On Dec 10, 2007 9:46 AM, Bob Doho < bob.doho@gmail.com> wrote:

Hi Giacomo,

To revert to 7.2.2 you first need to do a "download" en then use the
"revert_to 7.2.2" command before rebooting your filer.

On Dec 10, 2007 2:39 PM, Milazzo Giacomo < G.Milazzo@sinergy.it> wrote:
>
>
>
> Hi All
>
>
>
> Maybe is a simple question for most of you but I've never done before and I
> want to be sure J
>
> I'm going to revert a 6030HA from 7.2.3 to 7.2.2 for Snapmirror
> (bidirectional) compliance to another 6030HA system already running 7.2.2
>
>
>
> I've seen times ago a similar operation performed from a 7.2 to a 7.1 and I
> remember some special command to apply after the unzip/download phase of the
> preceding Data Ontap release.
>
>
>
> Is it so? I mean, there are special commands on cli or should I simply unzip
> the 7.2.2, living them the "download" command and a reboot as an "upgrade"?
> Or is there something other.
>
>
>
> My 6030HA is a NEW system, no volumes or other aggregate other that the
> aggr0/vol0 for the os
>
>
>
> Regards