Download ³Config Advisor² from the support site, I _think_ that it¹s available to customers as well as partners. That¹ll give you a good high-level overview of whether stuff is configured correctly. Also in the MyAutosupport section of the support website it will give you advice and high-level visibility of performance, and software revisions, etc...

On 11/02/2015 11:29, "Camillo Gornati" cams1976@gmail.com wrote:

Hi all, today in the morning we had a little issue with our time sync, causing the CIFS service to stop working.

Now that everything is back to normal, i would like to check with you guys how can check if my filer is 100% ok?

We hava a FAS2040 (dual head fully licensed) 2 DS4243 24 disks on it.

I want to know if in case of a hardware failure my my system will still be online, redundant.

I am kind of new to netapp and assumed this system recently, hasn¹t been configured by me.

Any help will do it..

Thanks

C.

---

Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters

Ed Morgan Technical Consultant

T: M:07875 628794 E: ed.morgan@ansgroup.co.uk

Disclaimer The information contained in this communication from ed.morgan@ansgroup.co.uk sent at 2015-02-1111:40:31 is confidential and may be legally privileged. It is intended solely for use by toasters@teaparty.net and others authorised to receive it. If you are not toasters@teaparty.net you are hereby notified that any disclosure, copying,distribution or taking action in reliance of the contents of this information is strictly prohibited and may be unlawful. ANS Group Plc Terms & Conditions apply, all prices are subject to VAT, expenses excluded,E&O,E.

ANS Group Plc, Registered Office is Synergy House, Manchester Science Park, Manchester, M15 6SY. Reg No. 3176761. (Registered in England & Wales)

cf status will tell you if failover is available, probably worth checking your network config supports that too, ifconfig -a will show you your network interfaces.

~Mark

mark.flint@sanger.ac.uk

On 11 Feb 2015, at 11:29, Camillo Gornati cams1976@gmail.com wrote:

Hi all, today in the morning we had a little issue with our time sync, causing the CIFS service to stop working.

Now that everything is back to normal, i would like to check with you guys how can check if my filer is 100% ok?

We hava a FAS2040 (dual head fully licensed) 2 DS4243 24 disks on it.

I want to know if in case of a hardware failure my my system will still be online, redundant.

I am kind of new to netapp and assumed this system recently, hasn’t been configured by me.

Any help will do it..

Thanks

C.

---

Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters