toasters

toasters@lists.teaparty.net

13514 discussions

sem-OT : rj45->db9 pin-out to connect to netapps console port
by DFinn＠studentadvantage.com 19 May '03

19 May '03

I've decided to try and use the Cisco 2511-RJ that we currently have in place for our sun gear and connect the netapps to that for network console connections. I picked up some rj45->db9 connectors that need to be pin'd out. Does anyone know how these are pin'd out offhand? Thanks Dan

1 0

RE: REDUCE the size of a VLD running Exchange
by Charles Roufay 19 May '03

19 May '03

here is a df from the volume Filesystem kbytes used avail capacity Mounted on /vol/VLD_EXData/ 169154752 44207168 0 26% /vol/VLD_EXData/ /vol/VLD_EXData/.snapshot 18794972 0 8794972 0% /vol/VLD_EXData/.snapshot we seem to have enough space regards charles -----Original Message----- From: Victor Olsen [mailto:victor.olsen@proact.no] Sent: maandag 19 mei 2003 13:50 To: Charles Roufay; toasters(a)mathworks.com Subject: RE: REDUCE the size of a VLD running Exchange Hi, I think you are out of luck and will have to add more disks. You need to have available space > 0 to create snapshots on a volume. And reserved space does not count as available space. Regards, Victor -----Original Message----- From: Charles Roufay [mailto:Charles.Roufay@bluewater-group.com] Sent: 19. mai 2003 13:24 To: toasters(a)mathworks.com Subject: REDUCE the size of a VLD running Exchange Hi, Is anyone aware of a way I could reduce the size of a VLD using snapdrive? It is preventing snapdrive from creating snapshots and we do not want to add more disk to the volume. Any ideas? Charles Roufay Sr Network Administrator Bluewater Energy Services B.V Marsstraat 33 2132 HR Hoofddorp Netherlands Tel 023 568 2800 - www.bluewater.nl

2 1

Filer F840 Network Path?
by Helberth Alexis Osorio O. 19 May '03

19 May '03

I have a F840 on Windows NT Domain? Wheni try to mapping the path C$ or any other path of the filer, the system cannot find the network path. In the administrative Tools, "Server Manager" i see the computer, type and description, selecting the computer and properties i receive the next message: "The network path was not found", please anybody can help me. Thank you very much. Helberth Alexis Osorio O. Professional Services Manager Information Technologies de Colombia "INTEK" Teléfono: (57-1)6206370 ext 15 Fax: (57-1)6206365 Celular: (57-315)3108457 Santafé de Bogotá, D.C. Colombia www.intek.com.co STORAGETEK INFORMATION made POWERFUL

2 1

RE: Filer F840 Network Path?
by Charles Roufay 19 May '03

19 May '03

is DNS enabled? the command dns info will tell you if not ? then type qtree to see what security type you are using (ntfs or unix) charles -----Original Message----- From: Helberth Alexis Osorio O. [mailto:alexis.osorio@intek.com.co] Sent: maandag 19 mei 2003 15:44 To: Charles Roufay Subject: RE: Filer F840 Network Path? yes i can see the cifs shares and i´m using IP address. Maybe the security style of the shares? -----Mensaje original----- De: Charles Roufay [mailto:Charles.Roufay@bluewater-group.com] Enviado el: Lunes, 19 de Mayo de 2003 08:40 a.m. Para: 'alexis.osorio(a)intek.com.co' Asunto: RE: Filer F840 Network Path? Hello, Is the C$ visible when you run cifs shares command on the filer through the console? Are you mapping using the hostname or the ip address? (use ip address if DNS is not setup)? Regards charles -----Original Message----- From: Helberth Alexis Osorio O. [mailto:alexis.osorio@intek.com.co] Sent: maandag 19 mei 2003 15:24 To: NetApp List (E-mail) Subject: Filer F840 Network Path? I have a F840 on Windows NT Domain? Wheni try to mapping the path C$ or any other path of the filer, the system cannot find the network path. In the administrative Tools, "Server Manager" i see the computer, type and description, selecting the computer and properties i receive the next message: "The network path was not found", please anybody can help me. Thank you very much. Helberth Alexis Osorio O. Professional Services Manager Information Technologies de Colombia "INTEK" Teléfono: (57-1)6206370 ext 15 Fax: (57-1)6206365 Celular: (57-315)3108457 Santafé de Bogotá, D.C. Colombia www.intek.com.co STORAGETEK INFORMATION made POWERFUL

1 0

Replacing a PSU on a DS-14
by Paul McGuinness (ext. 771) 19 May '03

19 May '03

Hi, quick question. I have a DS-14 shelf on an F720, DOT 6.3.1, with one failed power supply (second one still running fine allbeit getting a bit warm). Replacement is on the way. Is this hot swappable? Thanks -----Original Message----- From: Bob Borowicz [mailto:rbaus@swbell.net] Sent: 17 May 2003 17:34 To: toasters(a)mathworks.com Subject: Re: CIFS/NFS cross authentication Thanks Mark, i'll check it out. This is what I'm finding out the hard way... User ACL's on a NFS mount? Wow... Doing mixed security makes for strange behaviours... And for me without a Domain Controller opens the door to the "useradmin" user db which is a whole nother ball of wax... Thanks for the article. -Bob Muhlestein, Mark wrote: > If the files in a mixed or ntfs qtree have ACLs you have to be able to > map the NFS cred to a CIFS cred. That is described on the NOW site: > > http://now.netapp.com/NOW/knowledge/docs/olio/guides/53_troubleshooting/ > index.shtml > > See particularly the section on the user map file. You can test the > mappings by turning on the cifs.trace_login option and doing a "wcc -u > <uid>" filer command. > > Mark > > -----Original Message----- > From: Robert Borowicz [mailto:rbaus@swbell.net] > Sent: Friday, May 16, 2003 12:45 PM > To: toasters(a)mathworks.com > Subject: CIFS/NFS cross authentication > > OK folks my brain is smoking... Or perhaps its *what* I'm smoking that's > > doing it... > > I'm trying to do a Mixed security qtree called "dlogs". My webmaster > runs > "Webtrends" on the access logs of our Webserver to gen stats for the big > > whigs. Whopp Dee Do.... So I want a NFS dir to dump the logs off of the > > Unix Webserver and then give her access on her PC where Webtrends is. > > So I create a qtree called "dlogs", and add the dir to /etc/exports and > do > a "cifs share dlogs" etc... I delete "everybody/Full Control" and add > just > the folks I want to have access to on the PC side. > > So the PC side works great. And the NFS side works fine with the mount > command but when I try and "cd" into the dir on the remote host I get a > "permission denied". > > Anybody have this problem already? > > Thanks > > -Bob B. > > ************************************************************************** The information contained in this e-mail is confidential, may be privileged and is intended only for the use of the recipient named above. If you are not the intended recipient or a representative of the intended recipient, you have received this e-mail in error and must not copy, use or disclose the contents of this email to anybody else. If you have received this e-mail in error, please notify the sender immediately by return e-mail and permanently delete the copy you received. This email has been swept for computer viruses. However, you should carry out your own virus checks. Registered in Ireland, No. 205721. http://www.FINEOS.com **************************************************************************

2 1

FAS940 mapping drives?
by Helberth Alexis Osorio O. 19 May '03

19 May '03

Hi, i´ve got a problems with a FAS940 registered on Windows NT domain. When i use the quick setup to start the use the Filer, i do the changes to register the Domain with out any problems. I go to the Administrative Tools, Server Manager and i can see the Computer registered in the Domain but with out description, when i try to obtain properties of the computer i receive the next message "Access is denied". Checking the configuration the domain is "workgroup" and isn´t my domain "EPM_BOG", i execute again the quick setup and cifs setup, but the problem is the same. Any comments? Helberth Alexis Osorio O. Professional Services Manager Information Technologies de Colombia "INTEK" Teléfono: (57-1)6206370 ext 15 Fax: (57-1)6206365 Celular: (57-315)3108457 Santafé de Bogotá, D.C. Colombia www.intek.com.co STORAGETEK INFORMATION made POWERFUL

