toasters

toasters@lists.teaparty.net

13515 discussions

Re: Continuously available CIFS
by SE 28 Mar '19

28 Mar '19

Thank you Justin for your response. Since this is a four-node cluster, if I force this application’s CIFS traffic through a lif on HA-pair “A” to a volume on an aggr owned by a controller in HA-pair “B” would those sessions still be severed if I upgrade HA-pair “B”? Would “B”s takeover/giveback process of changing aggr ownership also require severing CIFS sessions? > On Mar 13, 2019, at 8:50 AM, Parisi, Justin <Justin.Parisi(a)netapp.com> wrote: > > Microsoft and NetApp stance is that CA shares are supported only for HyperV and SQL workloads at this time. > > -----Original Message----- > From: toasters-bounces(a)teaparty.net <toasters-bounces(a)teaparty.net> On Behalf Of s.eno via Toasters > Sent: Wednesday, March 13, 2019 8:39 AM > To: toasters(a)teaparty.net > Subject: > > NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe. > > > > > _______________________________________________ > Toasters mailing list > Toasters(a)teaparty.net > http://www.teaparty.net/mailman/listinfo/toasters On Mar 13, 2019, at 8:39 AM, s.eno <s.eno(a)me.com> wrote: Hi, Does anyone here utilize continuously available CIFS shares for anything other than Hyper-V and/or SQL? If so, do you have real-world results on how those shares do during ONTAP upgrades? I need to perform upgrades on a 4-node cluster and have a mission critical application that doesn’t like it when the takeover/giveback process severs its CIFS sessions. I’m trying to figure out a way to do this without causing downtime to the application which in-turn causes push-back on the upgrade plan. The application appears to be connecting to the shares via SMB3_1, so it should support CA, right? I’ve tested checking the CA box on one of its shares and the app drains connections to the share and stops sending any more traffic, so it appears to not like something related to that change. One of its shares, however, was provisioned with that box checked and that one works just fine as far as traffic & sessions go. -- Scott s.eno(a)me.com

4 5

FAS2240-4 and 9.1 support
by Alexander Griesser 28 Mar '19

28 Mar '19

Hey there, trying to repurpose some of my older filers here and wiped them now and wanted to install with 9.1. According to HWU, this should be supported and I'm running a few FAS2240-2 with 9.1PX already, without issues. I did upgrade to 9.1P17 on two of these FAS2240-4 and after the install, one of them did not boot anymore because it said, that this platform is not supported on the release. The second controller booted without issues and I have now netbooted 9.1P16, which shows the same behaviour: Controller A: Starting program at 0x80294e10 NetApp Data ONTAP 9.1P16 *************************************************** This platform is not supported in this release. The system will now halt *************************************************** Controller B: Starting program at 0x80294e10 NetApp Data ONTAP 9.1P16 md0: Preloaded image <http/_NETAPP/NETBOOT/91P16/rootfs.img> 256704512 bytes at 0xffffffff81543000 md1: Preloaded image <http/_NETAPP/NETBOOT/91P16/platfs2g.img> 335412736 bytes at 0xffffffff90a13000 Trying to mount root from ufs:/dev/md0.uzip [ro]... Copyright (C) 1992-2018 NetApp. All rights reserved. ******************************* * * * Press Ctrl-C for Boot Menu. * * * ******************************* Error: km_cdb_loader: couldn't open dump file CDB.mgwd Error opening /var/CDB.mgwd file. Firewall rules loaded. The Boot Menu will be presented because an alternate boot method was specified. Please choose one of the following: (1) Normal Boot. [...] Any ideas why Controller A thinks it does not support what Controller B does? Best, Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

1 2

Continuously available CIFS
by s.eno 13 Mar '19

13 Mar '19

Hi, Does anyone here utilize continuously available CIFS shares for anything other than Hyper-V and/or SQL? If so, do you have real-world results on how those shares do during ONTAP upgrades? I need to perform upgrades on a 4-node cluster and have a mission critical application that doesn’t like it when the takeover/giveback process severs its CIFS sessions. I’m trying to figure out a way to do this without causing downtime to the application which in-turn causes push-back on the upgrade plan. The application appears to be connecting to the shares via SMB3_1, so it should support CA, right? I’ve tested checking the CA box on one of its shares and the app drains connections to the share and stops sending any more traffic, so it appears to not like something related to that change. One of its shares, however, was provisioned with that box checked and that one works just fine as far as traffic & sessions go. -- Scott s.eno(a)me.com

