Hello All,

Thanks your all of your help. The problem is that the DLT drive is and SE interface while the F760 is a Fast Wide Differential interface. Now for the next question. How would I get this thing to work with my F760. Is there another card I can buy for the Net App?

Thanks

Blake ----- Original Message ----- From: Steve Roche To: 'Blake Folgner' Sent: Wednesday, May 01, 2002 1:10 PM Subject: RE: Adic FastStore DLT

Check to see if you Autoloader has a single ended SCSI interface. The F7XX Series Filers shipped out of the box with a Fast Wide Differential interface. Connecting that to a SE interface will hang the Filer.

Seen it many times in the past.

-----Original Message----- From: Blake Folgner [mailto:admin@webrunners.com] Sent: Wednesday, May 01, 2002 3:31 PM To: toasters@mathworks.com Subject: Adic FastStore DLT

Hello,

I'm trying to get my Adic FastStore 22 tape autoloader to work with my F760 i'm running 6.2.1. I set the loaders SCSI ID to 0 and the drive to 1 and I have also tried other combinations also, keeping in mind that the SCSI card in the F760 uses ID 7. When I boot the filer up it just hangs after it checks the memory. If I unplug the autoloader it boots up with no problems. The autoloader is terminated and all connections are good. Any help would be very appreciated.

Thanks for your help.

Blake