1 0

RE: REDUCE the size of a VLD running Exchange
by Victor Olsen 19 May '03

19 May '03

Hi, I think you are out of luck and will have to add more disks. You need to have available space > 0 to create snapshots on a volume. And reserved space does not count as available space. Regards, Victor -----Original Message----- From: Charles Roufay [mailto:Charles.Roufay@bluewater-group.com] Sent: 19. mai 2003 13:24 To: toasters(a)mathworks.com Subject: REDUCE the size of a VLD running Exchange Hi, Is anyone aware of a way I could reduce the size of a VLD using snapdrive? It is preventing snapdrive from creating snapshots and we do not want to add more disk to the volume. Any ideas? Charles Roufay Sr Network Administrator Bluewater Energy Services B.V Marsstraat 33 2132 HR Hoofddorp Netherlands Tel 023 568 2800 - www.bluewater.nl

1 0

REDUCE the size of a VLD running Exchange
by Charles Roufay 19 May '03

19 May '03

Hi, Is anyone aware of a way I could reduce the size of a VLD using snapdrive? It is preventing snapdrive from creating snapshots and we do not want to add more disk to the volume. Any ideas? Charles Roufay Sr Network Administrator Bluewater Energy Services B.V Marsstraat 33 2132 HR Hoofddorp Netherlands Tel 023 568 2800 - www.bluewater.nl

1 0

Re: CIFS/NFS cross authentication
by Bob Borowicz 17 May '03

17 May '03

Thanks Mark, i'll check it out. This is what I'm finding out the hard way... User ACL's on a NFS mount? Wow... Doing mixed security makes for strange behaviours... And for me without a Domain Controller opens the door to the "useradmin" user db which is a whole nother ball of wax... Thanks for the article. -Bob Muhlestein, Mark wrote: > If the files in a mixed or ntfs qtree have ACLs you have to be able to > map the NFS cred to a CIFS cred. That is described on the NOW site: > > http://now.netapp.com/NOW/knowledge/docs/olio/guides/53_troubleshooting/ > index.shtml > > See particularly the section on the user map file. You can test the > mappings by turning on the cifs.trace_login option and doing a "wcc -u > <uid>" filer command. > > Mark > > -----Original Message----- > From: Robert Borowicz [mailto:rbaus@swbell.net] > Sent: Friday, May 16, 2003 12:45 PM > To: toasters(a)mathworks.com > Subject: CIFS/NFS cross authentication > > OK folks my brain is smoking... Or perhaps its *what* I'm smoking that's > > doing it... > > I'm trying to do a Mixed security qtree called "dlogs". My webmaster > runs > "Webtrends" on the access logs of our Webserver to gen stats for the big > > whigs. Whopp Dee Do.... So I want a NFS dir to dump the logs off of the > > Unix Webserver and then give her access on her PC where Webtrends is. > > So I create a qtree called "dlogs", and add the dir to /etc/exports and > do > a "cifs share dlogs" etc... I delete "everybody/Full Control" and add > just > the folks I want to have access to on the PC side. > > So the PC side works great. And the NFS side works fine with the mount > command but when I try and "cd" into the dir on the remote host I get a > "permission denied". > > Anybody have this problem already? > > Thanks > > -Bob B. > >

1 0

RE: CIFS home directory umask
by Muhlestein, Mark 17 May '03

17 May '03

Yes, if you are running ONTAP 6.2.1 or later. Issue a command like this: Filer> cifs shares -change cifs.homedir -umask 111 You may also want to use 133 to remove WRITE from group and other. Note that this umask also affects directory creation by CIFS clients. Mark -----Original Message----- From: Charles Bartels [mailto:cbartels@openharbor.com] Sent: Friday, May 16, 2003 11:22 AM To: toasters(a)mathworks.com Subject: CIFS home directory umask Hi Folks, Is it possible to set the umask on home directory "shares" in a UNIX security style qtree? Right now if a user creates a file from a pc the "execute" bit is set (755, -rwxr-xr-x) -C.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters