AW: X1144A - No link - toasters

27 Jan 2017


      Yes, already tried that.
Here’s the –instance output of those ports:
SAN01::*> net port show -port e2* -instance
  (network port show)
Node: SAN01-01
                                        Port: e2a
                                        Link: down
                                         MTU: 1500
             Auto-Negotiation Administrative: true
                Auto-Negotiation Operational: true
                  Duplex Mode Administrative: auto
                     Duplex Mode Operational: half
                        Speed Administrative: auto
                           Speed Operational: 10
                 Flow Control Administrative: full
                    Flow Control Operational: none
                                 MAC Address: 3c:fd:fe:a2:90:c8
                           Up Administrative: true
                            Autorevert Delay: -
                                   Port Type: physical
                 Interface Group Parent Node: -
                 Interface Group Parent Port: -
                       Distribution Function: -
                               Create Policy: -
                            Parent VLAN Node: -
                            Parent VLAN Port: -
                                    VLAN Tag: -
                            Remote Device ID: -
                                IPspace Name: Default
                                   DCB State: incapable
                            Broadcast Domain: -
                          MTU Administrative: 1500
                          Port Health Status: -
                   Ignore Port Health Status: false
                Port Health Degraded Reasons: -
[…]
Node: SAN01-02
                                        Port: e2a
                                        Link: down
                                         MTU: 1500
             Auto-Negotiation Administrative: true
                Auto-Negotiation Operational: true
                  Duplex Mode Administrative: auto
                     Duplex Mode Operational: half
                        Speed Administrative: auto
                           Speed Operational: 10
                 Flow Control Administrative: full
                    Flow Control Operational: none
                                 MAC Address: 3c:fd:fe:a2:8f:a0
                           Up Administrative: true
                            Autorevert Delay: -
                                   Port Type: physical
                 Interface Group Parent Node: -
                 Interface Group Parent Port: -
                       Distribution Function: -
                               Create Policy: -
                            Parent VLAN Node: -
                            Parent VLAN Port: -
                                    VLAN Tag: -
                            Remote Device ID: -
                                IPspace Name: Default
                                   DCB State: incapable
                            Broadcast Domain: -
                          MTU Administrative: 1500
                          Port Health Status: -
                   Ignore Port Health Status: false
                Port Health Degraded Reasons: -
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com
Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: CPO [mailto:cavinoquin@gmail.com]
Gesendet: Freitag, 27. Januar 2017 14:18
An: Alexander Griesser AGriesser@anexia-it.com
Betreff: Re: X1144A - No link
Did you try to status-admin-up the interface?
On Jan 27, 2017 4:20 AM, "Alexander Griesser" <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> wrote:
Hi,
I’ve just installed those fancy X1144A cards in one of our AFF300 systems and it seems they’re getting recognized properly, but I’m not able to get a link on them.
sysconfig says:
slot 2: 40 Gigabit Ethernet Controller XL710 QSFP+
                e2a MAC Address:    3c:fd:fe:a2:90:c8 (auto-unknown-down)
                e2e MAC Address:    3c:fd:fe:a2:90:c9 (auto-unknown-down)
SAN01::> net port show -port e2*
  (network port show)
Node: SAN01-01
                                                  Speed(Mbps) Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e2a       Default      -                down 1500  auto/10    -
e2e       Default      -                down 1500  auto/10    -
Node: SAN01-02
                                                  Speed(Mbps) Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e2a       Default      -                down 1500  auto/10    -
e2e       Default      -                down 1500  auto/10    -
4 entries were displayed.
For testing purposes, I did connect e2a on node1 to e2a on node 2 and I already tried exchanging the QSFPs and cables, but still no dice.
Any idea what could be wrong here?
According to HWU, the minimum required OS version is 9.1RC2, which is exactly what is installed currently:
SAN01::> version
NetApp Release 9.1RC2: Thu Nov 24 08:59:46 UTC 2016
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com
Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
_______________________________________________
Toasters mailing list
Toasters@teaparty.netmailto:Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters