toasters

toasters@lists.teaparty.net

13515 discussions

RE: Just a spam resource now...
by Sphar, Mike 20 Mar '06

20 Mar '06

This comes up every so often, but the reason given that the list was open to non-subscribers is because if it didn't then netapp employees wouldn't be able to post, as they receive it through a local exploder. A decision way back at the time was made that the pain of getting spam was worth the value of having Netapp employee's contributions. -- Michael W. Sphar - IS&T - Lead Systems Administrator SMBU Engineering Support Services, BMC Software -----Original Message----- From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Ferrett, Simon Sent: Tuesday, March 14, 2006 10:37 AM To: toasters(a)mathworks.com Subject: RE: Just a spam resource now... I'd think that moderating new subscribers until they've made a couple of salient on-topic posts that indicate they're not spam-machines would probably go a long way to addressing the issue. I'm not sure if the list owner, or anyone, has time to do that (or what the rate of new subscribers is) though... Simon.

3 2

RE: Mixed Mode
by Sphar, Mike 20 Mar '06

20 Mar '06

I've never allowed Mixed Mode on my filers, another IT department here does though, and I've dealt with the results. Personally, I think it should be called "Why are these file permissions broken again?" Mode. -- Michael W. Sphar - IS&T - Lead Systems Administrator SMBU Engineering Support Services, BMC Software ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of JONES P.S. Sent: Wednesday, March 15, 2006 9:13 AM To: Tracy Russell; toasters(a)mathworks.com Subject: RE: Mixed Mode I trust this is an individual's surmise and no more. I have not heard of this remote possibility in any shape or form. We rely absolutely on mixed mode presentation to our users; its one of the keystone elements of our single authentication, single filestore architecture. Losing this would be too much to contemplate. Paul Jones, B.Sc, M.Sc, Ph.D. - Head of Systems Services, Information Technology Service, Durham University, South Road, Durham DH1 3LE Email: p.s.jones(a)durham.ac.uk Phone/Fax: 0191 334 2749/2701 ________________________________ From: owner-toasters(a)mathworks.com on behalf of Tracy Russell Sent: Wed 3/15/2006 2:19 PM To: toasters(a)mathworks.com Subject: Mixed Mode Does anyone know the future of the security mode -- "mixed mode"? Several co-workers returned from NetApp training stating that this particular mode is not encouraged and may be dropped in the not too distant future from NetApp support. Has anyone else heard this or can confirm this to any degree? We are about to set up a new Filer and I'm trying to decide what to do with a volume that is currently configured for mixed mode security on an old Filer. If anyone has experiences changes from mixed mode to either all CIFS or NFS, I'd appreciate their inputs as well. Thanks. Tracy

2 1

RE: ServerProtect for NetApps: Alerting Users
by Sphar, Mike 20 Mar '06

20 Mar '06

What version of OnTap are you using? We're running 6.5.5 and there is a vscan option "client_msgbox". I know about this because we had to turn it off due to a problem with false positives that we couldn't get a resolution on from Mcafee. (Basically no matter what we set the timeout to, on large files the scanner would send back a "still scanning..." message, which the filer would interpret as a virus being identified.) -- Michael W. Sphar - IS&T - Lead Systems Administrator SMBU Engineering Support Services, BMC Software ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Sewell, Cathy Sent: Friday, March 10, 2006 11:41 AM To: toasters(a)mathworks.com Subject: ServerProtect for NetApps: Alerting Users We are using TrendMicro's ServerProtect for NetApps to virus scan all files incoming/outgoing from our NetApps Filers. As expected, when a user attempts to store a file containing malware on a Filer, ServerProtect appropriately takes action on the file (attempting to clean it, then, if that fails, quarantining or deleting the file). While ServerProtect does have some limited alerting capabilities and we do have it setup to alert our IS group when a file is quarantined or deleted, ServerProtect is apparently unable to alert the user - the person who was attempting to store the file on the Filer. Vscan on the Filer initiates the scan of the file, handing it off to the ServerProtect server for scanning, apparently without user information. From the user's perspective, they copy or move a file to the Filer and the file completely disappears with no explanation. The Filer's Vscan does give ServerProtect the originating computer's name. However, using something like "net send <computer name>" is not an option for us as the Messaging service is disabled on our user's Windows workstations. Additionally our users work from a variety of OSes, making an e-mail based solution most desirable. If you've faced this situation, we'd like to know what you've successfully setup to alert users. Thank you for your ideas -

1 0

RE: FAS270c disk ownership
by Davin Milun 20 Mar '06

20 Mar '06

I don't have any FAS270's, but would the following work? If the new disks are the same size as the old disks, is to do a "disk replace" and migrate data from one of the old disks on the other "head" to the required disk on this new shelf. And then transfer ownership of that old disk that you "replaced" from, to the "head" that you want to have all the new disks? Davin. At 12:46, on Mar 20, 2006, "Glenn Walker" wrote: > > You have it down correctly - in the expansion shelves, one disk must be > owned by one head, the others can be owned by the other head. More > specifically, it's slot 1 and slot 0 that matter - this is for SES... > > ________________________________ > > From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] > On Behalf Of jeff.mery(a)ni.com > Sent: Monday, March 20, 2006 11:32 AM > To: toasters(a)mathworks.com > Subject: FAS270c disk ownership > > =20 > > > Hi Everyone,=20 > One of our sites has a FAS270c to which they are going to add a shelf > (DS14MkII w/ 5 x 300GB disks). These are the only FAS200-series systems > we have and we've never added hardware to them. We would like to add > all the disks to a single FAS270 node. However, based on what I can see > in the documentation, each system must own at least one of the SES disks > in each shelf.=20 > > This means that one disk must be assigned to node #1 and then the others > can all be assigned to node #2. Do I have it straight? I'd like to > assign them all to node #2 without wasting a 300GB disk on "management > overhead". Is that possible?=20 > > Jeff Mery - MCSE, MCP > National Instruments

1 0

RE: FAS270c disk ownership
by Glenn Walker 20 Mar '06

20 Mar '06

Jeff, You have it down correctly - in the expansion shelves, one disk must be owned by one head, the others can be owned by the other head. More specifically, it's slot 1 and slot 0 that matter - this is for SES... Glenn ________________________________ From: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of jeff.mery(a)ni.com Sent: Monday, March 20, 2006 11:32 AM To: toasters(a)mathworks.com Subject: FAS270c disk ownership Hi Everyone, One of our sites has a FAS270c to which they are going to add a shelf (DS14MkII w/ 5 x 300GB disks). These are the only FAS200-series systems we have and we've never added hardware to them. We would like to add all the disks to a single FAS270 node. However, based on what I can see in the documentation, each system must own at least one of the SES disks in each shelf. This means that one disk must be assigned to node #1 and then the others can all be assigned to node #2. Do I have it straight? I'd like to assign them all to node #2 without wasting a 300GB disk on "management overhead". Is that possible? Jeff Mery - MCSE, MCP National Instruments ------------------------------------------------------------------------ - "Allow me to extol the virtues of the Net Fairy, and of all the fantastic dorks that make the nice packets go from here to there. Amen." TB - Penny Arcade ------------------------------------------------------------------------ -

1 0

FAS270c disk ownership
by jeff.mery＠ni.com 20 Mar '06

20 Mar '06

Hi Everyone, One of our sites has a FAS270c to which they are going to add a shelf (DS14MkII w/ 5 x 300GB disks). These are the only FAS200-series systems we have and we've never added hardware to them. We would like to add all the disks to a single FAS270 node. However, based on what I can see in the documentation, each system must own at least one of the SES disks in each shelf. This means that one disk must be assigned to node #1 and then the others can all be assigned to node #2. Do I have it straight? I'd like to assign them all to node #2 without wasting a 300GB disk on "management overhead". Is that possible? Jeff Mery - MCSE, MCP National Instruments ------------------------------------------------------------------------- "Allow me to extol the virtues of the Net Fairy, and of all the fantastic dorks that make the nice packets go from here to there. Amen." TB - Penny Arcade -------------------------------------------------------------------------

1 0

Comply with the instructions
by m.vanjacobsen＠virgilio.it 20 Mar '06

20 Mar '06

This email confirms that you have received from the LOTERIE NATIONALE GROUP an official notification of your lottery winning in the FREELOTERY AUTOMATIC SUBSCRIPTION TICKET GAME (F.A.S.T). You have won a prize of Two Million Dollars($ 2,000,000.00) a prize payout of your winning has been approved by the LOTERIE NATIONALE GROUP. In accordance with the world lottery ordinance, you are authorized as the official lottery prize winner to immediately file in for your claims claims upon receipt of this mail. The FREELOTERY AUTOMATIC SUBSCRIPTION TICKET (F. A.S.T) GAME is an online promotional program organized by the LOTERIE NATIONALE GROUP. A total of 500,000 email addresses were entered for the FREELOTTO AUTOMATIC SUBSCRIPTION TICKET GAME (F.A.S.T). All email addresses entered for the game are submitted by our partner international email service providers/ marketing companies and public services providers. Winners are randomly selected systematically through our Electronic Random Selection System; (ERSS) no ticket was sold. Your email ID was included among the 500,000 email addresses that were entered for category A with the following details, Batch no LN 005271 with Ticket No. LN/BB090701: Ref no LN 4440180: Lucky no 11-06- 88 Serial no: LN/T55. Note that the Loterie Nationale will remit prize payout strictly to winners who officially file in for their prize claims. To begin the claim processing of your prize, you are advised to contact our licensed agent for category A with the information's below. Mr. Menno de Jong GLOBAL CONSULT B.V. TEL: 0031 649 851 501 Email: glbconsult(a)excite.it All winnings must be claimed not later than 14 days. You are to keep your winning details from the general public as a case of double claims would not be entertained. Anybody under the age of 18 and members of the affiliate bodies are not allowed to participate in this programme. Thanks for being part of our programme and once again Congratulation. Marijke van Jacobsen

1 0

REPRESENTATIVE NEEDE IN YOUR REGION
by s.shulaou＠virgilio.it 20 Mar '06

20 Mar '06

Dear Sir/Madam, I am Mr Shun Lao,Managinig Director of China Metallurgical Import & Export Company Limited(CMIE.CO.,LTD) a we are a group of division of Sinosteel Group ofCompanys. company who deal on import and exportation of raw Materials such as, cocoa,rubber,Cassava, non-metallic minerals such as Calcite,Barytes,Manganese Dioxide, Dolomite Mica ChinaClay,Mangnese Dioxide,Ferrous (Iron) etc intoCanada/America and presently Europe. We are solicitating for representatives who can helpus establish a medium of getting to our costumers in the Canada/America and Europe as well as making payments through you to us which you will be entitled to earn 10% of every payment made throughyou to us. Subject to your satisfaction to assist us, youwill be given the opportunity to negotiate your mode of which we will be paying for your services as our representative. THANK YOU VERY MUCH FOR YOUR ANTICIPATED COOPERATION. For more information,please contact me via my officialemail address at:onovson@netscape.net Yours truly, Mr Shun Lao Managing Director (CMIE.CO.,LTD)

1 0

Re: AW: show size of a qtree
by Tim McCarthy 20 Mar '06

20 Mar '06

something I always do. /etc/quotas #path_2_target type size numfiles * tree@/vol/vol0 - - * tree@/vol/vol1 - - etc... This way whenever you run a quota report on the filer or, from my previous post, run quota report via ssh and grep out what you are looking for, you can find it very easily Plus, you are not "restricting" size/number of files, but rather you are "monitoring" it. Also, that second dash is not necessary. --tmac Conzen, Christoph (C.) wrote: > ..a somewhat crude way could be in setting up quotas for the qtree - the command quota report will show the actual usage for the qtree. > > Regards, > Christoph > > -----Ursprüngliche Nachricht----- > Von: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] Im Auftrag von Willeke, Jochen > Gesendet: Montag, 20. März 2006 10:06 > An: toasters(a)mathworks.com > Betreff: show size of a qtree > > > Hi everybody, > > im just wondering if there is any way of showing the size of a qtree. I know that i can mount the qtree and run "du" under linux but i am looking for any ontapp command that does this job for me. > > Thanks in advance > > Jochen > >

1 0

AW: show size of a qtree
by Conzen, Christoph (C.) 20 Mar '06

20 Mar '06

...a somewhat crude way could be in setting up quotas for the qtree - the command quota report will show the actual usage for the qtree. Regards, Christoph -----Ursprüngliche Nachricht----- Von: owner-toasters(a)mathworks.com [mailto:owner-toasters@mathworks.com] Im Auftrag von Willeke, Jochen Gesendet: Montag, 20. März 2006 10:06 An: toasters(a)mathworks.com Betreff: show size of a qtree Hi everybody, im just wondering if there is any way of showing the size of a qtree. I know that i can mount the qtree and run "du" under linux but i am looking for any ontapp command that does this job for me. Thanks in advance Jochen

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters