Hello All,

 

  My F630 has generated these errors below. The Filer is running 6.1.2 and it’s in a CIFS environment only.   Any Ideas? 

 

 

Wed Aug 14 09:30:04 GMT [raid_xor_server:CRITICAL]: 1 CORR PROC ERR 86 eia:a011720 fs:94 eis:c5000000 isr:100000000 CPU ECC error on SIMM=J100, Address=ffffff000a01172f
Wed Aug 14 10:00:00 GMT [kern.uptime.filer:info]:  10:00am up  4 days, 16:33 0 NFS ops, 383717 CIFS ops, 238 HTTP ops
Wed Aug 14 11:00:00 GMT [kern.uptime.filer:info]:  11:00am up  4 days, 17:33 0 NFS ops, 385292 CIFS ops, 238 HTTP ops
Wed Aug 14 12:00:00 GMT [kern.uptime.filer:info]:  12:00pm up  4 days, 18:33 0 NFS ops, 386935 CIFS ops, 238 HTTP ops
Wed Aug 14 12:00:01 GMT [sk.panic:ALERT]: reason="MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Release 6.1.2"
Wed Aug 14 12:00:01 GMT [sk.assert:ALERT]: file="../driver/scsi/scsi.c", line="1309", expr="NULL"
Wed Aug 14 12:00:01 GMT [sk.assert:ALERT]: file="../driver/scsi/scsi.c", line="1309", expr="NULL"
Wed Aug 14 12:03:30 GMT [kern.syslog.msg:info]: Ethernet e10a: Link up.
Wed Aug 14 12:03:31 GMT [mgr.boot.oldOFW:error]: The current boot firmware version is too old. Please upgrade to version 2.3.
Wed Aug 14 12:03:31 GMT [kern.syslog.msg:warning]: Updated boot firmware is available on the Network Appliance NOW site (now.netapp.com).
Wed Aug 14 12:03:32 GMT [kern.syslog.msg:info]: Replayed 0 checksum entries
Wed Aug 14 12:03:33 GMT [kern.syslog.msg:ALERT]: relog syslog PANIC: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Rel
Wed Aug 14 12:03:35 GMT [kern.syslog.msg:ALERT]: Language not set on volume vol0. Using language config "C". Use vol lang to set language.
Wed Aug 14 12:03:35 GMT [kern.syslog.msg:notice]: The system was down for 191 seconds
Wed Aug 14 12:03:38 GMT [dyn_dev_qual_admin:info]: Firmware is up-to-date on all disk drives
Wed Aug 14 12:03:38 GMT [rc:info]: Ethernet e10a: Link up.
Wed Aug 14 12:03:38 GMT [rc:info]: relog syslog Wed Aug 14 12:00:01 GMT [wafl_hipri:CRITICAL]: 3 CORR PROC ERR 86 eia:117e0 fs:3 eis:1c5000000 isr:100000000 CPU ECC e
Wed Aug 14 12:03:38 GMT [rc:ALERT]: relog syslog PANIC: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Rel
Wed Aug 14 12:03:38 GMT [rc:info]: sysconfig: Note: Model F630 has no configuration rules.
Wed Aug 14 12:03:38 GMT [mgr.boot.disk_done:info]: NetApp Release 6.1.2 boot complete.  Last disk update written at Wed Aug 14 11:59:51 GMT 2002
Wed Aug 14 12:03:38 GMT [mgr.boot.reason_abnormal:ALERT]: System rebooted due to a watchdog reset.
Wed Aug 14 12:03:38 GMT [mgr.stack.saved:notice]: Reboot with saved panic information in log file
Wed Aug 14 12:03:38 GMT [mgr.stack.string:notice]: Panic string: MM fault MMCSR=1, type=0, VA=0x0, PC=0xfffffc00000110d8, RA=0x55360 in process wafl_hipri on release NetApp Release 6.1.2
Wed Aug 14 12:03:38 GMT [mgr.stack.at:notice]: Panic occurred at: Wed Aug 14 12:00:01  2002
Wed Aug 14 12:03:38 GMT [mgr.stack.proc:notice]: Panic in process: wafl_hipri
Wed Aug 14 12:03:38 GMT [mgr.stack.noFrames:notice]: No stack frames available

 

 

Thanks,

 

Blake