I have a FAS3240c that has been running for years. I noticed today, while putting in some new shelves, that the IOM modules in the last shelf of a stack of DS4243's are both cabled to the wrong nodes. Filer1 SAS port 3a goes to the circle port on IOM B instead of IOM A and visa versa. Do I have to take the entire cluster down to fix this?
Thanks,
--Carl
Hi Carl,
can you post the output of `sasadmin shelf` and `storage show disk -p` of both filers?
Best,
Alexander Griesser System-Administrator
ANEXIA Internetdienstleistungs GmbH
Telefon: +43-5-0556-320 Telefax: +43-5-0556-500
E-Mail: ag@anexia.atmailto:ag@anexia.at Web: http://www.anexia.athttp://www.anexia.at/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] Im Auftrag von Carl Howell Gesendet: Donnerstag, 03. April 2014 23:25 An: toasters@teaparty.net Betreff: FAS3240c SAS Cabling Question
I have a FAS3240c that has been running for years. I noticed today, while putting in some new shelves, that the IOM modules in the last shelf of a stack of DS4243's are both cabled to the wrong nodes. Filer1 SAS port 3a goes to the circle port on IOM B instead of IOM A and visa versa. Do I have to take the entire cluster down to fix this? Thanks, --Carl
-
Alexander Griesser -
Carl Howell