Hello All,
My F630 has generated these errors below. The Filer is running 6.1.2 and it's in a CIFS environment only. Any Ideas?
Wed Aug 14 09:30:04 GMT [raid_xor_server:CRITICAL]: 1 CORR PROC ERR 86 eia:a011720 fs:94 eis:c5000000 isr:100000000 CPU ECC error on SIMM=J100, Address=ffffff000a01172f Wed Aug 14 10:00:00 GMT [kern.uptime.filer:info]: 10:00am up 4 days, 16:33 0 NFS ops, 383717 CIFS ops, 238 HTTP ops Wed Aug 14 11:00:00 GMT [kern.uptime.filer:info]: 11:00am up 4 days, 17:33 0 NFS ops, 385292 CIFS ops, 238 HTTP ops Wed Aug 14 12:00:00 GMT [kern.uptime.filer:info]: 12:00pm up 4 days, 18:33 0 NFS ops, 386935 CIFS ops, 238 HTTP ops Wed Aug 14 12:00:01 GMT [sk.panic:ALERT]: reason="MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Release 6.1.2" Wed Aug 14 12:00:01 GMT [sk.assert:ALERT]: file="../driver/scsi/scsi.c", line="1309", expr="NULL" Wed Aug 14 12:00:01 GMT [sk.assert:ALERT]: file="../driver/scsi/scsi.c", line="1309", expr="NULL" Wed Aug 14 12:03:30 GMT [kern.syslog.msg:info]: Ethernet e10a: Link up. Wed Aug 14 12:03:31 GMT [mgr.boot.oldOFW:error]: The current boot firmware version is too old. Please upgrade to version 2.3. Wed Aug 14 12:03:31 GMT [kern.syslog.msg:warning]: Updated boot firmware is available on the Network Appliance NOW site (now.netapp.com). Wed Aug 14 12:03:32 GMT [kern.syslog.msg:info]: Replayed 0 checksum entries Wed Aug 14 12:03:33 GMT [kern.syslog.msg:ALERT]: relog syslog PANIC: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Rel Wed Aug 14 12:03:35 GMT [kern.syslog.msg:ALERT]: Language not set on volume vol0. Using language config "C". Use vol lang to set language. Wed Aug 14 12:03:35 GMT [kern.syslog.msg:notice]: The system was down for 191 seconds Wed Aug 14 12:03:38 GMT [dyn_dev_qual_admin:info]: Firmware is up-to-date on all disk drives Wed Aug 14 12:03:38 GMT [rc:info]: Ethernet e10a: Link up. Wed Aug 14 12:03:38 GMT [rc:info]: relog syslog Wed Aug 14 12:00:01 GMT [wafl_hipri:CRITICAL]: 3 CORR PROC ERR 86 eia:117e0 fs:3 eis:1c5000000 isr:100000000 CPU ECC e Wed Aug 14 12:03:38 GMT [rc:ALERT]: relog syslog PANIC: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Rel Wed Aug 14 12:03:38 GMT [rc:info]: sysconfig: Note: Model F630 has no configuration rules. Wed Aug 14 12:03:38 GMT [mgr.boot.disk_done:info]: NetApp Release 6.1.2 boot complete. Last disk update written at Wed Aug 14 11:59:51 GMT 2002 Wed Aug 14 12:03:38 GMT [mgr.boot.reason_abnormal:ALERT]: System rebooted due to a watchdog reset. Wed Aug 14 12:03:38 GMT [mgr.stack.saved:notice]: Reboot with saved panic information in log file Wed Aug 14 12:03:38 GMT [mgr.stack.string:notice]: Panic string: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Release 6.1.2 Wed Aug 14 12:03:38 GMT [mgr.stack.at:notice]: Panic occurred at: Wed Aug 14 12:00:01 2002 Wed Aug 14 12:03:38 GMT [mgr.stack.proc:notice]: Panic in process: wafl_hipri Wed Aug 14 12:03:38 GMT [mgr.stack.noFrames:notice]: No stack frames available
Thanks,
Blake
On Wed, Aug 14, 2002 at 01:58:34PM -0700, Blake Folgner wrote:
Hello All,
My F630 has generated these errors below. The Filer is running 6.1.2 and it's in a CIFS environment only. Any Ideas?