1 0

VMware datastore stats integration
by Ian Ehrenwald 11 Mar '19

11 Mar '19

I think I know the answer to this already (which is NO) but maybe I'm missing something not so obvious. Is there a way to insert into vSphere some storage statistics from NFS datastores on a per-VM basis? Eg, I want to see that VM prod-xyz is using 3924 IOPS and has 18ms write latency, and I want to see it through the single pane of glass that is vCenter Server in the VM specific statistics. I'm going to guess that the answer is no, not without some sort of plugin to vCenter that talks to an ONTAP API and tracks operations on a file level, keying from the VMDK path(s) in the VMX file. I'd also love to see those stats extended to per-VM physical and logical disk space utilization. I have no idea if those sort of stats are even available, and if they were, I would hope that someone on the NetApp side of the equation would have done this already as part of VSC. It would make reporting to management a lot easier. Just throwing it out there.. Ian Ehrenwald Senior Infrastructure Engineer Hachette Book Group, Inc. 1.617.263.1948 / ian.ehrenwald(a)hbgusa.com This may contain confidential material. If you are not an intended recipient, please notify the sender, delete immediately, and understand that no disclosure or reliance on the information herein is permitted. Hachette Book Group may monitor email to and from our network.

2 2

Re: please provide the complete steps for creating new lacp ports..
by Yuvaraja Shivaram 11 Mar '19

