wafle scan measure layout will check the amount of defragmention in a volume. It will return a value (lowest the better). A high number is indicative of defragmentation.

If high then a walf iron we defrag the raid group/s in the volume.

________________________________

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Alfred Lim Sent: Sunday, 23 January 2005 3:32 AM To: SKIP HOFMANN; 'Michael Christian'; toasters@mathworks.com Subject: Re: wafle scan measure layout

Hi.

How much does it help with that command?

----- Original Message -----

From: SKIP HOFMANN mailto:SKIP.HOFMANN@ttisg.com

To: 'Michael Christian' mailto:mchristi@yahoo-inc.com ; toasters@mathworks.com

Sent: Saturday, January 22, 2005 5:10 AM

Subject: RE: wafle scan measure layout

Cool thanks to all. I think I got around 50 emails from this newsgroup on how to do this. I sure won't forget how to do this again.

________________________________

From: Michael Christian [mailto:mchristi@yahoo-inc.com] Sent: Friday, January 21, 2005 12:59 PM To: SKIP HOFMANN; toasters@mathworks.com Subject: RE: wafle scan measure layout

priv set advanced

________________________________

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of SKIP HOFMANN Sent: Friday, January 21, 2005 11:42 AM To: toasters@mathworks.com Subject: wafle scan measure layout

Hi all

How do I get into the advanced mode so I can run this command?

Skip Hofmann

Senior Network Administrator

MCSE 2000 NT MCP+I

TetraTech

Skip.Hofmann@ttisg.com

949 500 5286 cell

949 608 5801 office