toasters

toasters@lists.teaparty.net

13520 discussions

RE: Airflow in DS14 shelf if disk removed
by Coder, James (STP) 13 Oct '05

13 Oct '05

We had a disk in a ds14 cause a 960 cluster to fail due to noise on the buss. Air flow is not my main concern. Pull the puppy as soon as practical. jc James C. Coder " Plan the Work - Accept Only One Number 1 Priority at a Time." Sr. UNIX Administrator Guidant Corporation 4100 Hamline Avenue North St. Paul, MN 55112 Tel: 651-582-4797 Fax 651-582-4285 email: james.coder(a)guidant.com "Any views expressed in this e-mail are not those of Guidant Corporation." -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Stefan Funke (Home Office) Sent: Wednesday, October 12, 2005 5:12 PM To: Chris Thompson Cc: toasters(a)mathworks.com Subject: Re: Airflow in DS14 shelf if disk removed Am 12.10.2005 um 21:54 schrieb Chris Thompson: > We had a failure of a disk in our DS14 shelf (attached to an F810) > last night. All the automatic shipping of a replacement seems to be > working fine. > > However, if one leaves the failed disk in the shelf while waiting for > the replacement, then every few hours one gets a message like > > Wed Oct 12 10:00:00 BST [raid.fdr.reminder:warning]: > Failed Disk 8b.22 Shelf 1 Bay 6 > [NETAPP X272_SCHT6073F10 NA06] S/N [3HZ171ZR000073420TXM] > is still present in the system and should be removed. > > But I am concerned that actually removing the disk with its carrier > would leave the airflow through the shelf unbalanced. I have > compromised by disenganging the disk from the shelf but leaving it > sitting in the slot, sticking out just a little. > > What do others do in in this situation? Maybe you all have dummy > carriers to block vacant slots? I think it's a common solution to release the disk and stick it out just a little so the rack door can still be closed. ;-)

1 0

RE: Airflow in DS14 shelf if disk removed
by Francett, Robert D (SAIC) 12 Oct '05

12 Oct '05

I do the same thing you are doing. Bob -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Chris Thompson Sent: Wednesday, October 12, 2005 11:55 AM To: toasters(a)mathworks.com Subject: Airflow in DS14 shelf if disk removed We had a failure of a disk in our DS14 shelf (attached to an F810) last night. All the automatic shipping of a replacement seems to be working fine. However, if one leaves the failed disk in the shelf while waiting for the replacement, then every few hours one gets a message like Wed Oct 12 10:00:00 BST [raid.fdr.reminder:warning]: Failed Disk 8b.22 Shelf 1 Bay 6 [NETAPP X272_SCHT6073F10 NA06] S/N [3HZ171ZR000073420TXM] is still present in the system and should be removed. But I am concerned that actually removing the disk with its carrier would leave the airflow through the shelf unbalanced. I have compromised by disenganging the disk from the shelf but leaving it sitting in the slot, sticking out just a little. What do others do in in this situation? Maybe you all have dummy carriers to block vacant slots? -- Chris Thompson Email: cet1(a)cam.ac.uk

1 0

VIRUS (Win32/MyDoom.O!Worm): IN UNA E-MAIL DA LEI INVIATA
by Content-filter at bolino.trampi.mpi.it 11 Oct '05

11 Oct '05

VIRUS ALERT Il sistema di scansione ha rilevato un problema in una email presumibilmente inviate da Lei -> (<toasters(a)mathworks.com>), per il seguente destinatario: -> namm53200t(a)istruzione.it La consegna del messaggio non e' potuta avvenire Di seguito i riferimenti della e-Mail inviata: ------------------------- BEGIN HEADERS ----------------------------- Return-Path: <toasters(a)mathworks.com> Received: from mathworks.com (host94-103.pool81119.interbusiness.it [81.119.103.94]) by mx4.istruzione.it (Mail Service) with ESMTP id 683DC562B68 for <namm53200t(a)istruzione.it>; Tue, 11 Oct 2005 12:44:51 +0200 (CEST) From: toasters(a)mathworks.com To: namm53200t(a)istruzione.it Subject: blozdafajn Date: Tue, 11 Oct 2005 12:32:51 +0200 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0004_A731886D.9EBD5091" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-Id: <20051011104451.683DC562B68(a)mx4.istruzione.it> -------------------------- END HEADERS ------------------------------

1 0

Natural medicine for the New Millennium.
by Arnold Berry 11 Oct '05

11 Oct '05

eBay Pharmacy that will be accessing this feed.You are not allowed to access this page from this IP address. We don't care. We don't have to. We're the phone company. Creativity is a drug I cannot live without. Adolescence is the stage between infancy and adultery. The ancestor of every action is a thought. A friend is a gift you give yourself. Pride is seldom delicate; it will please itself with very mean advantages. A journey of a thousand miles must begin with a single step.

1 0

Formatting disks
by Carl Friend 10 Oct '05

10 Oct '05

Greetings Toaster fans, We powered down four F840s last week, reconfigured them with the newest drives we had (it's a long story), and upon reboot, at least three of the drives started experiencing random failures. These failures are enough that ONTAP gripes and marks them as "failed", but I suspect that a low-level format should bring things back to a sane state. Can ONTAP low-level format a 520B/sector disk, or do I need to find something else to do that? If the latter, does anyone have an idea as to what I can use? Many thanks! +----------------------------------------------+-----------------------+ | Carl Richard Friend (UNIX Sysadmin) | Natick, Massachusetts | | Minicomputer Collector / Enthusiast | 01760-2098 | | mailto:carl_friend@mathworks.com +-----------------------+ | http://users.rcn.com/crfriend/museum | ICBM: 42:18N 71:21W | +----------------------------------------------+-----------------------+

2 1

NDMP Backup fails
by Patrick van Helden 10 Oct '05

10 Oct '05

Hi all, Anyone out there that can help with the following: We have a R200 Nearstore with a Storagetek L80 library attached trough FC. We use Brightstor Arcserve 11.1 SP1 (latest patches) to backup a volume on the filer. All seems to go fine, until the second tape is requested. In the Arcserve log it says: E8535 01-10-2005 00:15:04 154 1 Failed to receive data from the client agent. (ADDRESS=xxx.xxx.xxx.xxx (xxxxxxx), EC=9, COMMAND=0) Information 01-10-2005 00:15:01 154 1 Resume Backup Operation. Information 01-10-2005 00:15:01 154 1 Format FRIDAY [S/N:, ID:1541, Seq:1] as FRIDAY [S/N:, ID:9F36, Seq:2]. Information 01-10-2005 00:14:48 End cleaning database. (CLEANED=0) Information 01-10-2005 00:14:48 Begin cleaning database. Information 01-10-2005 00:14:01 154 1 Next media FRIDAY, ID 9F36, sequence #2 Information 30-09-2005 21:01:07 154 1 Backup Session 1 on Media FRIDAY Information 30-09-2005 21:01:07 154 1 Source Directory: vol\data\.snapshot\hourly.0 After this the backup job obviously fails. We have tried all options given by arcserve but without any success. Also we attached the library using direct attached SCSI but no success. All the configuration options are checked and seem oke. Also the NDMP log on the filer shows no errors. Regards to all toaster fans, Patrick

1 0

Adobe Acrobat 7.0 Professional - $44.95
by Charlotte Carey 09 Oct '05

09 Oct '05

Pinnacle Liquid Edition 6.0 - $39.95 http://misnomer.waptip.com/ The shortest distance between two points is under construction. Education's purpose is to replace an empty mind with an open one. All that we are is the result of what we have thought. Be a fountain, not a drain. Gaiety is the most outstanding feature of the Soviet Union. Never spend your money before you have it. Show me a hero and I will write you a tragedy.

1 0

REPRESENTATIVE NEEDED..
by chiokyu 07 Oct '05

07 Oct '05

Dear Sir/Madam, I am Mr.Chio Kyu-Hah,we are a group of business men who deal on import and export raw materials into the canada,america AND europe. We are searching for representatives who can help us establish a medium of getting to our costumers in the canada, america AND europe as well as making payments through you to us. Please if you are interested in transacting business with us we will be very glad. Please contact us for more information. Subject to your satisfaction you will be given the opportunity to negotiate your mode of which we will pay for your services as our representative in canada,america and europe. Regards, Mr Chio Kyu President. ___________________________________________________________________________ Mail sent from WebMail service at PHP-Nuke Powered Site - http://yoursite.com

1 0

Information about Verifeye
by Vaughn Liley 06 Oct '05

06 Oct '05

1 0

Flash Demonstration of Verifeye
by Vaughn Liley 06 Oct '05

06 Oct '05

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters