toasters

toasters@lists.teaparty.net

13520 discussions

RE: Deleting Qtrees
by Bekkay, Hasni H SITI-ITIBHL 01 Dec '05

01 Dec '05

Hi, you cannot delete the qtree from the filer, as far as netapp, qtree is treated as normal directory and you can only deleted from cifs or NFS as you mentioned below.... Hasni. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com]On Behalf Of Steve Losen Sent: donderdag 1 december 2005 14:01 To: Patrick van Helden Cc: toasters(a)mathworks.com Subject: Re: Deleting Qtrees > Hi, > > Does anyone have any information about deleting qtrees from the filer? For example with the rm command? > From a Unix NFS client you can use "rm -r" to remove a qtree. There isn't an ONTAP command to do it on the filer. You use a NFS or CIFS client to remove the qtree directory. Don't forget to update your quotas file to remove entries for the deleted qtree. Then you should run "quota off" and "quota on". There is a bug that crashes the filer if you run "quota resize" after a particular sequence of qtree deletions and quota file updates. Your version of ONTAP may have this bug fixed. We crashed a filer running 7.0.1R1 due to this bug. Steve Losen scl(a)virginia.edu phone: 434-924-0640 University of Virginia ITC Unix Support

1 0

"Failed" disks on old FC9 shelf
by Ronan Mullally 01 Dec '05

01 Dec '05

I'm trying to resurrect an old F760 with two FC9 shelves. Both shelves have got 33GB disks in them. One shelf is recognised fine by the filer, the disks in the other are all shown as failed. It's been a long time since I had a filer to play with, so I suspect there may be some configuration / formatting issue causing the problem rather than dead disks. When I boot the filer I get the following: error 19 (disk not ready for requested operation) while reading ownership on disk 1.8 (S/N 3CD1K2JW000021304AR5) error 19 (disk not ready for requested operation) on disk 1.8 (S/N 3CD1K2JW000021304AR5) while reading individual disk ownership area (repeated for each disk on the second shelf) Disk 1.22 Shelf ? Bay ? [NETAPP X231_ST336704FC NA41] S/N [3CD1JAGA00002131841C] initialization failed. (repeated for each disk on the second shelf) No SCSI-3 Enclosure Services on channel 1 shelf 2. Check drive placement. Enclosure services unable to contact shelf attached to channel 1. After booting, the filer shows: filer> sysconfig -d Device HA SHELF BAY CHAN Disk Vital Product Information ---------- --------------- ----- ------------------------------ 1.0 1 0 0 FC:A 3CD1KE26000021316WPE 1.1 1 0 1 FC:A 3CD1JYX50000213195LS 1.2 1 0 2 FC:A 3CD1JH0Y0000213194GM 1.3 1 0 3 FC:A 3CD1JYTE0000213033L5 1.4 1 0 4 FC:A 3CD1K8NL0000213033NS 1.5 1 0 5 FC:A 3CD1JWFW000021316UD1 1.6 1 0 6 FC:A 3CD1JYAM0000213033G3 1.8 1 1 0 FC:A Not available. 1.9 1 1 1 FC:A Not available. 1.10 1 1 2 FC:A Not available. 1.11 1 1 3 FC:A Not available. 1.12 1 1 4 FC:A Not available. 1.13 1 1 5 FC:A Not available. 1.14 1 1 6 FC:A Not available. filer> storage show disk DISK SHELF BAY SERIAL VENDOR MODEL REV --------------------- --------- ---------------- -------- ---------- ---- 1.0 0 0 3CD1KE26000021316WPE NETAPP X231_ST336 NA42 1.1 0 1 3CD1JYX50000213195LS NETAPP X231_ST336 NA42 1.2 0 2 3CD1JH0Y0000213194GM NETAPP X231_ST336 NA42 1.3 0 3 3CD1JYTE0000213033L5 NETAPP X231_ST336 NA42 1.4 0 4 3CD1K8NL0000213033NS NETAPP X231_ST336 NA42 1.5 0 5 3CD1JWFW000021316UD1 NETAPP X231_ST336 NA42 1.6 0 6 3CD1JYAM0000213033G3 NETAPP X231_ST336 NA42 1.8 1 0 3CD1K2JW000021304AR5 NETAPP X231_ST336 NA41 1.9 1 1 3CD1F30H00002127J1TG NETAPP X231_ST336 NA41 1.10 1 2 3CD1J4Z10000213184M1 NETAPP X231_ST336 NA41 1.11 1 3 3CD1JXXH000021316VQC NETAPP X231_ST336 NA41 1.12 1 4 3CD1NTN100007115KWLC NETAPP X231_ST336 NA41 1.13 1 5 3CD1JG2Y0000213182UR NETAPP X231_ST336 NA41 1.14 1 6 3CD1JAGA00002131841C NETAPP X231_ST336 NA41 I've moved disks from shelf 1 to shelf 2 where they appear to work okay. Disks moved from shelf 2 to shelf 1 remain dead. I've tried booting into maintenance mode and reformatting the dead disks. This resulted in an lots of fun and games trying to recover from the 512 byte sector size that the disks were formatted with. Has anybody got any ideas? I'm hoping it's something reasonably straightforward... -Ronan

2 2

RE: Deleting Qtrees
by Crawford, Mark (CBC) 01 Dec '05

01 Dec '05

From Unix on an NFS mount, use "rm -rf <path to qtree>". This will delete all files and subdirectories without prompting. From Windows on a CIFS mount, use "rd <path to qtree> /s/q". This will delete all files and subdirectories without prompting. For CIFS, you must stop and shares within the specific qtree structure. "cifs shares -delete <sharename>". -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Steve Losen Sent: Thursday, December 01, 2005 8:01 AM To: Patrick van Helden Cc: toasters(a)mathworks.com Subject: Re: Deleting Qtrees > Hi, > > Does anyone have any information about deleting qtrees from the filer? For example with the rm command? > From a Unix NFS client you can use "rm -r" to remove a qtree. There isn't an ONTAP command to do it on the filer. You use a NFS or CIFS client to remove the qtree directory. Don't forget to update your quotas file to remove entries for the deleted qtree. Then you should run "quota off" and "quota on". There is a bug that crashes the filer if you run "quota resize" after a particular sequence of qtree deletions and quota file updates. Your version of ONTAP may have this bug fixed. We crashed a filer running 7.0.1R1 due to this bug. Steve Losen scl(a)virginia.edu phone: 434-924-0640 University of Virginia ITC Unix Support Confidentiality Notice: This e-mail is intended only for the personal and confidential use of the individual to whom it is addressed and may contain information that is privileged, confidential and protected by law. If you are not the intended recipient, you are hereby notified that any use or disclosure of this information is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply e-mail and delete the original message. Your compliance is appreciated.

1 0

RE: Deleting Qtrees
by Holland, William L 01 Dec '05

01 Dec '05

A Qtree is simply a folder with special attributes. Use whatever client you would use to access the shared volume and delete it. -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:pvh@databasement.nl] Sent: Thursday, December 01, 2005 7:56 AM To: toasters(a)mathworks.com Subject: Deleting Qtrees Hi, Does anyone have any information about deleting qtrees from the filer? For example with the rm command? Regards, Patrick

1 0

Deleting Qtrees
by Patrick van Helden 01 Dec '05

01 Dec '05

Hi, Does anyone have any information about deleting qtrees from the filer? For example with the rm command? Regards, Patrick

3 2

RE: QLA2340 in FCP mode w/SD
by Varghese, John 29 Nov '05

29 Nov '05

Found the answer: Even in FCP world, you will have to set a preferredIP address. The procedure to do this is as follows: http://now.netapp.com/Knowledgebase/solutionarea.asp?id=kb4350 <http://now.netapp.com/Knowledgebase/solutionarea.asp?id=kb4350> By setting a PreferredIP address, you will prevent VIFs from flaking out Snapdrive MUST have an Ethernet connection to the filer regardless of the SAN implementation. The Snapdrive "Command & Control" traffic will not flow across the SAN. Snapdrive is using ZAPI and CIFS calls to communicate with the filer and that can only travel over a public Ethernet connection.

