wafle scan measure layout will check the amount of defragmention in a volume. It will return a value (lowest the better). A high number is indicative of defragmentation.

 

If high then a walf iron we defrag the raid group/s in the volume.

 

 

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Alfred Lim
Sent: Sunday, 23 January 2005 3:32 AM
To: SKIP HOFMANN; 'Michael Christian'; toasters@mathworks.com
Subject: Re: wafle scan measure layout

 

Hi.

 

How much does it help with that command?

 

----- Original Message -----

From: SKIP HOFMANN

To: 'Michael Christian' ; toasters@mathworks.com

Sent: Saturday, January 22, 2005 5:10 AM

Subject: RE: wafle scan measure layout

 

Cool thanks to all. I think I got around 50 emails from this newsgroup on how to do this. I sure won't forget how to do this again.

 

 

 

From: Michael Christian [mailto:mchristi@yahoo-inc.com]
Sent: Friday, January 21, 2005 12:59 PM
To: SKIP HOFMANN; toasters@mathworks.com
Subject: RE: wafle scan measure layout

 

priv set advanced

 

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of SKIP HOFMANN
Sent: Friday, January 21, 2005 11:42 AM
To: toasters@mathworks.com
Subject: wafle scan measure layout

 

Hi all

 

How do I get into the advanced mode so I can run this command?

 

 

 

Skip Hofmann

Senior Network Administrator

MCSE 2000 NT MCP+I

TetraTech

Skip.Hofmann@ttisg.com

949 500 5286 cell

949 608 5801 office