According to NetApp, ESX v3 is not yet supported by the 940Cs. Has anyone had a change to test this set up (or any other unsupported clustered filer) in a live environment? I heard we should have support by September, but my server team is hot to trot to deploy before then.
Thanks for any input,
Hadrian Baron Network Engineer VEGAS.com Office: 702-992-4853 Cell: 702-553-5699
We have tried on FAS960 and FAS3050c and this works fine.
Because we all are running ontap, when one model works (is supported), they all must work. So we don't wait on the certification of our FAS3050c and we start with the roll out. Of course, we start with less important servers. At the time that we will move our more important servers, that support issue is solved.
Best Regards,
Reinoud Reynders
University Hospital Leuven
Belgium
________________________________
Van: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] Namens Hadrian Baron Verzonden: vrijdag 28 juli 2006 23:57 Aan: toasters@mathworks.com Onderwerp: VMWare ESX 3 + 940Cs?
According to NetApp, ESX v3 is not yet supported by the 940Cs. Has anyone had a change to test this set up (or any other unsupported clustered filer) in a live environment? I heard we should have support by September, but my server team is hot to trot to deploy before then.
Thanks for any input,
Hadrian Baron Network Engineer VEGAS.com Office: 702-992-4853 Cell: 702-553-5699
-
Hadrian Baron -
Reinoud Reynders