Wed Aug 14 09:30:04 GMT [raid_xor_server:CRITICAL]: 1 CORR PROC ERR 86 eia:a011720 fs:94 eis:c5000000 isr:100000000 CPU ECC error on SIMM=J100, Address=ffffff000a01172f
Looks like a problem with a stick of RAM.
But I don't work for NetApp so I could be wrong.
On 2002-08-14 (13:58, -0700), Blake Folgner blake@webrunners.com wrote:
Hello All,
My F630 has generated these errors below. The Filer is running 6.1.2 and it's in a CIFS environment only. Any Ideas?
Wed Aug 14 09:30:04 GMT [raid_xor_server:CRITICAL]: 1 CORR PROC ERR 86 eia:a011720 fs:94 eis:c5000000 isr:100000000 CPU ECC error on SIMM=J100, Address=ffffff000a01172f [wafl_hipri:CRITICAL]: 3 CORR PROC ERR 86 eia:117e0 fs:3 eis:1c5000000 isr:100000000 CPU ECC e Wed Aug 14 12:03:38 GMT [rc:ALERT]: relog syslog PANIC: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Rel Wed Aug 14 12:03:38 GMT [mgr.stack.string:notice]: Panic string: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Release 6.1.2 Wed Aug 14 12:03:38 GMT [mgr.stack.at:notice]: Panic occurred at: Wed Aug 14 12:00:01 2002 Wed Aug 14 12:03:38 GMT [mgr.stack.proc:notice]: Panic in process: wafl_hipri Wed Aug 14 12:03:38 GMT [mgr.stack.noFrames:notice]: No stack frames available
Login to now.netapp.com, grab the diagnostic disk (in download -> tools) section and run some RAM-diag tests. (to do that you have to shut down your filer, boot from disk and run into diag-mode - the filer can't handle CIFS/NFS/whatever connections during that time so running that tests means down time but can help a lot)
Greetings,
Call NetApp support and send them the core dump. They will tell you exactly why it panicked, if there is a fix they will tell you the revision of ONTAP to install and if not they will send the bug to the developers to fix.
Service contracts.. that's why you buy them. :-)
On Thu, 15 Aug 2002, Stefan Funke wrote:
On 2002-08-14 (13:58, -0700), Blake Folgner blake@webrunners.com wrote:
Hello All,
My F630 has generated these errors below. The Filer is running 6.1.2 and it's in a CIFS environment only. Any Ideas?
Wed Aug 14 09:30:04 GMT [raid_xor_server:CRITICAL]: 1 CORR PROC ERR 86 eia:a011720 fs:94 eis:c5000000 isr:100000000 CPU ECC error on SIMM=J100, Address=ffffff000a01172f [wafl_hipri:CRITICAL]: 3 CORR PROC ERR 86 eia:117e0 fs:3 eis:1c5000000 isr:100000000 CPU ECC e Wed Aug 14 12:03:38 GMT [rc:ALERT]: relog syslog PANIC: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Rel Wed Aug 14 12:03:38 GMT [mgr.stack.string:notice]: Panic string: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Release 6.1.2 Wed Aug 14 12:03:38 GMT [mgr.stack.at:notice]: Panic occurred at: Wed Aug 14 12:00:01 2002 Wed Aug 14 12:03:38 GMT [mgr.stack.proc:notice]: Panic in process: wafl_hipri Wed Aug 14 12:03:38 GMT [mgr.stack.noFrames:notice]: No stack frames available
Login to now.netapp.com, grab the diagnostic disk (in download -> tools) section and run some RAM-diag tests. (to do that you have to shut down your filer, boot from disk and run into diag-mode - the filer can't handle CIFS/NFS/whatever connections during that time so running that tests means down time but can help a lot)
Greetings,