You can use volcopy I believe. This is how we moved our disk storage from SCSI to fibre a while back. Also, ndmp copy, from ndmp.org works well.

Simon

-----Original Message----- From: Frank Bonnet [mailto:bonnetf@bart.esiee.fr] Sent: 12 November 2002 15:48 To: toasters@mathworks.com Subject: filer to filer copy

Hi

I want to transfert all users data from a F85 to a F87 is there some command to "safely" do such transfert I expect tar from a third remote machine would be very slow to do the job.

The two filers are attached to the LAN with a gigabit fiber link on the same switch.

THX