@gmail.commailto:basilberntsen@gmail.com" <basilberntsen@gmail.commailto:basilberntsen@gmail.com> Date: Monday, July 20, 2015 at 10:52 AM To: "Borzenkov, Andrei" <andrei.borzenkov@ts.fujitsu.commailto:andrei.borzenkov@ts.fujitsu.com> Cc: "toasters@teaparty.netmailto:toasters@teaparty.net" <Toasters@teaparty.netmailto:Toasters@teaparty.net> Subject: Re: Nondisruptively change language of a volume containing LUNs?
Wonderful, thank you! Once we upgrade to 8.3, I'll use this.
Sent from my BlackBerry 10 smartphone on the Bell network. From: Borzenkov, Andrei Sent: Monday, July 20, 2015 10:48 AM To: Basil Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: RE: Nondisruptively change language of a volume containing LUNs?
Well, documentation says it is non-disruptive and does not say anything about volume language when listing limitations.
LUNs moved across volumes within the SVM are moved immediately and without loss of connectivity.
You cannot move the following types of LUNs: * A LUN that has been created from a file * A LUN that is in NVFail state * A LUN that is in a load-sharing relationship * A protocol-endpoint class LUN
From: Basil [mailto:basilberntsen@gmail.com] Sent: Monday, July 20, 2015 5:39 PM To: Borzenkov, Andrei Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: Re: Nondisruptively change language of a volume containing LUNs?
Sorry, CDOT 8.2.3p4. Can I use LUN move to get a production LUN off a volume so I can delete and recreate it with the right language in 8.3?
On Mon, Jul 20, 2015 at 10:11 AM, Borzenkov, Andrei <andrei.borzenkov@ts.fujitsu.commailto:andrei.borzenkov@ts.fujitsu.com> wrote: 7-Mode or C-Mode? Which version? cDOT 8.3 supports "lun move".
From:toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net] On Behalf Of Basil Sent: Monday, July 20, 2015 4:54 PM To: toasters@teaparty.netmailto:toasters@teaparty.net Subject: Nondisruptively change language of a volume containing LUNs?
Hi folks,
One of my colleagues made a typo on the language for volumes that are used exclusively for LUNs. I know that you can't change the language of a volume, but is there a way to move the LUNs to a new volume with the correct language set?
Thanks!
It's OK, I will test it once I upgrade with a nonprod LUN. Thanks for the offer!
On Mon, Jul 20, 2015 at 10:54 AM, Waltham, Christopher < Christopher.Waltham@netapp.com> wrote:
I have an 8.3.1rc1 cluster; if you like I can try it out for you.
From: toasters-bounces@teaparty.net on behalf of " basilberntsen@gmail.com" basilberntsen@gmail.com Date: Monday, July 20, 2015 at 10:52 AM To: "Borzenkov, Andrei" andrei.borzenkov@ts.fujitsu.com Cc: "toasters@teaparty.net" Toasters@teaparty.net Subject: Re: Nondisruptively change language of a volume containing LUNs?
Wonderful, thank you! Once we upgrade to 8.3, I'll use this.
Sent from my BlackBerry 10 smartphone on the Bell network. *From: *Borzenkov, Andrei *Sent: *Monday, July 20, 2015 10:48 AM *To: *Basil *Cc: *toasters@teaparty.net *Subject: *RE: Nondisruptively change language of a volume containing LUNs?
Well, documentation says it is non-disruptive and does not say anything about volume language when listing limitations.
LUNs moved across volumes within the SVM are moved immediately and
without loss of connectivity.
You cannot move the following types of LUNs:
• A LUN that has been created from a file
• A LUN that is in NVFail state
• A LUN that is in a load-sharing relationship
• A protocol-endpoint class LUN
*From:* Basil [mailto:basilberntsen@gmail.com basilberntsen@gmail.com] *Sent:* Monday, July 20, 2015 5:39 PM *To:* Borzenkov, Andrei *Cc:* toasters@teaparty.net *Subject:* Re: Nondisruptively change language of a volume containing LUNs?
Sorry, CDOT 8.2.3p4. Can I use LUN move to get a production LUN off a volume so I can delete and recreate it with the right language in 8.3?
On Mon, Jul 20, 2015 at 10:11 AM, Borzenkov, Andrei < andrei.borzenkov@ts.fujitsu.com> wrote:
7-Mode or C-Mode? Which version? cDOT 8.3 supports “lun move”.
*From:*toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] *On Behalf Of *Basil *Sent:* Monday, July 20, 2015 4:54 PM *To:* toasters@teaparty.net *Subject:* Nondisruptively change language of a volume containing LUNs?
Hi folks,
One of my colleagues made a typo on the language for volumes that are used exclusively for LUNs. I know that you can't change the language of a volume, but is there a way to move the LUNs to a new volume with the correct language set?
Thanks!
-
Basil -
basilberntsen＠gmail.com
-
Borzenkov, Andrei -
Waltham, Christopher