Hi guys,
I've just received an FAS6030 cluster.
The system shipped with ONTAP 7.2. I've upgraded the system to 7.2.1.1
bfiler09> version -b 1:/x86_64/kernel/primary.krn: OS 7.2.1.1 1:/backup/x86_64/kernel/primary.krn: OS 7.2 1:/x86_64/diag/diag.krn: 4.7 1:/x86_64/firmware/excelsio/firmware.img: Firmware 1.2.0 1:/x86_64/firmware/DrWho/firmware.img: Firmware 2.0.0 1:/boot/loader: Loader 1.2.1
Do you guys have much experience of disk ownership. On our FAS940 clusters, disk ownership was hardware based.
FAS6030> disk show -v DISK OWNER POOL SERIAL NUMBER ------------ ------------- ----- ------------- 0e.40 FAS6030 (118041055) Pool0 ZAKTSGAH
Tue Feb 20 11:13:43 GMT [localhost: diskown.isEnabled:info]: replayed event: software ownership has been enabled for this system
Despite reading the below Netapp doc, I'm no closer to making a decision as to whether to retain the disk ownership option or remove it from my system.
http://now.netapp.com/NOW/knowledge/docs/ontap/rel7211/ http://now.netapp.com/NOW/knowledge/docs/ontap/rel7211/html/ontap/mgmtsag/3disk6.htm#1426071 html/ontap/mgmtsag/3disk6.htm#1426071 http://now.netapp.com/NOW/knowledge/docs/ontap/rel7211/html/ontap/mgmtsag/3disk6.htm#1426071
Any feedback on the topic would be much appreciated.
Thanks alot, Philip
Hi Phillip,
with the 6000er series there is no option between hardware-based and software-based disk ownership.
You have to use software-based one (afaik).
So removing the ownership of the disks will result in loosing disks. You will be able to see them with "disk show -n" which shows all unassigned disks and then reassign them with "disk assign all -o [filername]".
Be carefull to use this commands in cluster configuration! I have never tried but i suppose it to be possible to assgin ownership from partner-disks to a filer.
You can also use "disk assign [diskname] -o [filername]" which gives you control but will take some minutes :D
Is this what you asked for?!?
Regards
Jochen
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Philip Boyle Sent: Wednesday, February 21, 2007 5:25 PM To: toasters@mathworks.com Subject: Software Ownership Query
Hi guys,
I've just received an FAS6030 cluster.
The system shipped with ONTAP 7.2. I've upgraded the system to 7.2.1.1
bfiler09> version -b 1:/x86_64/kernel/primary.krn: OS 7.2.1.1 1:/backup/x86_64/kernel/primary.krn: OS 7.2 1:/x86_64/diag/diag.krn: 4.7 1:/x86_64/firmware/excelsio/firmware.img: Firmware 1.2.0 1:/x86_64/firmware/DrWho/firmware.img: Firmware 2.0.0 1:/boot/loader: Loader 1.2.1
Do you guys have much experience of disk ownership. On our FAS940 clusters, disk ownership was hardware based.
FAS6030> disk show -v DISK OWNER POOL SERIAL NUMBER ------------ ------------- ----- ------------- 0e.40 FAS6030 (118041055) Pool0 ZAKTSGAH
Tue Feb 20 11:13:43 GMT [localhost: diskown.isEnabled:info]: replayed event: software ownership has been enabled for this system
Despite reading the below Netapp doc, I'm no closer to making a decision
as to whether to retain the disk ownership option or remove it from my system.
http://now.netapp.com/NOW/knowledge/docs/ontap/rel7211/ http://now.netapp.com/NOW/knowledge/docs/ontap/rel7211/html/ontap/mgmts ag/3disk6.htm#1426071 html/ontap/mgmtsag/3disk6.htm#1426071 http://now.netapp.com/NOW/knowledge/docs/ontap/rel7211/html/ontap/mgmts ag/3disk6.htm#1426071
Any feedback on the topic would be much appreciated.
Thanks alot, Philip
-
Philip Boyle -
Willeke, Jochen