Hi mark,

You can shuffle as much as you want. That's no problem. It's ofcourse important that you look at the shelfs ID's.

Best regards,

Reinoud

-----Original Message-----
From: owner-toasters@mathworks.com <owner-toasters@mathworks.com>
To: toasters@mathworks.com <toasters@mathworks.com>
Sent: Fri Jun 16 21:44:17 2006
Subject: Move shelf between fiber loops.

First post on list.

I have a F760 with 8 FC-9 shelves.  Running ONTAP 6.5.2R1.  I want to add
one more shelf.  I see 8 on a fiber channel is max so I need to first
install a second fiber loop.

Instead of having 8 shelves on more fiber channel and 1 on the 2nd FC it
seems logical that I should distribute the disks shelves over the two fiber
channels.  Question is if I move a disk shelf from one fiber loop to another
will the OS find all the volumes on boot.  Or is there something I must do
configuration wise.

Thanks
mark
--