Any ideas...???
Very few, since I still don't understand your problem. My literal interpretation is that you want to use Data ONTAP to manage your hsv200.
I don't see how, if NetApp added an NFS client this would allow you to manage the hsv200.
--- Xishan xischaune@yahoo.com wrote:
ok the actual problem is that i have an HP SAN (hsv200) running comandview EVA software on HP DL380 Storage server. The operating sys on storage server is Win2003 server r2. I am trying to integrate the HP SAN with ONTAP. i want to maintain ONTAP as a single admin point and not talk to HP SAN through commandview EVA. So one of the solutions that came to my mind was to make a qtree in ONTAP and mount it through NFS onto the HP SAN. So it will be a NFS Client (ONTAP) - NFS Server (commandview EVA) environment.
Any ideas...??? Thanx in advance
Mike Eisler email2mre-toasters@yahoo.com wrote: --- Xishan wrote:
Hello... Is there any way to configure ONTAP as an NFS client...through web interface or command line...???
No.
i want to mount a SUN SOLARIS system (as NFS client) on ONTAP ABC qtree (using the mount command on SUN SOLARIS)...and then further mount the ABC volume/qtree of the filer (as NFS client) onto a
UNIX
system...any ideas or suggestions...
I'm intrigued. What problem are you trying to solve?
Thanx
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
I don't want to recall that you have always strange and really curious questions that cause me doubts about you skills but this last is really surprising.
First you speak about Sun Solaris NFS and now about EVA storage serving a SAN composed by W2K3 hosts...you have a lot of confusions between NAS and SAN, between o.s.native disk management and others...
If you want a 'seriuos' answer to you questions is that you cannot multiply apples with eggs :-) But if you want to forget the EVA world there's a solution...very expensive!
Format you EVA storage as new, put a VFiler in front of it and use the HP LUNs as OnTAP disks... ;-)
Bye,
-----Messaggio originale----- Da: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] Per conto di Mike Eisler Inviato: martedì 29 aprile 2008 19.05 A: toasters@mathworks.com Oggetto: Re: ONTAP as nfs client
Any ideas...???
Very few, since I still don't understand your problem. My literal interpretation is that you want to use Data ONTAP to manage your hsv200.
I don't see how, if NetApp added an NFS client this would allow you to manage the hsv200.
--- Xishan xischaune@yahoo.com wrote:
ok the actual problem is that i have an HP SAN (hsv200) running comandview EVA software on HP DL380 Storage server. The operating sys on storage server is Win2003 server r2. I am trying to integrate the HP SAN with ONTAP. i want to maintain ONTAP as a single admin point and not talk to HP SAN through commandview EVA. So one of the solutions that came to my mind was to make a qtree in ONTAP and mount it through NFS onto the HP SAN. So it will be a NFS Client (ONTAP) - NFS Server (commandview EVA) environment.
Any ideas...??? Thanx in advance
Mike Eisler email2mre-toasters@yahoo.com wrote: --- Xishan wrote:
Hello... Is there any way to configure ONTAP as an NFS client...through web interface or command line...???
No.
i want to mount a SUN SOLARIS system (as NFS client) on ONTAP ABC qtree (using the mount command on SUN SOLARIS)...and then further mount the ABC volume/qtree of the filer (as NFS client) onto a
UNIX
system...any ideas or suggestions...
I'm intrigued. What problem are you trying to solve?
Thanx
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
Maybe Xishan is searching for NetApps Vseries. I think it can handle HP StorageWorks System but it can't import third party NFS shares. AS far as I know NetApp doesn't have any NFS gateway products to consolidate your nfs servers in one place today.
* http://www.netapp.com/us/products/storage-systems/v6000/ * http://media.netapp.com/documents/v-series.pdf
Mike Eisler wrote:
Any ideas...???
Very few, since I still don't understand your problem. My literal interpretation is that you want to use Data ONTAP to manage your hsv200.
I don't see how, if NetApp added an NFS client this would allow you to manage the hsv200.
I have 2 new 3070HA's running ontap 7.24. When I setup snapmirror, great, it works, love it, etc.
When I go to delete it, no button (not sure why this got missed in the QA process, but whatever) and I see bug 275636, and its fixed in 7.2.4P4 and 7.3
The bug says to remove it from the snapmirror.conf file, which I did, but I still see it in filerview and via the console.
Anything else I am missing other then upgrading to 7.2.4P4?
Thanks in advance.
This is what I've been doing to delete the snapmirror relationships in the absence of the delete button:
-On source, use snapmirror release to release the destination volume (check using snapmirror destinations)
-On target, break snapmirror relationship.
-On target, run snapmirror status -l <vol name> and note the snapshot name
-On target, delete the snapshot you've just recorded from the volume.
-On target, remove the entries for the volume from snapmirror.conf.
This seems to clear it.
Hope this helps Chris
--------------------------------------------------------
Christopher Holloway Lead Consultant Professional Services
Main: +44 (0)1423 519000 Direct: +44 (0)1423 519099 Mobile: +44 (0)7867 783584 Fax: +44 (0)1423 504415
DNS Arrow launches new enhanced customer portal - Inform an e-commerce partner tool to help customers save time and money in procurement. For more information on Inform, please contact your account manager on 0800 983 2525 or register for an account at www.dnsarrow.co.uk/inform
DNS Arrow Nidderdale House Beckwith Knowle Harrogate HG3 1SA www.DNSarrow.co.uk
Email Confidentiality Notice: This message is private and confidential. If you have received this message in error, please notify us and remove it from your system.
"DNS Arrow" means Digital Network Services (UK) Limited, a company registered in England. Company Registration Number 3952678. Registered Office: Nidderdale House, Otley Road, Beckwith Knowle, Harrogate HG3 1SA, UK.
-----Original Message-----
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Klise, Steve Sent: 04 May 2008 04:59 To: toasters@mathworks.com Subject: snapmirror delete question
I have 2 new 3070HA's running ontap 7.24. When I setup snapmirror, great, it works, love it, etc.
When I go to delete it, no button (not sure why this got missed in the QA process, but whatever) and I see bug 275636, and its fixed in 7.2.4P4 and 7.3
The bug says to remove it from the snapmirror.conf file, which I did, but I still see it in filerview and via the console.
Anything else I am missing other then upgrading to 7.2.4P4?
Thanks in advance.
Bottom line is this...
If a snapmirror snapshot exists on any filer, then it shows up in any form of snapmirror status (cli, gui). After breaking/aborting/etc the mirror, make sure the snapmirror snapshots are gone too...that is unless you need them for something.
--tmac
Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: "Holloway, Chris" chris.holloway@DNSArrow.co.uk
Date: Sun, 4 May 2008 07:19:11 To:"Klise, Steve" klises@caminomedical.org, toasters@mathworks.com Subject: RE: snapmirror delete question
This is what I've been doing to delete the snapmirror relationships in the absence of the delete button:
-On source, use snapmirror release to release the destination volume (check using snapmirror destinations)
-On target, break snapmirror relationship.
-On target, run snapmirror status -l <vol name> and note the snapshot name
-On target, delete the snapshot you've just recorded from the volume.
-On target, remove the entries for the volume from snapmirror.conf.
This seems to clear it.
Hope this helps Chris
--------------------------------------------------------
Christopher Holloway Lead Consultant Professional Services
Main: +44 (0)1423 519000 Direct: +44 (0)1423 519099 Mobile: +44 (0)7867 783584 Fax: +44 (0)1423 504415
DNS Arrow launches new enhanced customer portal - Inform an e-commerce partner tool to help customers save time and money in procurement. For more information on Inform, please contact your account manager on 0800 983 2525 or register for an account at www.dnsarrow.co.uk/inform
DNS Arrow Nidderdale House Beckwith Knowle Harrogate HG3 1SA www.DNSarrow.co.uk
Email Confidentiality Notice: This message is private and confidential. If you have received this message in error, please notify us and remove it from your system.
"DNS Arrow" means Digital Network Services (UK) Limited, a company registered in England. Company Registration Number 3952678. Registered Office: Nidderdale House, Otley Road, Beckwith Knowle, Harrogate HG3 1SA, UK.
-----Original Message-----
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Klise, Steve Sent: 04 May 2008 04:59 To: toasters@mathworks.com Subject: snapmirror delete question
I have 2 new 3070HA's running ontap 7.24. When I setup snapmirror, great, it works, love it, etc.
When I go to delete it, no button (not sure why this got missed in the QA process, but whatever) and I see bug 275636, and its fixed in 7.2.4P4 and 7.3
The bug says to remove it from the snapmirror.conf file, which I did, but I still see it in filerview and via the console.
Anything else I am missing other then upgrading to 7.2.4P4?
Thanks in advance.
Thank you!!! Worked like a charm. Really helps if you read the docs!!!
Always learning something about these filers... Great stuff.
Thank you all!
-----Original Message----- From: Holloway, Chris [mailto:chris.holloway@DNSArrow.co.uk] Sent: Saturday, May 03, 2008 11:19 PM To: Klise, Steve; toasters@mathworks.com Subject: RE: snapmirror delete question
This is what I've been doing to delete the snapmirror relationships in the absence of the delete button:
-On source, use snapmirror release to release the destination volume (check using snapmirror destinations)
-On target, break snapmirror relationship.
-On target, run snapmirror status -l <vol name> and note the snapshot name
-On target, delete the snapshot you've just recorded from the volume.
-On target, remove the entries for the volume from snapmirror.conf.
This seems to clear it.
Hope this helps Chris
--------------------------------------------------------
Christopher Holloway Lead Consultant Professional Services
Main: +44 (0)1423 519000 Direct: +44 (0)1423 519099 Mobile: +44 (0)7867 783584 Fax: +44 (0)1423 504415
DNS Arrow launches new enhanced customer portal - Inform an e-commerce partner tool to help customers save time and money in procurement. For more information on Inform, please contact your account manager on 0800 983 2525 or register for an account at www.dnsarrow.co.uk/inform
DNS Arrow Nidderdale House Beckwith Knowle Harrogate HG3 1SA www.DNSarrow.co.uk
Email Confidentiality Notice: This message is private and confidential. If you have received this message in error, please notify us and remove it from your system.
"DNS Arrow" means Digital Network Services (UK) Limited, a company registered in England. Company Registration Number 3952678. Registered Office: Nidderdale House, Otley Road, Beckwith Knowle, Harrogate HG3 1SA, UK.
-----Original Message-----
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Klise, Steve Sent: 04 May 2008 04:59 To: toasters@mathworks.com Subject: snapmirror delete question
I have 2 new 3070HA's running ontap 7.24. When I setup snapmirror, great, it works, love it, etc.
When I go to delete it, no button (not sure why this got missed in the QA process, but whatever) and I see bug 275636, and its fixed in 7.2.4P4 and 7.3
The bug says to remove it from the snapmirror.conf file, which I did, but I still see it in filerview and via the console.
Anything else I am missing other then upgrading to 7.2.4P4?
Thanks in advance.
-
Holloway, Chris -
Klise, Steve -
Mike Eisler -
Milazzo Giacomo -
Stefan Funke -
tmacmd＠gmail.com