1 0

QLA2340 in FCP mode w/SD
by Varghese, John 28 Nov '05

28 Nov '05

I installed two QLA HBA in a FCP SAN. I went to install MPIO license and then rebooted the servers. Now I can't manage the luns in SD; however, I can see the drives in 'My computer' Originally I thought it may be a SANSurfer or Host Attach Kit issue, but that doesn't seem to be the case. It appears that SD uses the UNC path to make the initial connection. Since I had VIFs enabled, it seemed like the path was failing somehow. Has anyone else seen this happen or does anyone know why SD needs to use the UNC path to make the connection. What if my ether-switches die? Does that mean I will not be able to manage my drives in SD? Thanks, JV John Varghese Sr. Engineer Select, Inc. Select : StrategIT 1-800-634-1806 ext. 213 1-781-461-2766 (fax) John.Varghese(a)Strategit.com www.strategit.com <http://www.strategit.com/>

1 0

Dringendal
by daniel_ngoye＠virgilio.it 28 Nov '05

28 Nov '05

Sehr geehter Mein Name ist Daniel Ngoye und ich bin der Leiter des Research Department Committee in der Standard Bank in Südafrika. Zur Zeit halte ich mich in den Niederlanden zu einer Fortbildung auf. Ich kontaktiere Sie bezüglich des Transfers einer sehr großen Summe Geldes vom Konto eines Verstorbenen. Ich weiß, daß eine Transaktion dieser Größenordnung zunächst bei jedem Besorgnis erregen wird und versichere ich Ihnen, daß sich um alles gekümmert wird.Aufgrund der Dringlichkeit der Angelegenheit habe ich mich entschlossen, Sie zu kontaktieren. Es geht um folgendes: Einer meiner Kollegen ist für das Konto von Gerald Welsh zuständig, der gemeinsam mit seiner Frau im January bei einem Flugzeugabsturz ums Leben kam. Er befand sich gemeinsam mit anderen Passagieren an Bord einer Egyptian Airline 90. (http://news.bbc.co. uk/1/world/americas/502503.stm ) Seit diesem Vorfall ist niemand seiner nächsten Verwandten mehr am Leben, der als sein Erbe Ansprüche auf das Guthaben auf seinem Konto erheben könnte. Wir können jedoch gemäß unserer Richtlinien das Geld nicht auszahlen, bevor jemand als Angehöriger und Erbe auftritt und seinen Anspruch geltend macht. Aufgrund dieser Entdeckung und der Übereinstimmung Ihres Namens mit dem des Verstorbenen bitten meine Kollegen und ich Sie nun um Ihre Erlaubnis, Sie als nächsten Angehörigen des Verstorbenen anzugeben. Die gesamte Abwicklung und Dokumentation wird sorgfältig von mir durchgeführt, damit das Guthaben von 20.5 Millionen US$ an Sie als nächsten Angehörigen ausgezahlt werden kann. Andernfalls wird die gesamte Summe nach fünf Jahraen in das Eigentum der Bank übergehen und die Direktoren der Bank werden sie untereinander aufteilen. Aufgrund dieser Tatsache habe ich mich entschlossen, mich an Sie zu wenden, damit Sie als Erbe auftreten können und nicht alles den Direktoren zugute kommt. Da aber die Person, die im Testament als Erbin genannt wird, mit ihm gemeinsam verstorben ist, haben wir vom Nachlaßverwalter den Auftrag bekommen, ein Familienmitglied des Verstorbenen ausfindig zu machen, daß das Erbe antreten kann. Wir bitten Sie, unseren Vorschlag anzunehmen und versichern Ihnen, daß alles absolut risikofrei für Sie ablaufen wird. Wir werden Sie mit 5 Millionen US$ an der Transaktion beteiligen, den restlichen Betrag werden meine Kollegen und ich für. Falls Sie interessiert sind, schicken Sie mir bitte folgende Angaben: 1. Name/Firmen name um die erforderlichen Dokumente vorzubereitenp 2. Bankdaten: Konto-Nummer, Swift Code, Kontoinhaber 3. Persönliche Telefon- und Fax-Nummern An meine privat E-mail: (dngoye(a)walla.com) mit Ihrer vertraulichen Telefon-Nr., Fax-Nr., E-mail Anschrift, damit ich Ihnen die weiteren relevanten Details in dieser Sache mitteilen kann. Vielen Dank im voraus. Wir bitten sie eindringlich, die Angelegenheit vertraulich zu behandeln. Bitte antworten Sie mir schnellstmöglich und Gott segne sie. Mit freundlichen grussen, Daniel Ngoye.

