toasters

toasters@lists.teaparty.net

13531 discussions

RE: sem-OT : rj45->db9 pin-out to connect to netapps console port
by DFinn＠studentadvantage.com 20 May '03

20 May '03

That's strange. I tried one of those and it didn't work. It's a black rj45->db9 connector labeled TERMINAL and it's the one I was using to attach to the serial port of a laptop to console into the cisco. I know the console port on the netapp works fine though because I can get into that with a serial cable and a laptop. -----Original Message----- From: Jason.Santos(a)pinnaclewest.com To: DFinn(a)studentadvantage.com Sent: 5/19/03 1:52 PM Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port They are pinned out the same as the adapters that came with the 2511 (labeled Terminal, I think). I have some at home, don't have one here, I can e-mail you later if you still didn't find it. -- Jason Santos Sr. Unix System Administrator APS/Pinnacle West Phoenix, AZ USA -----Original Message----- From: DFinn(a)studentadvantage.com [mailto:DFinn@studentadvantage.com] Sent: Monday, May 19, 2003 10:32 AM To: toasters(a)mathworks.com Subject: sem-OT : rj45->db9 pin-out to connect to netapps console port I've decided to try and use the Cisco 2511-RJ that we currently have in place for our sun gear and connect the netapps to that for network console connections. I picked up some rj45->db9 connectors that need to be pin'd out. Does anyone know how these are pin'd out offhand? Thanks Dan

2 1

useradmin command
by Robert Borowicz 20 May '03

20 May '03

I'm using the "useradmin" command to add users to my DOT 6.3.1 for CIFS authen since I don't have a DC. Unfortunately these users also become Filer Administrators and I have to be very careful not to let them onto the box. I'm looking at how to handle password administration for these users without letting them have a telnet session. Anybody use a "rsh" script to administers these user accounts? Any ideas how I can limit them? The only thing I've come up with is having our manned Help Desk administer a telnet session for them while the user is physically in the Help Desk area. Ideas? -Bob

1 0

Blast from the past. 5.3.1D9
by Jaye Mathisen 19 May '03

19 May '03

I have an old filer that we just didn't do much with. I powered it up, and it's crashing with a panic in wafl. Read a bug report that it is fixed in 5.3.1D9. The filer has 5.3.1 on it. I have the 5.3.1D9 tar files and stuff, but I believe the install uses the regular 5.3.1 disks. Are there any ways to get the 5.3.1D9 kernel on the floppy so I can boot it and let the wafl log finish getting replayed? There's nothing on there that's too critical, but I just want to double check.

1 0

RE: sem-OT : rj45->db9 pin-out to connect to netapps console port
by Reeves, Gary 19 May '03

19 May '03

Try this works for me Computers and terminals are typically DTE (Data Terminal Equipment) devices. DTE Adapter Wiring DB-9 DB-25 Signal Function Adapter RJ-45 8 5 CTS Clear To Send Blue 1 1 8 DCD Data Carrier Detect Orange 2 2 3 RD Received Data Black 3 5 7 SG Signal Ground Red 4 5 7 SG Signal Ground Green 5 3 2 TD Transmitted Data Yellow 6 4 20 DTR Data Terminal Ready Brown 7 7 4 RTS Request To Send White 8 6 6 DSR Data Set Ready - - (see notes below ) 9 22 RI Ring Indicator - - ( probably forget this one ) Some DTE devices require the DSR (Data Set Ready) signal. This signal is usually provided by the DCE device. If you have a DTE device (such as a terminal) that requires the DSR signal, wire pins 20 and 6 (4 and 6 on a DB-9 connector) together. This way, the DTE device will receive the DSR signal from itself when it asserts the DTR signal. -----Original Message----- From: DFinn(a)studentadvantage.com [mailto:DFinn@studentadvantage.com] Sent: Mon 19/05/2003 19:55 To: Jason.Santos(a)pinnaclewest.com Cc: toasters(a)mathworks.com Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port That's strange. I tried one of those and it didn't work. It's a black rj45->db9 connector labeled TERMINAL and it's the one I was using to attach to the serial port of a laptop to console into the cisco. I know the console port on the netapp works fine though because I can get into that with a serial cable and a laptop. -----Original Message----- From: Jason.Santos(a)pinnaclewest.com To: DFinn(a)studentadvantage.com Sent: 5/19/03 1:52 PM Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port They are pinned out the same as the adapters that came with the 2511 (labeled Terminal, I think). I have some at home, don't have one here, I can e-mail you later if you still didn't find it. -- Jason Santos Sr. Unix System Administrator APS/Pinnacle West Phoenix, AZ USA -----Original Message----- From: DFinn(a)studentadvantage.com [mailto:DFinn@studentadvantage.com] Sent: Monday, May 19, 2003 10:32 AM To: toasters(a)mathworks.com Subject: sem-OT : rj45->db9 pin-out to connect to netapps console port I've decided to try and use the Cisco 2511-RJ that we currently have in place for our sun gear and connect the netapps to that for network console connections. I picked up some rj45->db9 connectors that need to be pin'd out. Does anyone know how these are pin'd out offhand? Thanks Dan

1 0

RE: snapshot appearing in qtree
by Dell, Mary 19 May '03

19 May '03

Legato creates that directory on my volumes even when I'm not using snapshots. Anyway Legato backs up by creating a snapshot and then backing up the snapshot and then it (supposedly) deletes the snap, but if it fails mid-backup it might leave it out there. I assume other backup software works similarly. Not sure how to get rid of it. With at least one version of Ontap, trying to delete the contents of that folder panics the filer, so think twice before trying that! I found that out the hard way. Mary Dell -----Original Message----- From: Maglinger, Paul [mailto:PMAGLINGER@scvl.com] Sent: Monday, May 19, 2003 2:00 PM To: 'NetApps list server' Subject: snapshot appearing in qtree We have a 740 filer running 6.3.1R1 with NFS shares to a Tru64 Unix 5.1a cluster. We have a directory on the Unix machine mounted to a folder on vol0 on the filer. When I do a df -k against the mount on the Unix system, it shows that it is nearly full. I cd into the mount and see a .snapshot directory with entries from June 12th 2002. When I turn snapshots on, I can't see any snapshots directory or folders in Windows Explorer. I can't see these snapshots from filerview either. If I unmount the directory, it shows empty so I know that it believes the filer directory is almost full. What's doing this and how can I correct? Our glory is not in never falling, but rising every time we fall. Paul Maglinger, A+, CA, CCA, CET, MCSE Systems Administrator Shoe Carnival Inc. (812)867-4674 pmaglinger(a)scvl.com This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Confidential, proprietary or time-sensitive communications should not be transmitted via the Internet, as there can be no assurance of actual or timely delivery, receipt and/or confidentiality. This is not an offer, or solicitation of any offer to buy or sell any security, investment or other product.

1 0

snapshot appearing in qtree
by Maglinger, Paul 19 May '03

19 May '03

We have a 740 filer running 6.3.1R1 with NFS shares to a Tru64 Unix 5.1a cluster. We have a directory on the Unix machine mounted to a folder on vol0 on the filer. When I do a df -k against the mount on the Unix system, it shows that it is nearly full. I cd into the mount and see a .snapshot directory with entries from June 12th 2002. When I turn snapshots on, I can't see any snapshots directory or folders in Windows Explorer. I can't see these snapshots from filerview either. If I unmount the directory, it shows empty so I know that it believes the filer directory is almost full. What's doing this and how can I correct? Our glory is not in never falling, but rising every time we fall. Paul Maglinger, A+, CA, CCA, CET, MCSE Systems Administrator Shoe Carnival Inc. (812)867-4674 pmaglinger(a)scvl.com

1 0

RE: REDUCE the size of a VLD running Exchange
by Charles Roufay 19 May '03

19 May '03

I copied it directly from the console so no typo error. here is a df -r bwnlfs01> df -r Filesystem kbytes used avail reserved Mounted on /vol/VLD_EXData/ 169154752 44206916 0 124947836 /vol/VLD_EXData/ /vol/VLD_EXData/.snapshot 18794972 0 18794972 0 /vol/VLD_EXData/.snapshot regards Charles -----Original Message----- From: Chris Thompson [mailto:cet1@cus.cam.ac.uk] Sent: maandag 19 mei 2003 16:28 To: Charles Roufay Cc: victor.olsen(a)proact.no; toasters(a)mathworks.com Subject: Re: REDUCE the size of a VLD running Exchange Charles.Roufay(a)bluewater-group.com writes: > > here is a df from the volume > > > Filesystem kbytes used avail capacity Mounted on > /vol/VLD_EXData/ 169154752 44207168 0 26% > /vol/VLD_EXData/ > /vol/VLD_EXData/.snapshot 18794972 0 8794972 0% > /vol/VLD_EXData/.snapshot > > we seem to have enough space That looks mighty strange output from "df". The sizes are right for a (3+1) x 72GB volume with 10% snapshot reserve, but the used/avail values make no sense to me. Is the "avail" for /vol/VLD_EXData/.snapshot really 18794972 rather than 8794972 (that could be a transcription error), which would be consistent with there being no snapshots. Is that what "snap list VLD_EXData" says? I don't know what to make of the zero avail figure for the active filing system ... Chris Thompson Email: cet1 [at] cam.ac.uk

2 1

sem-OT : rj45->db9 pin-out to connect to netapps console port
by DFinn＠studentadvantage.com 19 May '03

19 May '03

I've decided to try and use the Cisco 2511-RJ that we currently have in place for our sun gear and connect the netapps to that for network console connections. I picked up some rj45->db9 connectors that need to be pin'd out. Does anyone know how these are pin'd out offhand? Thanks Dan

1 0

RE: REDUCE the size of a VLD running Exchange
by Charles Roufay 19 May '03

19 May '03

here is a df from the volume Filesystem kbytes used avail capacity Mounted on /vol/VLD_EXData/ 169154752 44207168 0 26% /vol/VLD_EXData/ /vol/VLD_EXData/.snapshot 18794972 0 8794972 0% /vol/VLD_EXData/.snapshot we seem to have enough space regards charles -----Original Message----- From: Victor Olsen [mailto:victor.olsen@proact.no] Sent: maandag 19 mei 2003 13:50 To: Charles Roufay; toasters(a)mathworks.com Subject: RE: REDUCE the size of a VLD running Exchange Hi, I think you are out of luck and will have to add more disks. You need to have available space > 0 to create snapshots on a volume. And reserved space does not count as available space. Regards, Victor -----Original Message----- From: Charles Roufay [mailto:Charles.Roufay@bluewater-group.com] Sent: 19. mai 2003 13:24 To: toasters(a)mathworks.com Subject: REDUCE the size of a VLD running Exchange Hi, Is anyone aware of a way I could reduce the size of a VLD using snapdrive? It is preventing snapdrive from creating snapshots and we do not want to add more disk to the volume. Any ideas? Charles Roufay Sr Network Administrator Bluewater Energy Services B.V Marsstraat 33 2132 HR Hoofddorp Netherlands Tel 023 568 2800 - www.bluewater.nl

2 1

Filer F840 Network Path?
by Helberth Alexis Osorio O. 19 May '03

19 May '03

I have a F840 on Windows NT Domain? Wheni try to mapping the path C$ or any other path of the filer, the system cannot find the network path. In the administrative Tools, "Server Manager" i see the computer, type and description, selecting the computer and properties i receive the next message: "The network path was not found", please anybody can help me. Thank you very much. Helberth Alexis Osorio O. Professional Services Manager Information Technologies de Colombia "INTEK" Teléfono: (57-1)6206370 ext 15 Fax: (57-1)6206365 Celular: (57-315)3108457 Santafé de Bogotá, D.C. Colombia www.intek.com.co STORAGETEK INFORMATION made POWERFUL

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters