Think this may be a version specific issue, but I’m trying to get client stats out of an 8.2P6 CDOT system, preferably sorted so that I can see the top few clients. I’ve found the above TR by Justin (thanks :) ) but one of the useful commands seems not to work. I’m using “statistics settings modify -client-stats enabled”
and it returns a not found, only reference is that the statistics setting modify command can only change the counter display rate :( Must be a way to do this, or do I have to try and write something?
Got a bit of help from Douglas’ comments here yesterday, but still struggling….
~Mark
mark.flint@sanger.ac.uk
Hi Mark,
did you notice the star at the prompt? "cluster::*> statistics settings modify -client-stats enabled"
That means, he was in "advanced" or "diag" mode, when he typed the command... (As far as I can tell, he doesn't mention which one, but he changes the priviledge level in previous chapters, e.g. when discussing 'secd') I don't have a 8.2P6 system at hand to verify, but I'm pretty sure the command will work if you go to advanced or diag mode...
HTH
Sebastian
On 7/1/2015 12:04 PM, Mark Flint wrote:
Think this may be a version specific issue, but I’m trying to get client stats out of an 8.2P6 CDOT system, preferably sorted so that I can see the top few clients. I’ve found the above TR by Justin (thanks :) ) but one of the useful commands seems not to work. I’m using “statistics settings modify -client-stats enabled”
and it returns a not found, only reference is that the statistics setting modify command can only change the counter display rate :( Must be a way to do this, or do I have to try and write something?
Got a bit of help from Douglas’ comments here yesterday, but still struggling….
~Mark
mark.flint@sanger.ac.uk mailto:mark.flint@sanger.ac.uk
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
cluster1::*> statistics settings modify -client-stats enabled
Error: invalid argument "-client-stats"
cluster1::*> statistics settings modify ? [-display-rates] {true|false} Display Rates
Yes, thanks Sebastian :)
~Mark
mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:23, Sebastian Goetze spgoetze@gmail.com wrote:
Hi Mark,
did you notice the star at the prompt? "cluster::*> statistics settings modify -client-stats enabled"
That means, he was in "advanced" or "diag" mode, when he typed the command... (As far as I can tell, he doesn't mention which one, but he changes the priviledge level in previous chapters, e.g. when discussing 'secd') I don't have a 8.2P6 system at hand to verify, but I'm pretty sure the command will work if you go to advanced or diag mode...
HTH
Sebastian
On 7/1/2015 12:04 PM, Mark Flint wrote:
Think this may be a version specific issue, but I’m trying to get client stats out of an 8.2P6 CDOT system, preferably sorted so that I can see the top few clients. I’ve found the above TR by Justin (thanks :) ) but one of the useful commands seems not to work. I’m using “statistics settings modify -client-stats enabled”
and it returns a not found, only reference is that the statistics setting modify command can only change the counter display rate :( Must be a way to do this, or do I have to try and write something?
Got a bit of help from Douglas’ comments here yesterday, but still struggling….
~Mark
mark.flint@sanger.ac.uk
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Well, in 'diag' (and 8.3RC1) it works:
c83-PC::> set dia
Warning: These diagnostic commands are for use by NetApp personnel only.
Do you want to continue? {y|n}: y
c83-PC::*> stat set mod ?
(statistics settings modify)
[[-display-rates] {true|false}] *Display Rates
[ -client-stats {enabled|disabled} ] *Collect Per-Client Statistics
[ -max-clients-to-view {1..10240} ] *Specify the Max Number of Clients to View
[ -max-clients-to-collect {1..10240} ] *Specify the Max Number of Clients to
Collect
[ -counter-display {Counter Display full|non-zero|none|all} ] *Counter Display Value
[ -counter-display-units {Counter Units B|KB|MB|GB} ] *Counter Display Units
[ -display-count-exponent {0..10} ] *Display Count Exponent
Sebastian
On 7/1/2015 12:25 PM, Mark Flint wrote:
*cluster1::*> statistics settings modify -client-stats enabled*
*Error: invalid argument "-client-stats"*
*cluster1::*> statistics settings modify ?*
- [-display-rates] {true|false} Display Rates*
Yes, thanks Sebastian :)
~Mark
mark.flint@sanger.ac.uk mailto:mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:23, Sebastian Goetze <spgoetze@gmail.com mailto:spgoetze@gmail.com> wrote:
Hi Mark,
did you notice the star at the prompt? "cluster::*> statistics settings modify -client-stats enabled"
That means, he was in "advanced" or "diag" mode, when he typed the command... (As far as I can tell, he doesn't mention which one, but he changes the priviledge level in previous chapters, e.g. when discussing 'secd') I don't have a 8.2P6 system at hand to verify, but I'm pretty sure the command will work if you go to advanced or diag mode...
HTH
Sebastian
On 7/1/2015 12:04 PM, Mark Flint wrote:
Think this may be a version specific issue, but I’m trying to get client stats out of an 8.2P6 CDOT system, preferably sorted so that I can see the top few clients. I’ve found the above TR by Justin (thanks :) ) but one of the useful commands seems not to work. I’m using “statistics settings modify -client-stats enabled”
and it returns a not found, only reference is that the statistics setting modify command can only change the counter display rate :( Must be a way to do this, or do I have to try and write something?
Got a bit of help from Douglas’ comments here yesterday, but still struggling….
~Mark
mark.flint@sanger.ac.uk
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Apologies, you’re correct :) I was in advanced, not diag!
~Mark
mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:30, Sebastian Goetze spgoetze@gmail.com wrote:
Well, in 'diag' (and 8.3RC1) it works: c83-PC::> set dia Warning: These diagnostic commands are for use by NetApp personnel only. Do you want to continue? {y|n}: y c83-PC::*> stat set mod ? (statistics settings modify) [[-display-rates] {true|false}] *Display Rates [ -client-stats {enabled|disabled} ] *Collect Per-Client Statistics [ -max-clients-to-view {1..10240} ] *Specify the Max Number of Clients to View [ -max-clients-to-collect {1..10240} ] *Specify the Max Number of Clients to Collect [ -counter-display {Counter Display full|non-zero|none|all} ] *Counter Display Value [ -counter-display-units {Counter Units B|KB|MB|GB} ] *Counter Display Units [ -display-count-exponent {0..10} ] *Display Count Exponent
Sebastian
On 7/1/2015 12:25 PM, Mark Flint wrote:
cluster1::*> statistics settings modify -client-stats enabled
Error: invalid argument "-client-stats"
cluster1::*> statistics settings modify ? [-display-rates] {true|false} Display Rates
Yes, thanks Sebastian :)
~Mark
mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:23, Sebastian Goetze spgoetze@gmail.com wrote:
Hi Mark,
did you notice the star at the prompt? "cluster::*> statistics settings modify -client-stats enabled"
That means, he was in "advanced" or "diag" mode, when he typed the command... (As far as I can tell, he doesn't mention which one, but he changes the priviledge level in previous chapters, e.g. when discussing 'secd') I don't have a 8.2P6 system at hand to verify, but I'm pretty sure the command will work if you go to advanced or diag mode...
HTH
Sebastian
On 7/1/2015 12:04 PM, Mark Flint wrote:
Think this may be a version specific issue, but I’m trying to get client stats out of an 8.2P6 CDOT system, preferably sorted so that I can see the top few clients. I’ve found the above TR by Justin (thanks :) ) but one of the useful commands seems not to work. I’m using “statistics settings modify -client-stats enabled”
and it returns a not found, only reference is that the statistics setting modify command can only change the counter display rate :( Must be a way to do this, or do I have to try and write something?
Got a bit of help from Douglas’ comments here yesterday, but still struggling….
~Mark
mark.flint@sanger.ac.uk
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
I've noted that the doc needs to be updated to include which priv level you are in. Will be in the next update, which will be out soon. Sorry for the confusion. :)
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Mark Flint Sent: Wednesday, July 01, 2015 7:04 AM To: Sebastian Goetze Cc: Toasters Subject: Re: NFS & TR4067
Apologies, you're correct :) I was in advanced, not diag!
~Mark
mark.flint@sanger.ac.ukmailto:mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:30, Sebastian Goetze <spgoetze@gmail.commailto:spgoetze@gmail.com> wrote:
Well, in 'diag' (and 8.3RC1) it works:
c83-PC::> set dia
Warning: These diagnostic commands are for use by NetApp personnel only.
Do you want to continue? {y|n}: y
c83-PC::*> stat set mod ?
(statistics settings modify)
[[-display-rates] {true|false}] *Display Rates
[ -client-stats {enabled|disabled} ] *Collect Per-Client Statistics
[ -max-clients-to-view {1..10240} ] *Specify the Max Number of Clients to View
[ -max-clients-to-collect {1..10240} ] *Specify the Max Number of Clients to
Collect
[ -counter-display {Counter Display full|non-zero|none|all} ] *Counter Display Value
[ -counter-display-units {Counter Units B|KB|MB|GB} ] *Counter Display Units
[ -display-count-exponent {0..10} ] *Display Count Exponent
Sebastian On 7/1/2015 12:25 PM, Mark Flint wrote: cluster1::*> statistics settings modify -client-stats enabled
Error: invalid argument "-client-stats"
cluster1::*> statistics settings modify ? [-display-rates] {true|false} Display Rates
Yes, thanks Sebastian :)
~Mark
mark.flint@sanger.ac.ukmailto:mark.flint@sanger.ac.uk Principal Systems Administrator IMT Storage & Backups
On 1 Jul 2015, at 11:23, Sebastian Goetze <spgoetze@gmail.commailto:spgoetze@gmail.com> wrote:
Hi Mark,
did you notice the star at the prompt? "cluster::*> statistics settings modify -client-stats enabled"
That means, he was in "advanced" or "diag" mode, when he typed the command... (As far as I can tell, he doesn't mention which one, but he changes the priviledge level in previous chapters, e.g. when discussing 'secd') I don't have a 8.2P6 system at hand to verify, but I'm pretty sure the command will work if you go to advanced or diag mode...
HTH
Sebastian
On 7/1/2015 12:04 PM, Mark Flint wrote: Think this may be a version specific issue, but I'm trying to get client stats out of an 8.2P6 CDOT system, preferably sorted so that I can see the top few clients. I've found the above TR by Justin (thanks :) ) but one of the useful commands seems not to work. I'm using "statistics settings modify -client-stats enabled"
and it returns a not found, only reference is that the statistics setting modify command can only change the counter display rate :( Must be a way to do this, or do I have to try and write something?
Got a bit of help from Douglas' comments here yesterday, but still struggling....
~Mark
mark.flint@sanger.ac.ukmailto:mark.flint@sanger.ac.uk
_______________________________________________
Toasters mailing list
Toasters@teaparty.netmailto:Toasters@teaparty.net
-
Mark Flint -
Parisi, Justin -
Sebastian Goetze