1 0

Any luck finding NetApp NACA 7.0 certification questions?
by sarath g 27 Nov '05

27 Nov '05

Hi, I found your messages, i am looking for NetApp 7.0 certification NACA useful questions or material, i can help on Veritas foundation suite, which i am going for exam next week. Awaiting for your earliest response please. Thanks & rgds, Sarath. ---------------------------- I fond the NetApp exams to be probably some of the best in regards to the following: 1) They do not ask questions that are on notes in the training materials. 2) The questions are all on relavent information that is contained in the training materials 3) There are 5 questions related to experience in working with the Filer This is done to help eliminate the 'paper' certifications. 4) On the above experience questions should not cause you to fail if you have studied the training material. 5) After any of the exams I've been able to go to the training material and find the answer rather easily. From other vendors, I am still looking for answers to. Good Luck on the Exams. I also hear that NetApp is changing the Certification Process yet again. Alan, NACE -----Original Message----- From: ">owner-toasters(a)mathworks.com [mailto:">owner-toasters(a)mathworks.com] On Behalf Of Jacek Nogala Sent: Monday, May 09, 2005 4:28 AM To: ">toasters(a)mathworks.com Subject: New certification path (NACP/NACA) Some time ago I have passed exams required for NetApp Certified Professional certification. Unfortunately NetApp does not permit for any upgrades to new path and I have to pass new exams from scratch. Can anyone share with me some experience from new exams (I am not asking about explicit questions or other secret stuff)? My past experience was not very good: 1. due small number of questions (30 per exam) it is not so difficult to fail exam by simple mistake or obscure question 2. I have found several question that (without aby doubts) could not be answered without additional data AFAIK problem no 1 is still valid... Best regards, Jacek --------------------------------- Yahoo! Messenger NEW - crystal clear PC to PC calling worldwide with voicemail

1 0

REPRESENTATIVE
by Daniel Ndiaye-Nkono 26 Nov '05

26 Nov '05

TIMBERLAND IMPORT & EXPORT COMPANY 247 OKASAWA WAY,CENTRAL KWALA LUMPUR MALAYSIA EMAIL:citec_ndaniel@msn.com ATTN: (REQUEST FOR REPRESENTATIVE.) Sir It is my pleasure to write you in respect of our organisation. We are experts in the sale of TIMBER and RUBBER products.We often export to Canada/America and other parts of Europe. We are searching for representatives who can serve as a medium of getting our funds from our costumers in Canada/America/Europe as well as making payments through these representatives to us. Please if you are interested in transacting business in view of being one of our agents, so that our clients could make payments to you on our behalf . Compensations will be given and other renumeration benefits. Contact us for more information, If this proposal is acceptable to you. Note that, as our representative, you will receive 10%(ten percent) of whatever amount you clear for the company and the balance will be paid into an account we will provide for you.If the conditions stipulated above is accepted by you, do not hesitate to contact us by emailing the following to us: (1)Your full names: (2)Contact address: (3)Phone/fax numbers: (4)Occupation and (5)Age For more clarifications please contact me through my personal email; citec_ndaniel(a)msn.com, Best regards Daniel Ndiaye-Nkono.(Ceo)

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters