toasters October 1999

toasters@lists.teaparty.net

81 participants
89 discussions

Re: Easiest way to migrate data off of Filer
by dnb＠ccs.neu.edu 20 Oct '99

20 Oct '99

Bennett Todd <bet(a)mordor.net> writes: > If you have the GNU findutils first on your PATH (which I always recommend > doing), you can use > cd /src;find dir -depth -print0|cpio -p0dm /dst Quick note about this: unless you have patched it, the find command will pick up the .snapshot dirs as well. There was a patch posted to this list a while back. If anyone can't find in the archives, drop me a note and I'll send it along. It works really well (we replaced our default install … [View More]

1 0

RE: Source for a non-root quota program?
by Thompson, Tim 20 Oct '99

20 Oct '99

> So what we want is a program (Solaris preferred, Linux or NT > might be acceptable) that will allow any user to check the > total usage for any other user. >... > Does NetApp have an official program that does this? > Possibly a program that someone has contributed? In the "Tools & Utilities" section of the NOW (http://now.netapp.com) site, in the "Toolshed" area, you'll find a "quota_tools" entry. That package contains several utilities for quotas, including a perl … [View More]

2 1

Re: Easiest way to migrate data off of Filer
by sirbruce＠ix.netcom.com 20 Oct '99

20 Oct '99

On 10/19/99 12:52:29 you wrote: > >Hi, > >We're running an F540 with Ontap 5.3.2D3, setup for NFS and CIFS services. Most >(~95%) of our NFS clients are Solaris 2.6 machines. I would like to know if >there is an easy way to migrate home-dir data off of the filer and onto a Sun >server (Enterprise 450 with Solaris 2.6). If you're storing CIFS data, you'll of course lose it. Dump and restore should still work, if you want to do that; you can even do it by rsh over the … [View More]

2 1

Re: Easiest way to migrate data off of Filer
by dnb＠ccs.neu.edu 20 Oct '99

20 Oct '99

I would think the rsync program (which is what we used to take our data off Sun and Auspex boxen and put it *on* our filer) would be a good choice. We also use it daily to backup local data from our main data servers on to our netapp prior to moving the data to tape. It is a really good tool. Rsync has options to exclude certain files/dirs which I suspect could easily be used to tell to ignore snapshots (though I would tend towards hiding them as another person suggested). Rsync can be found … [View More]

2 1

Re: Easiest way to migrate data off of Filer
by Michael Salmon 20 Oct '99

20 Oct '99

+----- On Tue, 19 Oct 1999 12:52:29 PDT, Yicheng Li-R37424 writes: | Hi, | | We're running an F540 with Ontap 5.3.2D3, setup for NFS and CIFS | services. Most (~95%) of our NFS clients are Solaris 2.6 machines. I | would like to know if there is an easy way to migrate home-dir data off | of the filer and onto a Sun server (Enterprise 450 with Solaris 2.6). | | Doing a plain 'cp' tends to skip over .* files and is a bit tricky about | retaining permissions. We also have a script 'copy_dir' … [View More]

1 0

RE: "ypset" needs added to common command set
by Hackworth, Brian 19 Oct '99

19 Oct '99

: I would like to see the "ypset" command added In a forthcoming update release for 5.3, there is a new option to allow you to specify the list of NIS servers the filer should try to use (or "*" to use the old broadcast method). This obviates most of the need for ypset. In the next major functionality release, the family of yp commands are moved out of "rc_toggle_basic" into the main OnTap command set. As an engineer, I'm not allowed to suggest any dates for these releases. - Brian Hackworth

1 0

Re: "ypset" needs added to common command set
by Devi Nagaraj 19 Oct '99

19 Oct '99

Hi, NIS has been revamped in Data ONTAP 5.3.3 ( which is a special release available upon request). This supports multiple preferred NIS servers. All these are available in the soon to be released Data ONTAP 5.3.4. Thanks, -Devi At 03:58 PM 10/19/99 -0500, sirbruce(a)ix.netcom.com wrote: >On 10/19/99 15:13:26 you wrote: >> >>I would like to see the "ypset" command added to the common Data Ontap >>command >>set. We have several Netapps where we need to use the "… [View More]

1 0

Re: mailboxes on toaster
by tkaczma＠gryf.net 19 Oct '99

19 Oct '99

On Tue, 19 Oct 1999, Jim McCoy wrote: > >> 2) Inode cost should not be overlooked. You get at most 32 million per > >> volume, so if you have a lot of mailboxes a maildir or other > >> one-file-per-message scheme will chew through your inode limit long > before > >> you run out of disk space on that volume. > > > >BTW, how did you arrive at that number? > > > Experimentally and asking netapp. It may be that they have increased the … [View More]

2 1

Re: "ypset" needs added to common command set
by sirbruce＠ix.netcom.com 19 Oct '99

19 Oct '99

On 10/19/99 15:13:26 you wrote: > >I would like to see the "ypset" command added to the common Data Ontap >command >set. We have several Netapps where we need to use the "ypset" command but in >order to run the command and make it permanent, you have to go into >rc_toggle_basic mode. For a permanent fix we have to add "rc_toggle_basic", >"ypset nisserver", "rc_toggle_basic" to the rc file. Is there any plans to >make "ypset" part of the common Data Ontap command set? … [View More]

1 0

Easiest way to migrate data off of Filer
by Yicheng Li-R37424 19 Oct '99

19 Oct '99

Hi, We're running an F540 with Ontap 5.3.2D3, setup for NFS and CIFS services. Most (~95%) of our NFS clients are Solaris 2.6 machines. I would like to know if there is an easy way to migrate home-dir data off of the filer and onto a Sun server (Enterprise 450 with Solaris 2.6). Doing a plain 'cp' tends to skip over .* files and is a bit tricky about retaining permissions. We also have a script 'copy_dir' that uses the copy_io command, but it takes an extraordinarily long time. We're … [View More]

2 1

← Newer
1
2
3
4
5
6
7
8
9
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

toasters October 1999