Hi mark,

You can shuffle as much as you want. That's no problem. It's ofcourse important that you look at the shelfs ID's.

Best regards,

Reinoud

-----Original Message----- From: owner-toasters@mathworks.com owner-toasters@mathworks.com To: toasters@mathworks.com toasters@mathworks.com Sent: Fri Jun 16 21:44:17 2006 Subject: Move shelf between fiber loops.

First post on list.

I have a F760 with 8 FC-9 shelves. Running ONTAP 6.5.2R1. I want to add one more shelf. I see 8 on a fiber channel is max so I need to first install a second fiber loop.

Instead of having 8 shelves on more fiber channel and 1 on the 2nd FC it seems logical that I should distribute the disks shelves over the two fiber channels. Question is if I move a disk shelf from one fiber loop to another will the OS find all the volumes on boot. Or is there something I must do configuration wise.

Thanks mark