11 Mar '19

Hi Chris and All, cluster::> vlan show Network Network Node VLAN Name Port VLAN ID MAC Address ------ --------- ------- -------- ----------------- cluster-01 a0a-608 a0a 608 xxxx cluster-02 a0a-608 a0a 608 xxxx cluster::> broadcast-domain show (network port broadcast-domain show) IPspace Broadcast Update Name Domain Name MTU Port List Status Details ------- ----------- ------ ----------------------------- -------------- Default 10G_Data 9000 cluster-02:a0a-608 complete cluster-01:a0a-608 complete cluster::> failover-groups show (network interface failover-groups show) Failover Vserver Group Targets ---------------- ---------------- -------------------------------------------- cluster 10G_Data cluster-02:a0a-608, cluster-01:a0a-608 cluster::> net port show (network port show) Node: cluster-01 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- a0a Default - up 9000 auto/- healthy a0a-608 Default 10G_Data up 9000 auto/- healthy Node: cluster-02 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- a0a Default - up 9000 auto/- healthy a0a-608 Default 10G_Data up 9000 auto/- healthy bng-engodcdata1::> net int show (network interface show) vserver1 lif_data1 up/up xxxx_ip cluster-01 a0a-608 true lif_data2 up/up xxxx_ip cluster-02 a0a-608 true vserver_mgmt up/up xxxx_ip cluster-01 a0a-608 true ==============================================All the above inputs are already confiugred for a0a interface group(e0c,e0d ports) and currently it is using for production... Below are the steps to configure new interface group e0e, e0f with the interface group name as "a0b...." 1>using same vlan of 608 (which is already used in a0a interface.....) 2>broadcast domain and failover groups i would use the same one which is already using by the a0a interface group....... cluster-1::>net port ifgrp create –node cluster-01 –ifgrp a0b -distr-func ip -mode multimode_lacp cluster-1::>net port ifgrp create –node cluster-02 –ifgrp a0b -distr-func ip -mode multimode_lacp cluster-1::> network port ifgrp add-port -node cluster-01 -ifgrp a0b -port e0e cluster-1::> network port ifgrp add-port -node cluster-01 -ifgrp a0b -port e0f cluster-1::> network port ifgrp add-port -node cluster-02 -ifgrp a0b -port e0e cluster-1::> network port ifgrp add-port -node cluster-02 -ifgrp a0b -port e0f cluster-1::>net port modify –node cluster-01 –port a0b–mtu 9000 cluster-1::>net port modify –node cluster-02 –port a0b–mtu 9000 cluster-1::>net port vlan create –node cluster-01 –vlan-name a0b-608 (need to chk on this as vlan-add or vlan add is not coming) cluster-1::>net port vlan create –node cluster-02 –vlan-name a0b-608 so above step would take automatically vlan id and port details without causing any issue to already configured vlan id of a0a-608 right ? adding ports to broadcast domain 10G_data..which is already using by a0a ifgrp cluster-1::>network port broadcast-domain add-ports -broadcast-domain 10G_Data -ports cluster-01:a0b-608, cluster-02:a0b-608 -ipspace Default adding failover-groups to 10G_Data(which is already using by a0a ifgrp) cluster-1::>failover-groups add-targets -vserver cluster -failover-group 10G_Data -targets cluster-02:a0b-708, cluster-01:a0b-708 then i would create , vserver02 and respective lifs by using a0b-608 interface group..... Please let me know if anything to be added..and can we use the current broadcast domain and failover groups to configure new interface group of a0b ? or it should have it's own ? Regards raj.. On Fri, Mar 8, 2019 at 4:41 PM Yuvaraja Shivaram <yuvaraja.kishan(a)gmail.com> wrote: > I just logged out, > > Will send the complete plan, along with commands may be tomorrow, plz > help me if anything wrong in that > > Regards > Raj > > On Fri, Mar 8, 2019 at 4:16 PM Chris Hague <Chris_Hague(a)ajg.com> wrote: > >> Why not add the other 2 ports to your existing a0a ifgrp? >> >> >> >> To answer your question, if you have already created your a0b ifgrp, >> adding a vlan (vlan create a0b-608) is non-disruptive. >> >> >> >> *From:* toasters-bounces(a)teaparty.net <toasters-bounces(a)teaparty.net> *On >> Behalf Of *Yuvaraja Shivaram >> *Sent:* 08 March 2019 10:36 >> *To:* Alexander Griesser <AGriesser(a)anexia-it.com> >> *Cc:* toasters <toasters(a)teaparty.net> >> *Subject:* Re: please provide the complete steps for creating new lacp >> ports.. >> >> >> >> very good question...Alexander, >> >> >> >> earlier we were using only 2 ports, leaving other 2 ports keeping idle, >> so we are configuring other 2 ports and configuring LACP out of it,,,as of >> now do not have any plan to use any other vlan id's other than 608, ,which >> is already functional in the interface group as a0a, so now that same vlan >> id can be used for the new interface group a0b...? will that create any >> outage (since i am not getting vlan add..options similar to 7mode)... >> >> >> >> Regards >> >> Raj, >> >> >> >> >> >> On Fri, Mar 8, 2019 at 3:54 PM Alexander Griesser < >> AGriesser(a)anexia-it.com> wrote: >> >> Hey, >> >> >> >> why do you want to have the same VLAN on two different interface groups? >> >> >> >> *Alexander Griesser* >> >> Head of Systems Operations >> >> >> >> ANEXIA Internetdienstleistungs GmbH >> >> >> >> E-Mail: AGriesser(a)anexia-it.com >> >> Web: http://www.anexia-it.com >> >> >> >> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt >> >> Geschäftsführer: Alexander Windbichler >> >> Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT >> U63216601 >> >> >> >> *From:* toasters-bounces(a)teaparty.net <toasters-bounces(a)teaparty.net> *On >> Behalf Of *Yuvaraja Shivaram >> *Sent:* Friday, March 8, 2019 11:22 AM >> *To:* toasters <toasters(a)teaparty.net> >> *Subject:* please provide the complete steps for creating new lacp >> ports.. >> >> >> >> Hi All, >> >> >> >> Is there any way to add vlan to existing vlan-id, just how we do at >> 7mode... >> >> >> >> curretly we are using 9.4p1 cmode.... >> >> >> >> below vlan already exists....so now if i want to create a0b for the same >> vlan id 608, am not getting vlan add here, so.. >> >> >> >> if i use ,network port vlan create -node cluster-01 -vlan-name >> a0b-608... is there any outage to this id 608, which is already running in >> production...? >> >> >> >> Network Network >> >> Node VLAN Name Port VLAN ID MAC Address >> >> ------ --------- ------- -------- ----------------- >> >> cluster-01 >> >> a0a-608 >> >> a0a 608 xxxx >> >> cluster-02 >> >> a0a-608 >> >> a0a 608 xxxx >> >> >> >> >> This email is being sent by a subsidiary of Arthur J. Gallagher Holdings >> (UK) Limited, part of the Arthur J. Gallagher & Co. global group of >> companies. For details of the registered office, company number and, where >> applicable, regulated status of our subsidiaries, please visit >> https://www.ajginternational.com/legal-regulatory-information/. >> >> We are the data controller of any personal information you provide to us >> or personal information that has been provided to us by a third party. We >> collect and process information about you in order to arrange insurance >> policies and to process claims. Your information is also used for business >> purposes such as fraud prevention and detection and financial management. >> This may involve sharing your information with third parties such as >> insurers, reinsurers, other brokers, claims handlers, loss adjusters, >> credit reference agencies, service providers, professional advisors, our >> regulators, police and government agencies or fraud prevention agencies. >> >> We may record telephone calls to help us monitor and improve the service >> we provide. For further information on how your information is used and >> your rights in relation to your information please see our privacy notice >> at https://www.ajginternational.com/Privacy-Policy/. If you are >> providing personal data of another individual to us, you must tell them you >> are providing their information to us and show them a copy of this notice. >> >> Where you are obtaining a non-consumer policy of (re)insurance, or cover >> for additional risks or renewal under an existing policy, you are required >> to make a fair presentation of the risk to a (re)insurer which discloses >> every material circumstance which you know or ought to know relating to the >> risk to be insured. A circumstance is material if it would influence the >> judgment of a prudent insurer in determining whether to provide insurance >> for the risk and, if so, on what terms. Disclosure must be reasonably clear >> and accessible to a prudent insurer and made in good faith. The >> aforementioned duty of disclosure is the applicable duty under the laws of >> England and Wales. If your policy is not subject to English law you are >> expected to disclose risk information in accordance with the requirements >> of the applicable law. In such circumstances we expect you will disclose >> risk information at least equal to the standard required under English law >> and where the applicable law requires you to disclose information over and >> above the level required under English law you will provide such >> information in accordance with that law. >> >> Where you are obtaining a consumer policy of insurance, you must read >> each question and answer honestly and fully and must take reasonable care >> to not make a misrepresentation. >> >> Failure to comply with the above disclosure requirements, as they apply >> to you, could mean that your policy of (re)insurance is void, its terms are >> materially altered or that (re)insurers are not liable to pay all or part >> of your claim(s). If you are in any doubt as to your obligations you should >> ask your usual contact. >> >> This e-mail and any attachments are CONFIDENTIAL and may contain legally >> privileged information. If you are not the intended recipient of this >> e-mail message, please telephone or e-mail us immediately, delete this >> message from your system and do not read, copy, distribute, disclose or >> otherwise use this e-mail message and any attachments. Although the above >> company has taken reasonable precautions to ensure this e-mail and any >> attachments are free of any virus or other defect that may affect your >> computer, it is the responsibility of the recipient to ensure that it is >> virus free and the above company does not accept any responsibility for any >> loss or damage arising in any way from its use.et >> >

