Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
Minor OS "downgrade" is as simple as installing the older filer i.e. 7.2.z -> 7.2.y
Major OS "downgrade" is more complex...
to go from 7.2 .x- 7.1.x (install and download 7.1.x) revert_7.1
--tmac On Dec 10, 2007 8:39 AM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
Great!
Thanks
Da: tmac [mailto:tmacmd@gmail.com] Inviato: lunedì 10 dicembre 2007 15.18 A: Milazzo Giacomo Cc: toasters@mathworks.com Oggetto: Re: Data Ontap "downgrade"
Minor OS "downgrade" is as simple as installing the older filer i.e. 7.2.z -> 7.2.y
Major OS "downgrade" is more complex...
to go from 7.2 .x- 7.1.x (install and download 7.1.x) revert_7.1
--tmac
On Dec 10, 2007 8:39 AM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
Hi Milazzo,
The command you are looking for is revert_to, which downgrades WAFL.
It's part of the upgrade guide, you should be able to find tons of info there.
Kind regards,
Nils
On Dec 10, 2007 2:39 PM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
did this the other week to get rid of a cifs bug.No need for a revert to command as it's a downgrade between minor releases, just did a unzip,download and reboot
regards John
Milazzo Giacomo wrote:
Hi All
Maybe is a simple question for most of you but I’ve never done before and I want to be sure J
I’m going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I’ve seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the “download” command and a reboot as an “upgrade”? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
Hi Giacomo,
To revert to 7.2.2 you first need to do a "download" en then use the "revert_to 7.2.2" command before rebooting your filer.
On Dec 10, 2007 2:39 PM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
One voice out of the choir :-) Download + revert_to or simply download/reboot?
-----Messaggio originale----- Da: Bob Doho [mailto:bob.doho@gmail.com] Inviato: lunedì 10 dicembre 2007 15.47 A: Milazzo Giacomo Cc: toasters@mathworks.com Oggetto: Re: Data Ontap "downgrade"
Hi Giacomo,
To revert to 7.2.2 you first need to do a "download" en then use the "revert_to 7.2.2" command before rebooting your filer.
On Dec 10, 2007 2:39 PM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before and I want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running 7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I remember some special command to apply after the unzip/download phase of the preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply unzip the 7.2.2, living them the "download" command and a reboot as an "upgrade"? Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
NO NO NO...
You only need to install the 7.2.2 (if in fact you are running 7.2.3)
Then download then reboot.
No need for revert_to
--tmac
On Dec 10, 2007 9:46 AM, Bob Doho bob.doho@gmail.com wrote:
Hi Giacomo,
To revert to 7.2.2 you first need to do a "download" en then use the "revert_to 7.2.2" command before rebooting your filer.
On Dec 10, 2007 2:39 PM, Milazzo Giacomo G.Milazzo@sinergy.it wrote:
Hi All
Maybe is a simple question for most of you but I've never done before
and I
want to be sure J
I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror (bidirectional) compliance to another 6030HA system already running
7.2.2
I've seen times ago a similar operation performed from a 7.2 to a 7.1and I remember some special command to apply after the unzip/download phase of
the
preceding Data Ontap release.
Is it so? I mean, there are special commands on cli or should I simply
unzip
the 7.2.2, living them the "download" command and a reboot as an
"upgrade"?
Or is there something other.
My 6030HA is a NEW system, no volumes or other aggregate other that the aggr0/vol0 for the os
Regards
-
Bob Doho -
John Files -
Milazzo Giacomo -
Nils Vogels -
tmac