3 2

RE: please provide the complete steps for creating new lacp ports..
by Alexander Griesser 08 Mar '19

08 Mar '19

Alright – with regards to Chris‘ question: I did assume that a0a currently is not LACP or connected to a different set of switches, which is probably the reason, why you cannot just add the physical ports in a0b to the existing ifgrp a0a, right? Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 From: Yuvaraja Shivaram <yuvaraja.kishan(a)gmail.com> Sent: Friday, March 8, 2019 11:48 AM To: Alexander Griesser <AGriesser(a)anexia-it.com> Subject: Re: please provide the complete steps for creating new lacp ports.. Thanks a lot Alexander for your update, since it is prod, i do not want to take any risk... will send you the complete step before monday(may be tommorrow), let me know if i am missing anything in that.. Regards Yuvaraja On Fri, Mar 8, 2019 at 4:08 PM Alexander Griesser <AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com>> wrote: CDOT is non disruptive with most network operations, so you could either migrate all LIFs off from one physical node to the other one, reconfigure the interface group on node A then to be LACP with the new ports and move the LIFs back then, if what you’re trying to achieve is a seamless migration of your services to different physical ports with a different aggregation method. You can use the same VLAN on both physical interfaces, of course – no problem and it won’t affect the availability of the first tagged interface on a0a. Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 From: Yuvaraja Shivaram <yuvaraja.kishan(a)gmail.com<mailto:yuvaraja.kishan@gmail.com>> Sent: Friday, March 8, 2019 11:36 AM To: Alexander Griesser <AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com>> Cc: toasters <toasters(a)teaparty.net<mailto:toasters@teaparty.net>> Subject: Re: please provide the complete steps for creating new lacp ports.. very good question...Alexander, earlier we were using only 2 ports, leaving other 2 ports keeping idle, so we are configuring other 2 ports and configuring LACP out of it,,,as of now do not have any plan to use any other vlan id's other than 608, ,which is already functional in the interface group as a0a, so now that same vlan id can be used for the new interface group a0b...? will that create any outage (since i am not getting vlan add..options similar to 7mode)... Regards Raj, On Fri, Mar 8, 2019 at 3:54 PM Alexander Griesser <AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com>> wrote: Hey, why do you want to have the same VLAN on two different interface groups? Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser(a)anexia-it.com<mailto:AGriesser@anexia-it.com> Web: http://www.anexia-it.com<http://www.anexia-it.com/> Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601 From: toasters-bounces(a)teaparty.net<mailto:toasters-bounces@teaparty.net> <toasters-bounces(a)teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Yuvaraja Shivaram Sent: Friday, March 8, 2019 11:22 AM To: toasters <toasters(a)teaparty.net<mailto:toasters@teaparty.net>> Subject: please provide the complete steps for creating new lacp ports.. Hi All, Is there any way to add vlan to existing vlan-id, just how we do at 7mode... curretly we are using 9.4p1 cmode.... below vlan already exists....so now if i want to create a0b for the same vlan id 608, am not getting vlan add here, so.. if i use ,network port vlan create -node cluster-01 -vlan-name a0b-608... is there any outage to this id 608, which is already running in production...? Network Network Node VLAN Name Port VLAN ID MAC Address ------ --------- ------- -------- ----------------- cluster-01 a0a-608 a0a 608 xxxx cluster-02 a0a-608 a0a 608 xxxx

3 3

please provide the complete steps for creating new lacp ports..
by Yuvaraja Shivaram 08 Mar '19

08 Mar '19

Hi All, Is there any way to add vlan to existing vlan-id, just how we do at 7mode... curretly we are using 9.4p1 cmode.... below vlan already exists....so now if i want to create a0b for the same vlan id 608, am not getting vlan add here, so.. if i use ,network port vlan create -node cluster-01 -vlan-name a0b-608... is there any outage to this id 608, which is already running in production...? Network Network Node VLAN Name Port VLAN ID MAC Address ------ --------- ------- -------- ----------------- cluster-01 a0a-608 a0a 608 xxxx cluster-02 a0a-608 a0a 608 xxxx

4 5

Azure CVO and CPU
by SE 06 Mar '19

06 Mar '19

Hi, Is anyone here using Cloud Volumes ONTAP in Azure? I’m trying to figure out why it is the Azure dashboard claims our CVO instance is always running at 100% CPU, but if one ssh’s to the virtual appliance and does a sysstat -m on the node it shows all cpus at 0%-1%. Any ideas on the discrepancy between what Azure sees and what ONTAP claims? — Scott

3 3

vol move throughput throttle
by Mike Thompson 28 Feb '19

28 Feb '19

did a throttle to volume move throughput throttle ever make it into ontap 9? I see there was some discussion about this on the list a few years back, with the consensus that it was a known desire to have a throttle in there, and someday maybe it would make it in. I see there is a throttle on the number of concurrent moves, but don't see anything specific to throughput rate.

3 3

environmental control?
by Mark Flint 11 Feb '19

11 Feb '19

Hi list, does anyone know if there’s an official shutdown temp for a 3270 FAS in HA 7-mode? I can see the operating temperature list, and have wandered through the environment settings, and first impression is that it’s a function of inflow temp being too high, and possibly two other subsystem reporting too high, for environmental shutdown to occur, but that’s just guessing :) I’dreally like a link to a doc that says “w3270’s shutdown at 54 degrees celsius” or similar……. TIA, `Mark -- The Wellcome Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

4 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters